Hi, I am trying to run dpdk app l3fwd but gives some errors.
I bind my nics using dpdk-dev-bind script. I also set env variables correctly. The nb_ports is 0 when i tried printing that inside "check_port_config" function. Also I used "igb_uio" module but it still shows net_i40e can someone help me please. Thanks pragash@revvit:~/dpdk-stable-17.05.2/examples/l3fwd/build$ ./l3fwd -l 1-19 --no-huge -- -p 0x07 -L --config="(0,0,1),(1,0,2)" --ipv6 --parse-ptype EAL: Detected 20 lcore(s) EAL: Probing VFIO support... EAL: Started without hugepages support, physical addresses not available EAL: PCI device 0000:02:00.0 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: Requested device 0000:02:00.0 cannot be used EAL: PCI device 0000:02:00.1 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: PCI device 0000:04:00.0 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: Requested device 0000:04:00.0 cannot be used EAL: PCI device 0000:04:00.1 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: PCI device 0000:08:00.0 on NUMA socket 0 EAL: probe driver: 8086:1521 net_e1000_igb EAL: PCI device 0000:08:00.1 on NUMA socket 0 EAL: probe driver: 8086:1521 net_e1000_igb L3FWD: Longest-prefix match selected L3FWD: IPV6 is specifiednsoft parse-ptype is enabled port 0 is not present on the board EAL: Error - exiting with code: 1 Cause: check_port_config failed Thanks, Pragash Vijayaragavan Grad Student at Rochester Institute of Technology email : pxv3...@rit.edu ph : 585 764 4662
