> -----Original Message-----
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Zhang, Qi Z
> Sent: Thursday, March 15, 2018 11:22 AM
> To: Ananyev, Konstantin <konstantin.anan...@intel.com>;
> tho...@monjalon.net
> Cc: dev@dpdk.org; Xing, Beilei <beilei.x...@intel.com>; Wu, Jingjing
> <jingjing...@intel.com>; Lu, Wenzhuo <wenzhuo...@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v2 4/4] net/i40e: enable deferred queue
> setup
>
>
>
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Wednesday, March 14, 2018 8:36 PM
> > To: Zhang, Qi Z <qi.z.zh...@intel.com>; tho...@monjalon.net
> > Cc: dev@dpdk.org; Xing, Beilei <beilei.x...@intel.com>; Wu, Jingjing
> > <jingjing...@intel.com>; Lu, Wenzhuo <wenzhuo...@intel.com>; Zhang,
> Qi
> > Z <qi.z.zh...@intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 4/4] net/i40e: enable deferred queue
> > setup
> >
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Qi Zhang
> > > Sent: Friday, March 2, 2018 4:13 AM
> > > To: tho...@monjalon.net
> > > Cc: dev@dpdk.org; Xing, Beilei <beilei.x...@intel.com>; Wu, Jingjing
> > > <jingjing...@intel.com>; Lu, Wenzhuo <wenzhuo...@intel.com>; Zhang,
> > Qi
> > > Z <qi.z.zh...@intel.com>
> > > Subject: [dpdk-dev] [PATCH v2 4/4] net/i40e: enable deferred queue
> > > setup
> > >
> > > Expose the deferred queue configuration capability and enhance
> > > i40e_dev_[rx|tx]_queue_[setup|release] to handle the situation when
> > > device already started.
> > >
> > > Signed-off-by: Qi Zhang <qi.z.zh...@intel.com>
> > > ---
> > > drivers/net/i40e/i40e_ethdev.c | 6 ++++
> > > drivers/net/i40e/i40e_rxtx.c | 62
> > ++++++++++++++++++++++++++++++++++++++++--
> > > 2 files changed, 66 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > > b/drivers/net/i40e/i40e_ethdev.c index 06b0f03a1..843a0c42a 100644
> > > --- a/drivers/net/i40e/i40e_ethdev.c
> > > +++ b/drivers/net/i40e/i40e_ethdev.c
> > > @@ -3195,6 +3195,12 @@ i40e_dev_info_get(struct rte_eth_dev *dev,
> > struct rte_eth_dev_info *dev_info)
> > > DEV_TX_OFFLOAD_GRE_TNL_TSO |
> > > DEV_TX_OFFLOAD_IPIP_TNL_TSO |
> > > DEV_TX_OFFLOAD_GENEVE_TNL_TSO;
> > > + dev_info->deferred_queue_config_capa =
> > > + DEV_DEFERRED_RX_QUEUE_SETUP |
> > > + DEV_DEFERRED_TX_QUEUE_SETUP |
> > > + DEV_DEFERRED_RX_QUEUE_RELEASE |
> > > + DEV_DEFERRED_TX_QUEUE_RELEASE;
> > > +
> > > dev_info->hash_key_size = (I40E_PFQF_HKEY_MAX_INDEX + 1) *
> > > sizeof(uint32_t);
> > > dev_info->reta_size = pf->hash_lut_size; diff --git
> > > a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c index
> > > 1217e5a61..e5f532cf7 100644
> > > --- a/drivers/net/i40e/i40e_rxtx.c
> > > +++ b/drivers/net/i40e/i40e_rxtx.c
> > > @@ -1712,6 +1712,7 @@ i40e_dev_rx_queue_setup(struct rte_eth_dev
> > *dev,
> > > uint16_t len, i;
> > > uint16_t reg_idx, base, bsf, tc_mapping;
> > > int q_offset, use_def_burst_func = 1;
> > > + int ret = 0;
> > >
> > > if (hw->mac.type == I40E_MAC_VF || hw->mac.type ==
> > I40E_MAC_X722_VF) {
> > > vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
> > > @@ -1841,6 +1842,25 @@ i40e_dev_rx_queue_setup(struct
> rte_eth_dev
> > *dev,
> > > rxq->dcb_tc = i;
> > > }
> > >
> > > + if (dev->data->dev_started) {
> > > + ret = i40e_rx_queue_init(rxq);
> > > + if (ret != I40E_SUCCESS) {
> > > + PMD_DRV_LOG(ERR,
> > > + "Failed to do RX queue initialization");
> > > + return ret;
> > > + }
> > > + if (ad->rx_vec_allowed)
> >
> > Better to check what rx function is installed right now.
> Yes, it should be fixed, need to return fail if any conflict
Sorry, For i40e, I think rx function set is not impacted by queue_setup
parameters but only dev_configure's, so it's not necessary to check installed
function, and there will be no conflict here.
> >
> > > + i40e_rxq_vec_setup(rxq);
> > > + if (!rxq->rx_deferred_start) {
> > > + ret = i40e_dev_rx_queue_start(dev, queue_idx);
> >
> > I don't think it is a good idea to start/stop queue inside
> > queue_setup/queue_release.
> > There is special API (queue_start/queue_stop) to do this.
>
> The idea is if dev already started, the queue is supposed to be started
> automatically after queue_setup.
> The defered_start flag can be used if application don't want this.
> But maybe it's better to call dev_ops->rx_queue_stop in etherdev layer.
> (same thing for queue_stop in previous patch)
>
> Thanks
> Qi
>
> > Konstantin
> >
> > > + if (ret != I40E_SUCCESS) {
> > > + PMD_DRV_LOG(ERR,
> > > + "Failed to start RX queue");
> > > + return ret;
> > > + }
> > > + }
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -1848,13 +1868,21 @@ void
> > > i40e_dev_rx_queue_release(void *rxq) {
> > > struct i40e_rx_queue *q = (struct i40e_rx_queue *)rxq;
> > > + struct rte_eth_dev *dev = &rte_eth_devices[q->port_id];
> > >
> > > if (!q) {
> > > PMD_DRV_LOG(DEBUG, "Pointer to rxq is NULL");
> > > return;
> > > }
> > >
> > > - i40e_rx_queue_release_mbufs(q);
> > > + if (dev->data->dev_started) {
> > > + if (dev->data->rx_queue_state[q->queue_id] ==
> > > + RTE_ETH_QUEUE_STATE_STARTED)
> > > + i40e_dev_rx_queue_stop(dev, q->queue_id);
> > > + } else {
> > > + i40e_rx_queue_release_mbufs(q);
> > > + }
> > > +
> > > rte_free(q->sw_ring);
> > > rte_free(q);
> > > }
> > > @@ -1980,6 +2008,8 @@ i40e_dev_tx_queue_setup(struct rte_eth_dev
> > *dev,
> > > const struct rte_eth_txconf *tx_conf) {
> > > struct i40e_hw *hw =
> > I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > > + struct i40e_adapter *ad =
> > > + I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> > > struct i40e_vsi *vsi;
> > > struct i40e_pf *pf = NULL;
> > > struct i40e_vf *vf = NULL;
> > > @@ -1989,6 +2019,7 @@ i40e_dev_tx_queue_setup(struct rte_eth_dev
> > *dev,
> > > uint16_t tx_rs_thresh, tx_free_thresh;
> > > uint16_t reg_idx, i, base, bsf, tc_mapping;
> > > int q_offset;
> > > + int ret = 0;
> > >
> > > if (hw->mac.type == I40E_MAC_VF || hw->mac.type ==
> > I40E_MAC_X722_VF) {
> > > vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
> > > @@ -2162,6 +2193,25 @@ i40e_dev_tx_queue_setup(struct
> rte_eth_dev
> > *dev,
> > > txq->dcb_tc = i;
> > > }
> > >
> > > + if (dev->data->dev_started) {
> > > + ret = i40e_tx_queue_init(txq);
> > > + if (ret != I40E_SUCCESS) {
> > > + PMD_DRV_LOG(ERR,
> > > + "Failed to do TX queue initialization");
> > > + return ret;
> > > + }
> > > + if (ad->tx_vec_allowed)
> > > + i40e_txq_vec_setup(txq);
> > > + if (!txq->tx_deferred_start) {
> > > + ret = i40e_dev_tx_queue_start(dev, queue_idx);
> > > + if (ret != I40E_SUCCESS) {
> > > + PMD_DRV_LOG(ERR,
> > > + "Failed to start TX queue");
> > > + return ret;
> > > + }
> > > + }
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -2169,13 +2219,21 @@ void
> > > i40e_dev_tx_queue_release(void *txq)
> > > {
> > > struct i40e_tx_queue *q = (struct i40e_tx_queue *)txq;
> > > + struct rte_eth_dev *dev = &rte_eth_devices[q->port_id];
> > >
> > > if (!q) {
> > > PMD_DRV_LOG(DEBUG, "Pointer to TX queue is NULL");
> > > return;
> > > }
> > >
> > > - i40e_tx_queue_release_mbufs(q);
> > > + if (dev->data->dev_started) {
> > > + if (dev->data->tx_queue_state[q->queue_id] ==
> > > + RTE_ETH_QUEUE_STATE_STARTED)
> > > + i40e_dev_tx_queue_stop(dev, q->queue_id);
> > > + } else {
> > > + i40e_tx_queue_release_mbufs(q);
> > > + }
> > > +
> > > rte_free(q->sw_ring);
> > > rte_free(q);
> > > }
> > > --
> > > 2.13.6
