This commit adds the following functionality to failsafe PMD:
* Register and unregister slaves Rx interrupts.
* Enable and Disable slaves Rx interrupts.
The interrupts events generated by the slaves are not handled in this
commit.

Signed-off-by: Moti Haimovsky <mo...@mellanox.com>
---
V5:
Initial version of this patch in accordance to inputs from Gaetan Rivet
in reply to
1516354344-13495-2-git-send-email-mo...@mellanox.com
---
 drivers/net/failsafe/failsafe_ether.c   |   1 +
 drivers/net/failsafe/failsafe_intr.c    | 196 ++++++++++++++++++++++++++++++++
 drivers/net/failsafe/failsafe_ops.c     |  36 +++++-
 drivers/net/failsafe/failsafe_private.h |  16 +++
 4 files changed, 247 insertions(+), 2 deletions(-)

diff --git a/drivers/net/failsafe/failsafe_ether.c 
b/drivers/net/failsafe/failsafe_ether.c
index 8a4cacf..0f1630e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -283,6 +283,7 @@
                return;
        switch (sdev->state) {
        case DEV_STARTED:
+               failsafe_rx_intr_uninstall_subdevice(sdev);
                rte_eth_dev_stop(PORT_ID(sdev));
                sdev->state = DEV_ACTIVE;
                /* fallthrough */
diff --git a/drivers/net/failsafe/failsafe_intr.c 
b/drivers/net/failsafe/failsafe_intr.c
index 2c92d95..2f18b3d 100644
--- a/drivers/net/failsafe/failsafe_intr.c
+++ b/drivers/net/failsafe/failsafe_intr.c
@@ -7,10 +7,198 @@
  * Interrupts handling for failsafe driver.
  */
 
+#include <sys/epoll.h>
 #include <unistd.h>
 
 #include "failsafe_private.h"
 
+#define NUM_RX_PROXIES (FAILSAFE_MAX_ETHPORTS * RTE_MAX_RXTX_INTR_VEC_ID)
+
+/**
+ * Install failsafe Rx event proxy subsystem.
+ * This is the way the failsafe PMD generates Rx events on behalf of its
+ * subdevices.
+ *
+ * @param priv
+ *   Pointer to failsafe private structure.
+ * @return
+ *   0 on success, negative errno value otherwise and rte_errno is set.
+ */
+static int
+fs_rx_event_proxy_install(struct fs_priv *priv)
+{
+       int rc = 0;
+
+       /*
+        * Create the epoll fd and event vector for the proxy service to
+        * wait on for Rx events generated by the subdevices.
+        */
+       priv->rxp.efd = epoll_create1(0);
+       if (priv->rxp.efd < 0) {
+               rte_errno = errno;
+               ERROR("Failed to create epoll,"
+                     " Rx interrupts will not be supported");
+               return -rte_errno;
+       }
+       priv->rxp.evec = calloc(NUM_RX_PROXIES, sizeof(*priv->rxp.evec));
+       if (priv->rxp.evec == NULL) {
+               ERROR("Failed to allocate memory for event vectors,"
+                     " Rx interrupts will not be supported");
+               rc = -ENOMEM;
+               goto error;
+       }
+       return 0;
+error:
+       if (priv->rxp.efd >= 0) {
+               close(priv->rxp.efd);
+               priv->rxp.efd = -1;
+       }
+       if (priv->rxp.evec != NULL) {
+               free(priv->rxp.evec);
+               priv->rxp.evec = NULL;
+       }
+       rte_errno = -rc;
+       return rc;
+}
+
+/**
+ * RX Interrupt control per subdevice.
+ *
+ * @param sdev
+ *   Pointer to sub-device structure.
+ * @param op
+ *   The operation be performed for the vector.
+ *   Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @return
+ *   - On success, zero.
+ *   - On failure, a negative value.
+ */
+static int
+failsafe_eth_rx_intr_ctl_subdevice(struct sub_device *sdev, int op)
+{
+       struct rte_eth_dev *dev;
+       struct rte_eth_dev *fsdev;
+       int epfd;
+       uint16_t pid;
+       uint16_t qid;
+       struct rxq *fsrxq;
+       int rc;
+       int ret = 0;
+
+       if (sdev == NULL || (ETH(sdev) == NULL) ||
+           sdev->fs_dev == NULL || (PRIV(sdev->fs_dev) == NULL)) {
+               ERROR("Called with invalid arguments");
+               return -EINVAL;
+       }
+       dev = ETH(sdev);
+       fsdev = sdev->fs_dev;
+       epfd = PRIV(sdev->fs_dev)->rxp.efd;
+       pid = PORT_ID(sdev);
+
+       if (epfd <= 0) {
+               if (op == RTE_INTR_EVENT_ADD) {
+                       ERROR("Proxy events are not initialized");
+                       return -EBADFD;
+               } else {
+                       return 0;
+               }
+       }
+       if (dev->data->nb_rx_queues > fsdev->data->nb_rx_queues) {
+               ERROR("subdevice has too many queues,"
+                     " Interrupts will not be enabled");
+                       return -E2BIG;
+       }
+       for (qid = 0; qid < dev->data->nb_rx_queues; qid++) {
+               fsrxq = fsdev->data->rx_queues[qid];
+               rc = rte_eth_dev_rx_intr_ctl_q(pid, qid, epfd,
+                                              op, (void *)fsrxq);
+               if (rc) {
+                       ERROR("rte_eth_dev_rx_intr_ctl_q failed for "
+                             "port %d  queue %d, epfd %d, error %d",
+                             pid, qid, epfd, rc);
+                       ret = rc;
+               }
+       }
+       return ret;
+}
+
+/**
+ * Install Rx interrupts subsystem for a subdevice.
+ * This is a support for dynamically adding subdevices.
+ *
+ * @param sdev
+ *   Pointer to subdevice structure.
+ *
+ * @return
+ *   0 on success, negative errno value otherwise and rte_errno is set.
+ */
+int failsafe_rx_intr_install_subdevice(struct sub_device *sdev)
+{
+       int rc;
+       int qid;
+       struct rte_eth_dev *fsdev = sdev->fs_dev;
+       struct rxq **rxq = (struct rxq **)fsdev->data->rx_queues;
+       const struct rte_intr_conf *const intr_conf =
+                               &ETH(sdev)->data->dev_conf.intr_conf;
+
+       if (intr_conf->rxq == 0)
+               return 0;
+       rc = failsafe_eth_rx_intr_ctl_subdevice(sdev, RTE_INTR_EVENT_ADD);
+       if (rc)
+               return rc;
+       /* enable interrupts on already-enabled queues */
+       for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++) {
+               if (rxq[qid]->enable_events) {
+                       int ret = rte_eth_dev_rx_intr_enable(PORT_ID(sdev),
+                                                            qid);
+                       if (ret && (ret != -ENOTSUP)) {
+                               ERROR("Failed to enable interrupts on "
+                                     "port %d queue %d", PORT_ID(sdev), qid);
+                               rc = ret;
+                       }
+               }
+       }
+       return rc;
+}
+
+/**
+ * Uninstall Rx interrupts subsystem for a subdevice.
+ * This is a support for dynamically removing subdevices.
+ *
+ * @param sdev
+ *   Pointer to subdevice structure.
+ *
+ * @return
+ *   0 on success, negative errno value otherwise and rte_errno is set.
+ */
+void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev)
+{
+       int qid;
+
+       for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++)
+               rte_eth_dev_rx_intr_disable(PORT_ID(sdev), qid);
+       failsafe_eth_rx_intr_ctl_subdevice(sdev, RTE_INTR_EVENT_DEL);
+}
+
+/**
+ * Uninstall failsafe Rx event proxy.
+ *
+ * @param priv
+ *   Pointer to failsafe private structure.
+ */
+static void
+fs_rx_event_proxy_uninstall(struct fs_priv *priv)
+{
+       if (priv->rxp.evec != NULL) {
+               free(priv->rxp.evec);
+               priv->rxp.evec = NULL;
+       }
+       if (priv->rxp.efd > 0) {
+               close(priv->rxp.efd);
+               priv->rxp.efd = -1;
+       }
+}
+
 /**
  * Uninstall failsafe interrupt vector.
  *
@@ -102,7 +290,11 @@
 failsafe_rx_intr_uninstall(struct rte_eth_dev *dev)
 {
        struct fs_priv *priv = PRIV(dev);
+       struct rte_intr_handle *intr_handle;
 
+       intr_handle = &priv->intr_handle;
+       rte_intr_free_epoll_fd(intr_handle);
+       fs_rx_event_proxy_uninstall(priv);
        fs_rx_intr_vec_uninstall(priv);
        dev->intr_handle = NULL;
 }
@@ -127,6 +319,10 @@
                return 0;
        if (fs_rx_intr_vec_install(priv) < 0)
                return -rte_errno;
+       if (fs_rx_event_proxy_install(priv) < 0) {
+               fs_rx_intr_vec_uninstall(priv);
+               return -rte_errno;
+       }
        dev->intr_handle = &priv->intr_handle;
        return 0;
 }
diff --git a/drivers/net/failsafe/failsafe_ops.c 
b/drivers/net/failsafe/failsafe_ops.c
index d6a82b3..2ea9cdd 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -214,6 +214,13 @@
                                continue;
                        return ret;
                }
+               ret = failsafe_rx_intr_install_subdevice(sdev);
+               if (ret) {
+                       if (!fs_err(sdev, ret))
+                               continue;
+                       rte_eth_dev_stop(PORT_ID(sdev));
+                       return ret;
+               }
                sdev->state = DEV_STARTED;
        }
        if (PRIV(dev)->state < DEV_STARTED)
@@ -231,6 +238,7 @@
        PRIV(dev)->state = DEV_STARTED - 1;
        FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
                rte_eth_dev_stop(PORT_ID(sdev));
+               failsafe_rx_intr_uninstall_subdevice(sdev);
                sdev->state = DEV_STARTED - 1;
        }
        failsafe_rx_intr_uninstall(dev);
@@ -413,6 +421,10 @@
 fs_rx_intr_enable(struct rte_eth_dev *dev, uint16_t idx)
 {
        struct rxq *rxq;
+       struct sub_device *sdev;
+       uint8_t i;
+       int ret;
+       int rc = 0;
 
        if (idx >= dev->data->nb_rx_queues) {
                rte_errno = EINVAL;
@@ -424,14 +436,26 @@
                return -rte_errno;
        }
        rxq->enable_events = 1;
-       return 0;
+       FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+               ret = rte_eth_dev_rx_intr_enable(PORT_ID(sdev), idx);
+               ret = fs_err(sdev, ret);
+               if (ret)
+                       rc = ret;
+       }
+       if (rc)
+               rte_errno = -rc;
+       return rc;
 }
 
 static int
 fs_rx_intr_disable(struct rte_eth_dev *dev, uint16_t idx)
 {
        struct rxq *rxq;
+       struct sub_device *sdev;
        uint64_t u64;
+       uint8_t i;
+       int rc = 0;
+       int ret;
 
        if (idx >= dev->data->nb_rx_queues) {
                rte_errno = EINVAL;
@@ -443,10 +467,18 @@
                return -rte_errno;
        }
        rxq->enable_events = 0;
+       FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+               ret = rte_eth_dev_rx_intr_disable(PORT_ID(sdev), idx);
+               ret = fs_err(sdev, ret);
+               if (ret)
+                       rc = ret;
+       }
        /* Clear pending events */
        while (read(rxq->event_fd, &u64, sizeof(uint64_t)) >  0)
                ;
-       return 0;
+       if (rc)
+               rte_errno = -rc;
+       return rc;
 }
 
 static bool
diff --git a/drivers/net/failsafe/failsafe_private.h 
b/drivers/net/failsafe/failsafe_private.h
index 419e5e7..ff78b9f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -63,6 +63,13 @@
 
 /* TYPES */
 
+struct rx_proxy {
+       /* epoll file descriptor */
+       int efd;
+       /* event vector to be used by epoll */
+       struct rte_epoll_event *evec;
+};
+
 struct rxq {
        struct fs_priv *priv;
        uint16_t qid;
@@ -158,6 +165,13 @@ struct fs_priv {
         */
        enum dev_state state;
        struct rte_eth_stats stats_accumulator;
+       /*
+        * Rx interrupts/events proxy.
+        * The PMD issues Rx events to the EAL on behalf of its subdevices,
+        * it does that by registering an event-fd for each of its queues with
+        * the EAL.
+        */
+       struct rx_proxy rxp;
        unsigned int pending_alarm:1; /* An alarm is pending */
        /* flow isolation state */
        int flow_isolated:1;
@@ -167,6 +181,8 @@ struct fs_priv {
 
 int failsafe_rx_intr_install(struct rte_eth_dev *dev);
 void failsafe_rx_intr_uninstall(struct rte_eth_dev *dev);
+int failsafe_rx_intr_install_subdevice(struct sub_device *sdev);
+void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev);
 
 /* MISC */
 
-- 
1.8.3.1

Reply via email to