Hi Igor, Thanks for the catch, and glad to see your patch☺ It resolves a potential problem in PMD. The patch looks OK for me except some minor comments (in another mail thread).
Best Regards, Beilei From: Igor Ryzhov [mailto:iryz...@nfware.com] Sent: Thursday, January 11, 2018 6:47 AM To: Zhang, Helin <helin.zh...@intel.com> Cc: Xing, Beilei <beilei.x...@intel.com>; Olivier Matz <olivier.m...@6wind.com>; dev@dpdk.org; Wu, Jingjing <jingjing...@intel.com>; sta...@dpdk.org; Laurent Hardy <laurent.ha...@6wind.com> Subject: Re: [dpdk-dev] [PATCH] net/i40e: fix VSI MAC filter on primary address change Hello everyone. It's sad that my comments were unanswered. I'm ok with the first two – they were mostly style-related. But I made an investigation on the third one and it is a bug. This is a description (from X710 datasheet) of flags sent to mac_address_write command: By bits: 0-7 – Reserved 8 – MAC_MAG_EN 9 – LAA_WOL_PRESERVE 10-13 – Reserved 14-15 – Write type (00 – Update LAA only, 01 – Update LAA and WOL, 10 – Update port address, 11 – Reserved, but used in Linux to enable multicast magic packet wake up) Current code uses 0x3 flag, apparently trying to update LAA, WOL and port address, but it sets first two bits instead of last two. These bits are reserved, that's why it doesn't break anything. At the same time, last two bits are set to zero, and the command changes LAA address only – it's enough to work in simple case. The last question – which flag is correct to use – 01 (LAA + WOL) or 11 (LAA + WOL + port). Linux driver uses the first one, and here is the patch to fix the issue: https://dpdk.org/dev/patchwork/patch/33524/ Best regards, Igor On Wed, Jan 10, 2018 at 4:57 PM, Zhang, Helin <helin.zh...@intel.com<mailto:helin.zh...@intel.com>> wrote: > -----Original Message----- > From: dev [mailto:dev-boun...@dpdk.org<mailto:dev-boun...@dpdk.org>] On > Behalf Of Xing, Beilei > Sent: Thursday, January 4, 2018 1:39 PM > To: Olivier Matz; dev@dpdk.org<mailto:dev@dpdk.org>; Wu, Jingjing > Cc: sta...@dpdk.org<mailto:sta...@dpdk.org>; Laurent Hardy > Subject: Re: [dpdk-dev] [PATCH] net/i40e: fix VSI MAC filter on primary > address > change > > > > > -----Original Message----- > > From: Olivier Matz > > [mailto:olivier.m...@6wind.com<mailto:olivier.m...@6wind.com>] > > Sent: Wednesday, January 3, 2018 10:29 PM > > To: dev@dpdk.org<mailto:dev@dpdk.org>; Wu, Jingjing > > <jingjing...@intel.com<mailto:jingjing...@intel.com>>; Xing, Beilei > > <beilei.x...@intel.com<mailto:beilei.x...@intel.com>> > > Cc: sta...@dpdk.org<mailto:sta...@dpdk.org>; Laurent Hardy > > <laurent.ha...@6wind.com<mailto:laurent.ha...@6wind.com>> > > Subject: [PATCH] net/i40e: fix VSI MAC filter on primary address > > change > > > > When primary address mac is changed, the mac filters were not updated > > in the VSI with the new mac addr and incoming packets with this > > destination address are dropped by the hardware filters. > > > > This patch removes the VSI mac filter for the previous mac address and > > adds a new one for new mac address. > > > > Fixes: e18e01e92c29 ("i40e: support default MAC address setting") > > Cc: sta...@dpdk.org<mailto:sta...@dpdk.org> > > > > Signed-off-by: Laurent Hardy > > <laurent.ha...@6wind.com<mailto:laurent.ha...@6wind.com>> > > Signed-off-by: Olivier Matz > > <olivier.m...@6wind.com<mailto:olivier.m...@6wind.com>> > > Thanks for the fix. > Acked-by: Beilei Xing <beilei.x...@intel.com<mailto:beilei.x...@intel.com>> Applied to dpdk-next-net-intel, thanks! /Helin
