Detailed description is added in the coverletter
Signed-off-by: Akhil Goyal <akhil.go...@nxp.com>
---
lib/librte_cryptodev/rte_security.c | 171 +++++++++++++++
lib/librte_cryptodev/rte_security.h | 409 ++++++++++++++++++++++++++++++++++++
2 files changed, 580 insertions(+)
create mode 100644 lib/librte_cryptodev/rte_security.c
create mode 100644 lib/librte_cryptodev/rte_security.h
diff --git a/lib/librte_cryptodev/rte_security.c
b/lib/librte_cryptodev/rte_security.c
new file mode 100644
index 0000000..7c73c93
--- /dev/null
+++ b/lib/librte_cryptodev/rte_security.c
@@ -0,0 +1,171 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of NXP nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_launch.h>
+#include <rte_common.h>
+#include <rte_mempool.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+
+#include "rte_crypto.h"
+#include "rte_cryptodev_pmd.h"
+#include "rte_security.h"
+#include "rte_ethdev.h"
+#include "rte_cryptodev.h"
+
+
+struct rte_security_session *
+rte_security_session_create(struct rte_mempool *mp)
+{
+ struct rte_security_session *sess;
+
+ /* Allocate a session structure from the session pool */
+ if (rte_mempool_get(mp, (void *)&sess)) {
+ CDEV_LOG_ERR("couldn't get object from session mempool");
+ return NULL;
+ }
+
+ /* Clear device session pointer */
+ memset(sess, 0, (sizeof(void *) *
+ RTE_MAX(rte_eth_dev_count(), rte_cryptodev_count())));
+
+ return sess;
+}
+
+int
+rte_security_session_init(uint16_t dev_id,
+ struct rte_security_session *sess,
+ struct rte_security_sess_conf *conf,
+ struct rte_mempool *mp)
+{
+ struct rte_cryptodev *cdev = NULL;
+ struct rte_eth_dev *dev = NULL;
+ uint8_t index;
+ int ret;
+
+ if (sess == NULL || conf == NULL)
+ return -EINVAL;
+
+ switch (conf->action_type) {
+ case RTE_SECURITY_SESS_CRYPTO_PROTO_OFFLOAD:
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id))
+ return -EINVAL;
+ cdev = rte_cryptodev_pmd_get_dev(dev_id);
+ index = cdev->driver_id;
+ if (sess->sess_private_data[index] == NULL) {
+ ret = cdev->sec_ops->session_configure(cdev, conf,
sess, mp);
+ if (ret < 0) {
+ CDEV_LOG_ERR(
+ "cdev_id %d failed to configure session
details",
+ dev_id);
+ return ret;
+ }
+ }
+ break;
+ case RTE_SECURITY_SESS_ETH_INLINE_CRYPTO:
+ case RTE_SECURITY_SESS_ETH_PROTO_OFFLOAD:
+ dev = &rte_eth_devices[dev_id];
+ index = dev->data->port_id;
+ if (sess->sess_private_data[index] == NULL) {
+// ret = dev->sec_ops->session_configure(dev, conf, sess,
mp);
+// if (ret < 0) {
+// CDEV_LOG_ERR(
+// "dev_id %d failed to configure session
details",
+// dev_id);
+// return ret;
+// }
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int
+rte_security_session_free(struct rte_security_session *sess)
+{
+ uint8_t i, nb_drivers = RTE_MAX(rte_eth_dev_count(),
+ rte_cryptodev_count());
+ void *sess_priv;
+ struct rte_mempool *sess_mp;
+
+ if (sess == NULL)
+ return -EINVAL;
+
+ /* Check that all device private data has been freed */
+ for (i = 0; i < nb_drivers; i++) {
+ sess_priv = get_sec_session_private_data(sess, i);
+ if (sess_priv != NULL)
+ return -EBUSY;
+ }
+
+ /* Return session to mempool */
+ sess_mp = rte_mempool_from_obj(sess);
+ rte_mempool_put(sess_mp, sess);
+
+ return 0;
+}
+
+int
+rte_security_session_clear(uint8_t dev_id,
+ enum rte_security_session_action_type action_type,
+ struct rte_security_session *sess)
+{
+ struct rte_cryptodev *cdev = NULL;
+ struct rte_eth_dev *dev = NULL;
+ switch (action_type) {
+ case RTE_SECURITY_SESS_CRYPTO_PROTO_OFFLOAD:
+ cdev = rte_cryptodev_pmd_get_dev(dev_id);
+ if (cdev == NULL || sess == NULL)
+ return -EINVAL;
+ cdev->sec_ops->session_clear(cdev, sess);
+ break;
+ case RTE_SECURITY_SESS_ETH_INLINE_CRYPTO:
+ case RTE_SECURITY_SESS_ETH_PROTO_OFFLOAD:
+ dev = &rte_eth_devices[dev_id];
+ if (dev == NULL || sess == NULL)
+ return -EINVAL;
+// dev->dev_ops->session_clear(dev, sess);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
diff --git a/lib/librte_cryptodev/rte_security.h
b/lib/librte_cryptodev/rte_security.h
new file mode 100644
index 0000000..9747d5e
--- /dev/null
+++ b/lib/librte_cryptodev/rte_security.h
@@ -0,0 +1,409 @@
+#ifndef _RTE_SECURITY_H_
+#define _RTE_SECURITY_H_
+
+/**
+ * @file rte_security.h
+ *
+ * RTE Security Common Definitions
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+
+#include <rte_mbuf.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_common.h>
+#include <rte_crypto.h>
+
+/** IPSec protocol mode */
+enum rte_security_conf_ipsec_sa_mode {
+ RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
+ /**< IPSec Transport mode */
+ RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
+ /**< IPSec Tunnel mode */
+};
+
+/** IPSec Protocol */
+enum rte_security_conf_ipsec_sa_protocol {
+ RTE_SECURITY_IPSEC_SA_PROTO_AH,
+ /**< AH protocol */
+ RTE_SECURITY_IPSEC_SA_PROTO_ESP,
+ /**< ESP protocol */
+};
+
+/** IPSEC tunnel type */
+enum rte_security_ipsec_tunnel_type {
+ RTE_SECURITY_IPSEC_TUNNEL_IPV4 = 0,
+ /**< Outer header is IPv4 */
+ RTE_SECURITY_IPSEC_TUNNEL_IPV6,
+ /**< Outer header is IPv6 */
+};
+
+/**
+ * IPSEC tunnel parameters
+ *
+ * These parameters are used to build outbound tunnel headers.
+ */
+struct rte_security_ipsec_tunnel_param {
+ enum rte_security_ipsec_tunnel_type type;
+ /**< Tunnel type: IPv4 or IPv6 */
+
+ union {
+ struct {
+ struct in_addr src_ip;
+ /**< IPv4 source address */
+ struct in_addr dst_ip;
+ /**< IPv4 destination address */
+ uint8_t dscp;
+ /**< IPv4 Differentiated Services Code Point */
+ uint8_t df;
+ /**< IPv4 Don't Fragment bit */
+ uint8_t ttl;
+ /**< IPv4 Time To Live */
+ } ipv4; /**< IPv4 header parameters */
+
+ struct {
+ struct in6_addr *src_addr;
+ /**< IPv6 source address */
+ struct in6_addr *dst_addr;
+ /**< IPv6 destination address */
+ uint8_t dscp;
+ /**< IPv6 Differentiated Services Code Point */
+ uint32_t flabel;
+ /**< IPv6 flow label */
+ uint8_t hlimit;
+ /**< IPv6 hop limit */
+ } ipv6; /**< IPv6 header parameters */
+ }; /**< Various tunnel parameters */
+};
+
+/**
+ * IPSEC SA option flags
+ */
+struct rte_security_ipsec_sa_options {
+ /** Extended Sequence Numbers (ESN)
+ *
+ * * 1: Use extended (64 bit) sequence numbers
+ * * 0: Use normal sequence numbers
+ */
+ uint32_t esn : 1;
+
+ /** UDP encapsulation
+ *
+ * * 1: Do UDP encapsulation/decapsulation so that IPSEC packets can
+ * traverse through NAT boxes.
+ * * 0: No UDP encapsulation
+ */
+ uint32_t udp_encap : 1;
+
+ /** Copy DSCP bits
+ *
+ * * 1: Copy IPv4 or IPv6 DSCP bits from inner IP header to
+ * the outer IP header in encapsulation, and vice versa in
+ * decapsulation.
+ * * 0: Use values from odp_ipsec_tunnel_param_t in encapsulation and
+ * do not change DSCP field in decapsulation.
+ */
+ uint32_t copy_dscp : 1;
+
+ /** Copy IPv6 Flow Label
+ *
+ * * 1: Copy IPv6 flow label from inner IPv6 header to the
+ * outer IPv6 header.
+ * * 0: Use value from odp_ipsec_tunnel_param_t
+ */
+ uint32_t copy_flabel : 1;
+
+ /** Copy IPv4 Don't Fragment bit
+ *
+ * * 1: Copy the DF bit from the inner IPv4 header to the outer
+ * IPv4 header.
+ * * 0: Use value from odp_ipsec_tunnel_param_t
+ */
+ uint32_t copy_df : 1;
+
+ /** Decrement inner packet Time To Live (TTL) field
+ *
+ * * 1: In tunnel mode, decrement inner packet IPv4 TTL or
+ * IPv6 Hop Limit after tunnel decapsulation, or before tunnel
+ * encapsulation.
+ * * 0: Inner packet is not modified.
+ */
+ uint32_t dec_ttl : 1;
+
+};
+
+/** IPSec Operations */
+enum rte_security_ipsec_operation {
+ RTE_SECURITY_IPSEC_OP_ENCAP,
+ /**< Encrypt and generate digest */
+ RTE_SECURITY_IPSEC_OP_DECAP,
+ /**< Verify digest and decrypt */
+};
+
+/**
+ * IPSec Setup Data.
+ *
+ * This structure contains data relating to IPSec
+ * used to create a session.
+ */
+struct rte_security_ipsec_xform {
+ enum rte_security_ipsec_operation op;
+ /**< IPSec operation - Encap or Decap */
+ unsigned int spi;
+ /**< SA security parameter index */
+ enum rte_crypto_cipher_algorithm cipher_alg;
+ /**< Cipher Algorithm */
+ struct {
+ uint8_t *data; /**< pointer to key data */
+ size_t length; /**< key length in bytes */
+ } cipher_key;
+ enum rte_crypto_auth_algorithm auth_alg;
+ /**< Authentication Algorithm */
+ struct {
+ uint8_t *data; /**< pointer to key data */
+ size_t length; /**< key length in bytes */
+ } auth_key;
+ uint32_t salt; /**< salt for this SA */
+ enum rte_security_conf_ipsec_sa_mode mode;
+ /**< IPsec SA Mode - transport/tunnel */
+ enum rte_security_conf_ipsec_sa_protocol proto;
+ /**< IPsec SA Protocol - AH/ESP */
+ struct rte_security_ipsec_tunnel_param tunnel;
+ /**< Tunnel parameters, NULL for transport mode */
+ struct rte_security_ipsec_sa_options options;
+ /**< various SA options */
+};
+
+/** IPsec Security Session Configuration */
+struct rte_security_dtls_xform {
+ /** To be Filled */
+};
+
+/** IPsec Security Session Configuration */
+struct rte_security_macsec_xform {
+ /** To be Filled */
+};
+
+/**< Security Session action type */
+enum rte_security_session_action_type {
+ RTE_SECURITY_SESS_NONE,
+ /**< Non protocol offload. Application need to manage everything */
+ RTE_SECURITY_SESS_ETH_INLINE_CRYPTO,
+ /**< Crypto operations are performed by Network interface */
+ RTE_SECURITY_SESS_ETH_PROTO_OFFLOAD,
+ /**< Crypto operations with protocol support are performed
+ * by Network/ethernet device.
+ */
+ RTE_SECURITY_SESS_CRYPTO_PROTO_OFFLOAD,
+ /**< Crypto operations with protocol support are performed
+ * by Crypto device.
+ */
+};
+
+/** Security Session Protocols */
+enum rte_security_sess_protocol {
+ RTE_SEC_CONF_DTLS,
+ /**< DTLS Protocol */
+ RTE_SEC_CONF_IPSEC,
+ /**< IPSec Protocol */
+ RTE_SEC_CONF_MACSEC,
+ /**< MACSec Protocol */
+};
+
+/**
+ * Security Session Configuration
+ */
+struct rte_security_sess_conf {
+ enum rte_security_session_action_type action_type;
+ /**< Type of action to be performed on the session */
+ enum rte_security_sess_protocol protocol;
+ /**< Security protocol to be configured */
+
+ union {
+ struct rte_security_ipsec_xform *ipsec_xform;
+ struct rte_security_dtls_xform *dtls_xform;
+ struct rte_security_macsec_xform *macsec_xform;
+ };
+ /**< Configuration parameters for security session */
+};
+
+struct rte_security_session {
+ __extension__ void *sess_private_data[0];
+ /**< Private session material */
+};
+
+/**
+ * Create Security session header (generic with no private data)
+ *
+ * @param mempool Session mempool to allocate session objects from
+ * @return
+ * - On success, pointer to session
+ * - On failure, NULL
+ */
+struct rte_security_session *
+rte_security_session_create(struct rte_mempool *mempool);
+
+/**
+ * Fill out private data for the device, based on its device id and name.
+ *
+ * @param dev_id Device id that we want the session to be used on
+ * @param dev_name Device name for which session is to be used
+ * @param sess Session where the private data will be attached to
+ * @param conf Security config to apply on flow
+ * processed with this session
+ * @param mempool Mempool where the private data is allocated.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int
+rte_security_session_init(uint16_t dev_id,
+ struct rte_security_session *sess,
+ struct rte_security_sess_conf *conf,
+ struct rte_mempool *mempool);
+
+/**
+ * Frees Security session header, after checking that all
+ * the device private data has been freed, returning it
+ * to its original mempool.
+ *
+ * @param sess Session header to be freed.
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if session is NULL.
+ * - -EBUSY if not all device private data has been freed.
+ */
+int
+rte_security_session_free(struct rte_security_session *sess);
+
+/**
+ * Frees private data for the device id, based on its device name,
+ * returning it to its mempool.
+ *
+ * @param dev_id ID of device that uses the session.
+ * @param action_type Action type for Security operation.
+ * @param sess Session containing the reference to the private data
+ *
+ * @return
+ * - 0 if successful.
+ * - -EINVAL if device is invalid or session is NULL.
+ */
+int
+rte_security_session_clear(uint8_t dev_id,
+ enum rte_security_session_action_type action_type,
+ struct rte_security_session *sess);
+
+/**
+ * Attach a session to a symmetric crypto operation
+ *
+ * @param sym_op crypto operation
+ * @param sess security session
+ */
+static inline int
+__rte_security_attach_session(struct rte_crypto_sym_op *sym_op,
+ struct rte_security_session *sess)
+{
+ sym_op->sec_session = sess;
+
+ return 0;
+}
+
+static inline void *
+get_sec_session_private_data(const struct rte_security_session *sess,
+ uint8_t driver_id) {
+ return sess->sess_private_data[driver_id];
+}
+
+static inline void
+set_sec_session_private_data(struct rte_security_session *sess,
+ uint8_t driver_id, void *private_data)
+{
+ sess->sess_private_data[driver_id] = private_data;
+}
+
+/**
+ * Attach a session to a crypto operation.
+ * This API is needed only in case of RTE_SECURITY_SESS_CRYPTO_PROTO_OFFLOAD
+ * For other rte_security_session_action_type, ol_flags in rte_mbuf may be
+ * defined to perform security operations.
+ *
+ * @param op crypto operation
+ * @param sess security session
+ */
+static inline int
+rte_security_attach_session(struct rte_crypto_op *op,
+ struct rte_security_session *sess)
+{
+ if (unlikely(op->type != RTE_CRYPTO_OP_TYPE_SYMMETRIC))
+ return -1;
+
+ op->sess_type = RTE_CRYPTO_OP_WITH_SESSION;
+
+ return __rte_security_attach_session(op->sym, sess);
+}
+
+/**
+ * Security Capability
+ */
+struct rte_security_capabilities {
+ enum rte_security_sess_protocol protocol;
+ RTE_STD_C11
+ union {
+ struct {
+ enum rte_crypto_auth_algorithm a_algo;
+ /**< authentication algorithm */
+ enum rte_crypto_cipher_algorithm c_algo;
+ /**< cipher algorithm */
+ uint16_t block_size;
+ /**< algorithm block size */
+ struct rte_crypto_param_range c_key_size;
+ /**< cipher key size range */
+ struct rte_crypto_param_range a_key_size;
+ /**< auth key size range */
+ struct rte_crypto_param_range digest_size;
+ /**< digest size range */
+ struct rte_crypto_param_range iv_size;
+ /**< Initialisation vector data size range */
+ } ipsec;
+ /**< IPSEC transform capabilities */
+ struct {
+ /* To be Filled */
+ } dtls;
+ /**< DTLS transform capabilities */
+ struct {
+ /* To be Filled */
+ } macsec;
+ /**< MACSEC transform capabilities */
+ };
+};
+
+/**
+ * Provide capabilities available for defined device and algorithm
+ *
+ * @param dev_id The identifier of the device.
+ * @param dev_name Device name for which capability is needed
+ * @param protocol Protocol for which capability is required
+ *
+ * @return
+ * - Return description of the security capability if exist.
+ * - Return NULL if the capability not exist.
+ */
+const struct rte_security_capabilities *
+rte_security_capability_get(uint8_t dev_id, char *dev_name,
+ enum rte_security_sess_protocol protocol);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_SECURITY_H_ */
--
2.9.3
