Ethdev offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new API.
Signed-off-by: Shahaf Shuler <shah...@mellanox.com>
---
examples/vhost/main.c | 41 ++++++++++++++++++++++++++++++-----------
1 file changed, 30 insertions(+), 11 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 89a61f0..5e0c680 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -145,21 +145,24 @@
.rxmode = {
.mq_mode = ETH_MQ_RX_VMDQ_ONLY,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .ignore_offload_bitfield = 1,
/*
- * It is necessary for 1G NIC such as I350,
+ * VLAN strip is necessary for 1G NIC such as I350,
* this fixes bug of ipv4 forwarding in guest can't
* forward pakets from one virtio dev to another virtio dev.
*/
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .offloads = (DEV_RX_OFFLOAD_CRC_STRIP |
+ DEV_RX_OFFLOAD_VLAN_STRIP),
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
+ .offloads = (DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM |
+ DEV_TX_OFFLOAD_VLAN_INSERT |
+ DEV_TX_OFFLOAD_MULTI_SEGS |
+ DEV_TX_OFFLOAD_TCP_TSO |
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE),
},
.rx_adv_conf = {
/*
@@ -176,6 +179,7 @@
},
};
+
static unsigned lcore_ids[RTE_MAX_LCORE];
static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports = 0; /**< The number of ports specified in command
line */
@@ -288,9 +292,7 @@ struct mbuf_table {
rxconf = &dev_info.default_rxconf;
txconf = &dev_info.default_txconf;
rxconf->rx_drop_en = 1;
-
- /* Enable vlan offload */
- txconf->txq_flags &= ~ETH_TXQ_FLAGS_NOVLANOFFL;
+ txconf->txq_flags = ETH_TXQ_FLAGS_IGNORE;
/*configure the number of supported virtio devices based on VMDQ limits
*/
num_devices = dev_info.max_vmdq_pools;
@@ -332,6 +334,20 @@ struct mbuf_table {
rx_rings = (uint16_t)dev_info.max_rx_queues;
/* Configure ethernet device. */
+ if ((dev_info.rx_offload_capa & port_conf.rxmode.offloads) !=
+ port_conf.rxmode.offloads) {
+ printf("Some Rx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ port, port_conf.rxmode.offloads,
+ dev_info.rx_offload_capa);
+ }
+ if ((dev_info.tx_offload_capa & port_conf.txmode.offloads) !=
+ port_conf.txmode.offloads) {
+ printf("Some Tx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ port, port_conf.txmode.offloads,
+ dev_info.tx_offload_capa);
+ }
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval != 0) {
RTE_LOG(ERR, VHOST_PORT, "Failed to configure port %u: %s.\n",
@@ -353,6 +369,7 @@ struct mbuf_table {
}
/* Setup the queues. */
+ rxconf->offloads = port_conf.rxmode.offloads;
for (q = 0; q < rx_rings; q ++) {
retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
rte_eth_dev_socket_id(port),
@@ -365,6 +382,7 @@ struct mbuf_table {
return retval;
}
}
+ txconf->offloads = port_conf.txmode.offloads;
for (q = 0; q < tx_rings; q ++) {
retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
rte_eth_dev_socket_id(port),
@@ -624,7 +642,8 @@ struct mbuf_table {
} else {
mergeable = !!ret;
if (ret) {
-
vmdq_conf_default.rxmode.jumbo_frame = 1;
+
vmdq_conf_default.rxmode.offloads |=
+
DEV_RX_OFFLOAD_JUMBO_FRAME;
vmdq_conf_default.rxmode.max_rx_pkt_len
= JUMBO_FRAME_MAX_SIZE;
}
--
1.8.3.1
