Hi Qi,
Thanks for these patches.
See my comment below.
-----Original Message-----
From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Qi Zhang
Sent: Monday, April 02, 2018 06:00
To: tho...@monjalon.net; Ananyev, Konstantin <konstantin.anan...@intel.com>
Cc: dev@dpdk.org; Xing, Beilei <beilei.x...@intel.com>; Wu, Jingjing
<jingjing...@intel.com>; Lu, Wenzhuo <wenzhuo...@intel.com>; Zhang, Qi Z
<qi.z.zh...@intel.com>
Subject: [dpdk-dev] [PATCH v5 1/3] ether: support runtime queue setup
The patch let etherdev driver expose the capability flag through
rte_eth_dev_info_get when it support runtime queue configuraiton, then base on
the flag rte_eth_[rx|tx]_queue_setup could decide continue to setup the queue
or just return fail when device already started.
Signed-off-by: Qi Zhang <qi.z.zh...@intel.com>
---
doc/guides/nics/features.rst | 8 ++++++++ lib/librte_ether/rte_ethdev.c |
30 ++++++++++++++++++------------ lib/librte_ether/rte_ethdev.h | 7 +++++++
3 files changed, 33 insertions(+), 12 deletions(-)
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst index
1b4fb979f..6983faa4e 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -892,7 +892,15 @@ Documentation describes performance values.
See ``dpdk.org/doc/perf/*``.
+.. _nic_features_queue_runtime_setup_capabilities:
+Queue runtime setup capabilities
+---------------------------------
+
+Supports queue setup / release after device started.
+
+* **[provides] rte_eth_dev_info**:
``runtime_queue_config_capa:DEV_RUNTIME_RX_QUEUE_SETUP,DEV_RUNTIME_TX_QUEUE_SETUP``.
+* **[related] API**: ``rte_eth_dev_info_get()``.
.. _nic_features_other:
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 0590f0c10..343b1a6c0 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1425,12 +1425,6 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t
rx_queue_id,
return -EINVAL;
}
- if (dev->data->dev_started) {
- RTE_PMD_DEBUG_TRACE(
- "port %d must be stopped to allow configuration\n",
port_id);
- return -EBUSY;
- }
-
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_setup, -ENOTSUP);
@@ -1474,6 +1468,15 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t
rx_queue_id,
return -EINVAL;
}
+ if (dev->data->dev_started &&
+ !(dev_info.runtime_queue_setup_capa &
+ DEV_RUNTIME_RX_QUEUE_SETUP))
+ return -EBUSY;
+
+ if (dev->data->rx_queue_state[rx_queue_id] !=
+ RTE_ETH_QUEUE_STATE_STOPPED)
+ return -EBUSY;
+
rxq = dev->data->rx_queues;
if (rxq[rx_queue_id]) {
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release,
@@ -1573,12 +1576,6 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t
tx_queue_id,
return -EINVAL;
}
- if (dev->data->dev_started) {
- RTE_PMD_DEBUG_TRACE(
- "port %d must be stopped to allow configuration\n",
port_id);
- return -EBUSY;
- }
-
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_setup, -ENOTSUP);
@@ -1596,6 +1593,15 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t
tx_queue_id,
return -EINVAL;
}
+ if (dev->data->dev_started &&
+ !(dev_info.runtime_queue_setup_capa &
+ DEV_RUNTIME_TX_QUEUE_SETUP))
+ return -EBUSY;
+
[Rami Rosen] Shouldn't it be here: dev->data->tx_queue_state[...] instead of:
dev->data->rx_queue_state[...] ? we are dealing with
the TX queue.
+ if (dev->data->rx_queue_state[tx_queue_id] !=
+ RTE_ETH_QUEUE_STATE_STOPPED)
+ return -EBUSY;
+
txq = dev->data->tx_queues;
if (txq[tx_queue_id]) {
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release,
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 036153306..4e2088458 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -981,6 +981,11 @@ struct rte_eth_conf {
*/
#define DEV_TX_OFFLOAD_SECURITY 0x00020000
+#define DEV_RUNTIME_RX_QUEUE_SETUP 0x00000001 /**< Deferred setup rx
+queue */ #define DEV_RUNTIME_TX_QUEUE_SETUP 0x00000002 /**< Deferred
+setup tx queue */
+
/*
* If new Tx offload capabilities are defined, they also must be
* mentioned in rte_tx_offload_names in rte_ethdev.c file.
@@ -1029,6 +1034,8 @@ struct rte_eth_dev_info {
/** Configured number of rx/tx queues */
uint16_t nb_rx_queues; /**< Number of RX queues. */
uint16_t nb_tx_queues; /**< Number of TX queues. */
+ uint64_t runtime_queue_setup_capa;
+ /**< queues can be setup after dev_start (DEV_DEFERRED_). */
};
/**
--
2.13.6
