Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shah...@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
---
app/test-pmd/cmdline.c | 69 ------------------------
app/test-pmd/config.c | 7 +--
app/test-pmd/parameters.c | 14 +----
app/test-pmd/testpmd.c | 8 ---
app/test-pmd/testpmd.h | 1 -
doc/guides/testpmd_app_ug/run_app.rst | 12 -----
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 11 ----
7 files changed, 3 insertions(+), 119 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 8584821..b4ef1d0 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -3092,74 +3092,6 @@ struct cmd_set_txsplit_result {
},
};
-/* *** CONFIG TX QUEUE FLAGS *** */
-
-struct cmd_config_txqflags_result {
- cmdline_fixed_string_t port;
- cmdline_fixed_string_t config;
- cmdline_fixed_string_t all;
- cmdline_fixed_string_t what;
- int32_t hexvalue;
-};
-
-static void cmd_config_txqflags_parsed(void *parsed_result,
- __attribute__((unused)) struct cmdline *cl,
- __attribute__((unused)) void *data)
-{
- struct cmd_config_txqflags_result *res = parsed_result;
-
- if (!all_ports_stopped()) {
- printf("Please stop all ports first\n");
- return;
- }
-
- if (strcmp(res->what, "txqflags")) {
- printf("Unknown parameter\n");
- return;
- }
-
- if (res->hexvalue >= 0) {
- txq_flags = res->hexvalue;
- } else {
- printf("txqflags must be >= 0\n");
- return;
- }
-
- init_port_config();
-
- cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
-}
-
-cmdline_parse_token_string_t cmd_config_txqflags_port =
- TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, port,
- "port");
-cmdline_parse_token_string_t cmd_config_txqflags_config =
- TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, config,
- "config");
-cmdline_parse_token_string_t cmd_config_txqflags_all =
- TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, all,
- "all");
-cmdline_parse_token_string_t cmd_config_txqflags_what =
- TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, what,
- "txqflags");
-cmdline_parse_token_num_t cmd_config_txqflags_value =
- TOKEN_NUM_INITIALIZER(struct cmd_config_txqflags_result,
- hexvalue, INT32);
-
-cmdline_parse_inst_t cmd_config_txqflags = {
- .f = cmd_config_txqflags_parsed,
- .data = NULL,
- .help_str = "port config all txqflags <value>",
- .tokens = {
- (void *)&cmd_config_txqflags_port,
- (void *)&cmd_config_txqflags_config,
- (void *)&cmd_config_txqflags_all,
- (void *)&cmd_config_txqflags_what,
- (void *)&cmd_config_txqflags_value,
- NULL,
- },
-};
-
/* *** ADD/REMOVE ALL VLAN IDENTIFIERS TO/FROM A PORT VLAN RX FILTER *** */
struct cmd_rx_vlan_filter_all_result {
cmdline_fixed_string_t rx_vlan;
@@ -15709,7 +15641,6 @@ struct cmd_cmdfile_result {
(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
(cmdline_parse_inst_t *)&cmd_config_rss,
(cmdline_parse_inst_t *)&cmd_config_rxtx_queue,
- (cmdline_parse_inst_t *)&cmd_config_txqflags,
(cmdline_parse_inst_t *)&cmd_config_rss_reta,
(cmdline_parse_inst_t *)&cmd_showport_reta,
(cmdline_parse_inst_t *)&cmd_config_burst,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 57d73aa..41855ab 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -417,7 +417,6 @@ struct rss_type_info {
printf("\nTX writeback threshold: %hhu", qinfo.conf.tx_thresh.wthresh);
printf("\nTX RS threshold: %hu", qinfo.conf.tx_rs_thresh);
printf("\nTX free threshold: %hu", qinfo.conf.tx_free_thresh);
- printf("\nTX flags: %#x", qinfo.conf.txq_flags);
printf("\nTX deferred start: %s",
(qinfo.conf.tx_deferred_start != 0) ? "on" : "off");
printf("\nNumber of TXDs: %hu", qinfo.nb_desc);
@@ -1713,10 +1712,8 @@ struct igb_ring_desc_16_bytes {
tx_conf->tx_thresh.pthresh,
tx_conf->tx_thresh.hthresh,
tx_conf->tx_thresh.wthresh);
- printf(" TX RS bit threshold=%d - TXQ flags=0x%"PRIx32""
- " - TXQ offloads=0x%"PRIx64"\n",
- tx_conf->tx_rs_thresh, tx_conf->txq_flags,
- tx_conf->offloads);
+ printf(" TX RS bit threshold=%d - TXQ offloads=0x%"PRIx64"\n",
+ tx_conf->tx_rs_thresh, tx_conf->offloads);
}
}
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 5888942..fa547df 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -99,7 +99,7 @@
"--rss-ip | --rss-udp | "
"--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
"--txpt= | --txht= | --txwt= | --txfreet= | "
- "--txrst= | --txqflags= | --tx-offloads ]\n",
+ "--txrst= | --tx-offloads ]\n",
progname);
#ifdef RTE_LIBRTE_CMDLINE
printf(" --interactive: run in interactive mode.\n");
@@ -192,8 +192,6 @@
"(0 <= N <= value of txd).\n");
printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N
"
"(0 <= N <= value of txd).\n");
- printf(" --txqflags=0xXXXXXXXX: hexadecimal bitmask of TX queue flags "
- "(0 <= N <= 0x7FFFFFFF).\n");
printf("
--tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
"tx queues statistics counters mapping "
"(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
@@ -632,7 +630,6 @@
{ "txwt", 1, 0, 0 },
{ "txfreet", 1, 0, 0 },
{ "txrst", 1, 0, 0 },
- { "txqflags", 1, 0, 0 },
{ "rxpt", 1, 0, 0 },
{ "rxht", 1, 0, 0 },
{ "rxwt", 1, 0, 0 },
@@ -1006,15 +1003,6 @@
else
rte_exit(EXIT_FAILURE, "txrst must be
>= 0\n");
}
- if (!strcmp(lgopts[opt_idx].name, "txqflags")) {
- char *end = NULL;
- n = strtoul(optarg, &end, 16);
- if (n >= 0)
- txq_flags = (int32_t)n;
- else
- rte_exit(EXIT_FAILURE,
- "txqflags must be >= 0\n");
- }
if (!strcmp(lgopts[opt_idx].name, "rxd")) {
n = atoi(optarg);
if (n > 0) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 8065481..91dcb31 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -259,11 +259,6 @@ struct fwd_engine * fwd_engines[] = {
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
/*
- * Configurable value of TX queue flags.
- */
-int32_t txq_flags = RTE_PMD_PARAM_UNSET;
-
-/*
* Receive Side Scaling (RSS) configuration.
*/
uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */
@@ -2084,9 +2079,6 @@ struct pmd_test_command {
if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
port->tx_conf.tx_free_thresh = tx_free_thresh;
-
- if (txq_flags != RTE_PMD_PARAM_UNSET)
- port->tx_conf.txq_flags = txq_flags;
}
void
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 3e63edf..c9af41c 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -409,7 +409,6 @@ struct queue_stats_mappings {
extern int8_t rx_drop_en;
extern int16_t tx_free_thresh;
extern int16_t tx_rs_thresh;
-extern int32_t txq_flags;
extern uint8_t dcb_config;
extern uint8_t dcb_test;
diff --git a/doc/guides/testpmd_app_ug/run_app.rst
b/doc/guides/testpmd_app_ug/run_app.rst
index fface6f..be9a2cd 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -447,18 +447,6 @@ The commandline options are:
Set the transmit RS bit threshold of TX rings to N, where 0 <= N <= value
of ``--txd``.
The default value is 0.
-* ``--txqflags=0xXXXXXXXX``
-
- Set the hexadecimal bitmask of TX queue flags, where 0 <= N <= 0x7FFFFFFF.
- The default value is 0.
-
- .. note::
-
- When using hardware offload functions such as vlan or checksum
- add ``txqflags=0`` to force the full-featured TX code path.
- In some PMDs this may already be the default.
-
-
* ``--rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping)]``
Set the RX queues statistics counters mapping 0 <= mapping <= 15.
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9789139..8e73519 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -354,8 +354,6 @@ The available information categories are:
also modify the default hierarchy or specify the new hierarchy through CLI
for
implementing QoS scheduler. Requires ``CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y``
``CONFIG_RTE_LIBRTE_SCHED=y``.
-Note: TX timestamping is only available in the "Full Featured" TX path. To
force ``testpmd`` into this mode set ``--txqflags=0``.
-
Example::
testpmd> set fwd rxonly
@@ -1681,15 +1679,6 @@ RX scatter mode is off by default.
The ``on`` option is equivalent to the ``--enable-scatter`` command-line
option.
-port config - TX queue flags
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set a hexadecimal bitmap of TX queue flags for all ports::
-
- testpmd> port config all txqflags value
-
-This command is equivalent to the ``--txqflags`` command-line option.
-
port config - RX Checksum
~~~~~~~~~~~~~~~~~~~~~~~~~
--
1.8.3.1
