priv_get_num_vfs() was used to help the PMD in prefetching the mbuf in
datapath when the PMD was behaving in VF mode.
This knowledge is no more used.
Fixes: 528a9fbec6de ("net/mlx5: support ConnectX-5 devices")
Cc: ys...@mellanox.com
Signed-off-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarg...@6wind.com>
---
drivers/net/mlx5/mlx5.c | 18 ++----------------
drivers/net/mlx5/mlx5.h | 2 --
drivers/net/mlx5/mlx5_ethdev.c | 37 -------------------------------------
3 files changed, 2 insertions(+), 55 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 61cb93101..7e8a214ce 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -578,7 +578,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct
rte_pci_device *pci_dev)
int err = 0;
struct ibv_context *attr_ctx = NULL;
struct ibv_device_attr_ex device_attr;
- unsigned int sriov;
unsigned int mps;
unsigned int cqe_comp;
unsigned int tunnel_en = 0;
@@ -625,18 +624,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct
rte_pci_device *pci_dev)
(pci_dev->addr.devid != pci_addr.devid) ||
(pci_dev->addr.function != pci_addr.function))
continue;
- sriov = ((pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF));
- INFO("PCI information matches, using device \"%s\""
- " (SR-IOV: %s)",
- list[i]->name,
- sriov ? "true" : "false");
+ INFO("PCI information matches, using device \"%s\"",
+ list[i]->name);
attr_ctx = mlx5_glue->open_device(list[i]);
err = errno;
break;
@@ -709,7 +698,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct
rte_pci_device *pci_dev)
struct rte_eth_dev *eth_dev;
struct ibv_device_attr_ex device_attr_ex;
struct ether_addr mac;
- uint16_t num_vfs = 0;
struct ibv_device_attr_ex device_attr;
struct mlx5_dev_config config = {
.cqe_comp = cqe_comp,
@@ -870,8 +858,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct
rte_pci_device *pci_dev)
DEBUG("hardware RX end alignment padding is %ssupported",
(config.hw_padding ? "" : "not "));
- priv_get_num_vfs(priv, &num_vfs);
- config.sriov = (num_vfs || sriov);
config.tso = ((device_attr_ex.tso_caps.max_tso > 0) &&
(device_attr_ex.tso_caps.supported_qpts &
(1 << IBV_QPT_RAW_PACKET)));
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 9ad0533fc..5e90d99cc 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -78,7 +78,6 @@ struct mlx5_dev_config {
unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
unsigned int hw_padding:1; /* End alignment padding is supported. */
- unsigned int sriov:1; /* This is a VF or PF with VF devices. */
unsigned int mps:2; /* Multi-packet send supported mode. */
unsigned int tunnel_en:1;
/* Whether tunnel stateless offloads are supported. */
@@ -209,7 +208,6 @@ struct priv *mlx5_get_priv(struct rte_eth_dev *dev);
int mlx5_is_secondary(void);
int priv_get_ifname(const struct priv *, char (*)[IF_NAMESIZE]);
int priv_ifreq(const struct priv *, int req, struct ifreq *);
-int priv_get_num_vfs(struct priv *, uint16_t *);
int priv_get_mtu(struct priv *, uint16_t *);
int priv_set_flags(struct priv *, unsigned int, unsigned int);
int mlx5_dev_configure(struct rte_eth_dev *);
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index b73cb53df..f98fc4c3b 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -201,43 +201,6 @@ priv_ifreq(const struct priv *priv, int req, struct ifreq
*ifr)
}
/**
- * Return the number of active VFs for the current device.
- *
- * @param[in] priv
- * Pointer to private structure.
- * @param[out] num_vfs
- * Number of active VFs.
- *
- * @return
- * 0 on success, -1 on failure and errno is set.
- */
-int
-priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
-{
- /* The sysfs entry name depends on the operating system. */
- const char **name = (const char *[]){
- "sriov_numvfs",
- "mlx5_num_vfs",
- NULL,
- };
-
- do {
- int n;
- FILE *file;
- MKSTR(path, "%s/device/%s", priv->ibdev_path, *name);
-
- file = fopen(path, "rb");
- if (!file)
- continue;
- n = fscanf(file, "%" SCNu16, num_vfs);
- fclose(file);
- if (n == 1)
- return 0;
- } while (*(++name));
- return -1;
-}
-
-/**
* Get device MTU.
*
* @param priv
--
2.11.0
