This patch set introduces support for selective datapath in DPDK vhost-user
lib. vDPA stands for vhost Data Path Acceleration. The idea is to support
virtio ring compatible devices to serve virtio driver directly to enable
datapath acceleration.
A set of device ops is defined for device specific operations:
a. get_queue_num: Called to get supported queue number of the device.
b. get_features: Called to get supported features of the device.
c. get_protocol_features: Called to get supported protocol features of
the device.
d. dev_conf: Called to configure the actual device when the virtio
device becomes ready.
e. dev_close: Called to close the actual device when the virtio device
is stopped.
f. set_vring_state: Called to change the state of the vring in the
actual device when vring state changes.
g. set_features: Called to set the negotiated features to device.
h. migration_done: Called to allow the device to response to RARP
sending.
i. get_vfio_group_fd: Called to get the VFIO group fd of the device.
j. get_vfio_device_fd: Called to get the VFIO device fd of the device.
k. get_notify_area: Called to get the notify area info of the queue.
Signed-off-by: Zhihong Wang <zhihong.w...@intel.com>
---
Changes in v5:
1. Rename the vDPA device ops to follow convention.
2. Improve sanity check.
---
Changes in v4:
1. Remove the "engine" concept in the lib.
---
Changes in v2:
1. Add VFIO related vDPA device ops.
lib/librte_vhost/Makefile | 4 +-
lib/librte_vhost/rte_vdpa.h | 87 +++++++++++++++++++++++++
lib/librte_vhost/rte_vhost_version.map | 7 ++
lib/librte_vhost/vdpa.c | 115 +++++++++++++++++++++++++++++++++
4 files changed, 211 insertions(+), 2 deletions(-)
create mode 100644 lib/librte_vhost/rte_vdpa.h
create mode 100644 lib/librte_vhost/vdpa.c
diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
index 5d6c6abae..37044ac03 100644
--- a/lib/librte_vhost/Makefile
+++ b/lib/librte_vhost/Makefile
@@ -22,9 +22,9 @@ LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_ethdev
-lrte_net
# all source are stored in SRCS-y
SRCS-$(CONFIG_RTE_LIBRTE_VHOST) := fd_man.c iotlb.c socket.c vhost.c \
- vhost_user.c virtio_net.c
+ vhost_user.c virtio_net.c vdpa.c
# install includes
-SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h rte_vdpa.h
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_vhost/rte_vdpa.h b/lib/librte_vhost/rte_vdpa.h
new file mode 100644
index 000000000..90465ca26
--- /dev/null
+++ b/lib/librte_vhost/rte_vdpa.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _RTE_VDPA_H_
+#define _RTE_VDPA_H_
+
+/**
+ * @file
+ *
+ * Device specific vhost lib
+ */
+
+#include <rte_pci.h>
+#include "rte_vhost.h"
+
+#define MAX_VDPA_NAME_LEN 128
+
+enum vdpa_addr_type {
+ PCI_ADDR,
+ VDPA_ADDR_MAX
+};
+
+struct rte_vdpa_dev_addr {
+ enum vdpa_addr_type type;
+ union {
+ uint8_t __dummy[64];
+ struct rte_pci_addr pci_addr;
+ };
+};
+
+struct rte_vdpa_dev_ops {
+ /* Get capabilities of this device */
+ int (*get_queue_num)(int did, uint32_t *queue_num);
+ int (*get_features)(int did, uint64_t *features);
+ int (*get_protocol_features)(int did, uint64_t *protocol_features);
+
+ /* Driver configure/close the device */
+ int (*dev_conf)(int vid);
+ int (*dev_close)(int vid);
+
+ /* Enable/disable this vring */
+ int (*set_vring_state)(int vid, int vring, int state);
+
+ /* Set features when changed */
+ int (*set_features)(int vid);
+
+ /* Destination operations when migration done */
+ int (*migration_done)(int vid);
+
+ /* Get the vfio group fd */
+ int (*get_vfio_group_fd)(int vid);
+
+ /* Get the vfio device fd */
+ int (*get_vfio_device_fd)(int vid);
+
+ /* Get the notify area info of the queue */
+ int (*get_notify_area)(int vid, int qid,
+ uint64_t *offset, uint64_t *size);
+
+ /* Reserved for future extension */
+ void *reserved[5];
+};
+
+struct rte_vdpa_device {
+ struct rte_vdpa_dev_addr addr;
+ struct rte_vdpa_dev_ops *ops;
+} __rte_cache_aligned;
+
+/* Register a vdpa device, return did if successful, -1 on failure */
+int __rte_experimental
+rte_vdpa_register_device(struct rte_vdpa_dev_addr *addr,
+ struct rte_vdpa_dev_ops *ops);
+
+/* Unregister a vdpa device, return -1 on failure */
+int __rte_experimental
+rte_vdpa_unregister_device(int did);
+
+/* Find did of a vdpa device, return -1 on failure */
+int __rte_experimental
+rte_vdpa_find_device_id(struct rte_vdpa_dev_addr *addr);
+
+/* Find a vdpa device based on did */
+struct rte_vdpa_device * __rte_experimental
+rte_vdpa_get_device(int did);
+
+#endif /* _RTE_VDPA_H_ */
diff --git a/lib/librte_vhost/rte_vhost_version.map
b/lib/librte_vhost/rte_vhost_version.map
index df0103129..d3453a2a7 100644
--- a/lib/librte_vhost/rte_vhost_version.map
+++ b/lib/librte_vhost/rte_vhost_version.map
@@ -59,3 +59,10 @@ DPDK_18.02 {
rte_vhost_vring_call;
} DPDK_17.08;
+
+EXPERIMENTAL {
+ rte_vdpa_register_device;
+ rte_vdpa_unregister_device;
+ rte_vdpa_find_device_id;
+ rte_vdpa_get_device;
+} DPDK_18.02;
diff --git a/lib/librte_vhost/vdpa.c b/lib/librte_vhost/vdpa.c
new file mode 100644
index 000000000..4b339b1c2
--- /dev/null
+++ b/lib/librte_vhost/vdpa.c
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+/**
+ * @file
+ *
+ * Device specific vhost lib
+ */
+
+#include <stdbool.h>
+
+#include <rte_malloc.h>
+#include "rte_vdpa.h"
+#include "vhost.h"
+
+static struct rte_vdpa_device *vdpa_devices[MAX_VHOST_DEVICE];
+static uint32_t vdpa_device_num;
+
+static bool
+is_same_vdpa_device(struct rte_vdpa_dev_addr *a,
+ struct rte_vdpa_dev_addr *b)
+{
+ bool ret = true;
+
+ if (a->type != b->type)
+ return false;
+
+ switch (a->type) {
+ case PCI_ADDR:
+ if (a->pci_addr.domain != b->pci_addr.domain ||
+ a->pci_addr.bus != b->pci_addr.bus ||
+ a->pci_addr.devid != b->pci_addr.devid ||
+ a->pci_addr.function != b->pci_addr.function)
+ ret = false;
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+int
+rte_vdpa_register_device(struct rte_vdpa_dev_addr *addr,
+ struct rte_vdpa_dev_ops *ops)
+{
+ struct rte_vdpa_device *dev;
+ char device_name[MAX_VDPA_NAME_LEN];
+ int i;
+
+ if (vdpa_device_num >= MAX_VHOST_DEVICE)
+ return -1;
+
+ for (i = 0; i < MAX_VHOST_DEVICE; i++) {
+ if (vdpa_devices[i] && is_same_vdpa_device(addr,
+ &vdpa_devices[i]->addr))
+ return -1;
+ }
+
+ for (i = 0; i < MAX_VHOST_DEVICE; i++) {
+ if (vdpa_devices[i] == NULL)
+ break;
+ }
+
+ sprintf(device_name, "vdpa-dev-%d", i);
+ dev = rte_zmalloc(device_name, sizeof(struct rte_vdpa_device),
+ RTE_CACHE_LINE_SIZE);
+ if (!dev)
+ return -1;
+
+ memcpy(&dev->addr, addr, sizeof(struct rte_vdpa_dev_addr));
+ dev->ops = ops;
+ vdpa_devices[i] = dev;
+ vdpa_device_num++;
+
+ return i;
+}
+
+int
+rte_vdpa_unregister_device(int did)
+{
+ if (did < 0 || did >= MAX_VHOST_DEVICE || vdpa_devices[did] == NULL)
+ return -1;
+
+ rte_free(vdpa_devices[did]);
+ vdpa_devices[did] = NULL;
+ vdpa_device_num--;
+
+ return did;
+}
+
+int
+rte_vdpa_find_device_id(struct rte_vdpa_dev_addr *addr)
+{
+ struct rte_vdpa_device *dev;
+ int i;
+
+ for (i = 0; i < MAX_VHOST_DEVICE; ++i) {
+ dev = vdpa_devices[i];
+ if (dev && is_same_vdpa_device(&dev->addr, addr) == 0)
+ return i;
+ }
+
+ return -1;
+}
+
+struct rte_vdpa_device *
+rte_vdpa_get_device(int did)
+{
+ if (did < 0 || did >= MAX_VHOST_DEVICE)
+ return NULL;
+
+ return vdpa_devices[did];
+}
--
2.13.6
