Moved all bypass functions to ixgbe pmd and removed function
pointers from the eth_dev_ops struct.
Also cleared some checkpatch errors.
Signed-off-by: Radu Nicolau <radu.nico...@intel.com>
---
app/test-pmd/cmdline.c | 100 ++++++------
app/test-pmd/testpmd.c | 11 +-
app/test-pmd/testpmd.h | 2 +-
doc/guides/rel_notes/deprecation.rst | 23 ---
drivers/net/ixgbe/ixgbe_bypass.c | 5 +-
drivers/net/ixgbe/ixgbe_ethdev.c | 11 --
drivers/net/ixgbe/rte_pmd_ixgbe.c | 107 +++++++++++++
drivers/net/ixgbe/rte_pmd_ixgbe.h | 215 ++++++++++++++++++++++++++
drivers/net/ixgbe/rte_pmd_ixgbe_version.map | 14 ++
lib/librte_ether/rte_ethdev.c | 122 ---------------
lib/librte_ether/rte_ethdev.h | 230 ----------------------------
lib/librte_ether/rte_ether_version.map | 9 --
12 files changed, 398 insertions(+), 451 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0afac68..66f9e63 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -523,7 +523,7 @@ static void cmd_help_long_parsed(void *parsed_result,
" Flush (default) or don't flush RX streams before"
" forwarding. Mainly used with PCAP drivers.\n\n"
- #ifdef RTE_NIC_BYPASS
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
"set bypass mode (normal|bypass|isolate) (port_id)\n"
" Set the bypass mode for the lowest port on bypass
enabled"
" NIC.\n\n"
@@ -3904,7 +3904,7 @@ cmdline_parse_inst_t cmd_set_link_check = {
},
};
-#ifdef RTE_NIC_BYPASS
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
/* *** SET NIC BYPASS MODE *** */
struct cmd_set_bypass_mode_result {
cmdline_fixed_string_t set;
@@ -3921,19 +3921,18 @@ cmd_set_bypass_mode_parsed(void *parsed_result,
{
struct cmd_set_bypass_mode_result *res = parsed_result;
portid_t port_id = res->port_id;
- uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
+ uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
if (!strcmp(res->value, "bypass"))
- bypass_mode = RTE_BYPASS_MODE_BYPASS;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS;
else if (!strcmp(res->value, "isolate"))
- bypass_mode = RTE_BYPASS_MODE_ISOLATE;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE;
else
- bypass_mode = RTE_BYPASS_MODE_NORMAL;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
/* Set the bypass mode for the relevant port. */
- if (0 != rte_eth_dev_bypass_state_set(port_id, &bypass_mode)) {
+ if (rte_pmd_ixgbe_bypass_state_set(port_id, &bypass_mode) != 0)
printf("\t Failed to set bypass mode for port = %d.\n",
port_id);
- }
}
cmdline_parse_token_string_t cmd_setbypass_mode_set =
@@ -3986,46 +3985,49 @@ cmd_set_bypass_event_parsed(void *parsed_result,
int32_t rc;
struct cmd_set_bypass_event_result *res = parsed_result;
portid_t port_id = res->port_id;
- uint32_t bypass_event = RTE_BYPASS_EVENT_NONE;
- uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
+ uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE;
+ uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
if (!strcmp(res->event_value, "timeout"))
- bypass_event = RTE_BYPASS_EVENT_TIMEOUT;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT;
else if (!strcmp(res->event_value, "os_on"))
- bypass_event = RTE_BYPASS_EVENT_OS_ON;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON;
else if (!strcmp(res->event_value, "os_off"))
- bypass_event = RTE_BYPASS_EVENT_OS_OFF;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF;
else if (!strcmp(res->event_value, "power_on"))
- bypass_event = RTE_BYPASS_EVENT_POWER_ON;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON;
else if (!strcmp(res->event_value, "power_off"))
- bypass_event = RTE_BYPASS_EVENT_POWER_OFF;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF;
else
- bypass_event = RTE_BYPASS_EVENT_NONE;
+ bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE;
if (!strcmp(res->mode_value, "bypass"))
- bypass_mode = RTE_BYPASS_MODE_BYPASS;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS;
else if (!strcmp(res->mode_value, "isolate"))
- bypass_mode = RTE_BYPASS_MODE_ISOLATE;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE;
else
- bypass_mode = RTE_BYPASS_MODE_NORMAL;
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
/* Set the watchdog timeout. */
- if (bypass_event == RTE_BYPASS_EVENT_TIMEOUT) {
+ if (bypass_event == RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT) {
rc = -EINVAL;
- if (!RTE_BYPASS_TMT_VALID(bypass_timeout) ||
- (rc = rte_eth_dev_wd_timeout_store(port_id,
- bypass_timeout)) != 0) {
+ if (RTE_PMD_IXGBE_BYPASS_TMT_VALID(bypass_timeout)) {
+ rc = rte_pmd_ixgbe_bypass_wd_timeout_store(port_id,
+ bypass_timeout);
+ }
+ if (rc != 0) {
printf("Failed to set timeout value %u "
- "for port %d, errto code: %d.\n",
- bypass_timeout, port_id, rc);
+ "for port %d, errto code: %d.\n",
+ bypass_timeout, port_id, rc);
}
}
/* Set the bypass event to transition to bypass mode. */
- if (0 != rte_eth_dev_bypass_event_store(port_id,
- bypass_event, bypass_mode)) {
- printf("\t Failed to set bypass event for port = %d.\n",
port_id);
+ if (rte_pmd_ixgbe_bypass_event_store(port_id, bypass_event,
+ bypass_mode) != 0) {
+ printf("\t Failed to set bypass event for port = %d.\n",
+ port_id);
}
}
@@ -4087,21 +4089,21 @@ cmd_set_bypass_timeout_parsed(void *parsed_result,
struct cmd_set_bypass_timeout_result *res = parsed_result;
if (!strcmp(res->value, "1.5"))
- bypass_timeout = RTE_BYPASS_TMT_1_5_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC;
else if (!strcmp(res->value, "2"))
- bypass_timeout = RTE_BYPASS_TMT_2_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_2_SEC;
else if (!strcmp(res->value, "3"))
- bypass_timeout = RTE_BYPASS_TMT_3_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_3_SEC;
else if (!strcmp(res->value, "4"))
- bypass_timeout = RTE_BYPASS_TMT_4_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_4_SEC;
else if (!strcmp(res->value, "8"))
- bypass_timeout = RTE_BYPASS_TMT_8_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_8_SEC;
else if (!strcmp(res->value, "16"))
- bypass_timeout = RTE_BYPASS_TMT_16_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_16_SEC;
else if (!strcmp(res->value, "32"))
- bypass_timeout = RTE_BYPASS_TMT_32_SEC;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_32_SEC;
else
- bypass_timeout = RTE_BYPASS_TMT_OFF;
+ bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
}
cmdline_parse_token_string_t cmd_setbypass_timeout_set =
@@ -4151,11 +4153,11 @@ cmd_show_bypass_config_parsed(void *parsed_result,
uint32_t timeout = bypass_timeout;
int i;
- static const char * const timeouts[RTE_BYPASS_TMT_NUM] =
+ static const char * const timeouts[RTE_PMD_IXGBE_BYPASS_TMT_NUM] =
{"off", "1.5", "2", "3", "4", "8", "16", "32"};
- static const char * const modes[RTE_BYPASS_MODE_NUM] =
+ static const char * const modes[RTE_PMD_IXGBE_BYPASS_MODE_NUM] =
{"UNKNOWN", "normal", "bypass", "isolate"};
- static const char * const events[RTE_BYPASS_EVENT_NUM] = {
+ static const char * const events[RTE_PMD_IXGBE_BYPASS_EVENT_NUM] = {
"NONE",
"OS/board on",
"power supply on",
@@ -4165,32 +4167,32 @@ cmd_show_bypass_config_parsed(void *parsed_result,
int num_events = (sizeof events) / (sizeof events[0]);
/* Display the bypass mode.*/
- if (0 != rte_eth_dev_bypass_state_show(port_id, &bypass_mode)) {
+ if (rte_pmd_ixgbe_bypass_state_show(port_id, &bypass_mode) != 0) {
printf("\tFailed to get bypass mode for port = %d\n", port_id);
return;
}
else {
- if (!RTE_BYPASS_MODE_VALID(bypass_mode))
- bypass_mode = RTE_BYPASS_MODE_NONE;
+ if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(bypass_mode))
+ bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE;
printf("\tbypass mode = %s\n", modes[bypass_mode]);
}
/* Display the bypass timeout.*/
- if (!RTE_BYPASS_TMT_VALID(timeout))
- timeout = RTE_BYPASS_TMT_OFF;
+ if (!RTE_PMD_IXGBE_BYPASS_TMT_VALID(timeout))
+ timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
printf("\tbypass timeout = %s\n", timeouts[timeout]);
/* Display the bypass events and associated modes. */
- for (i = RTE_BYPASS_EVENT_START; i < num_events; i++) {
+ for (i = RTE_PMD_IXGBE_BYPASS_EVENT_START; i < num_events; i++) {
- if (0 != rte_eth_dev_bypass_event_show(port_id, i,
&event_mode)) {
+ if (rte_pmd_ixgbe_bypass_event_show(port_id, i, &event_mode)) {
printf("\tFailed to get bypass mode for event = %s\n",
events[i]);
} else {
- if (!RTE_BYPASS_MODE_VALID(event_mode))
- event_mode = RTE_BYPASS_MODE_NONE;
+ if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(event_mode))
+ event_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE;
printf("\tbypass event: %-16s = %s\n", events[i],
modes[event_mode]);
@@ -13597,7 +13599,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_set_allmulti_mode_all,
(cmdline_parse_inst_t *)&cmd_set_flush_rx,
(cmdline_parse_inst_t *)&cmd_set_link_check,
-#ifdef RTE_NIC_BYPASS
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
(cmdline_parse_inst_t *)&cmd_set_bypass_mode,
(cmdline_parse_inst_t *)&cmd_set_bypass_event,
(cmdline_parse_inst_t *)&cmd_set_bypass_timeout,
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index d1041af..ecd1f31 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -73,6 +73,9 @@
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
+#endif
#ifdef RTE_LIBRTE_PMD_XENVIRT
#include <rte_eth_xenvirt.h>
#endif
@@ -295,10 +298,10 @@ uint32_t event_print_mask = (UINT32_C(1) <<
RTE_ETH_EVENT_UNKNOWN) |
/*
* NIC bypass mode configuration options.
*/
-#ifdef RTE_NIC_BYPASS
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
/* The NIC bypass watchdog timeout. */
-uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
+uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
@@ -2012,8 +2015,8 @@ init_port_config(void)
rte_eth_macaddr_get(pid, &port->eth_addr);
map_port_queue_stats_mapping_registers(pid, port);
-#ifdef RTE_NIC_BYPASS
- rte_eth_dev_bypass_init(pid);
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
+ rte_pmd_ixgbe_bypass_init(pid);
#endif
if (lsc_interrupt &&
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index e6c43ba..5c69756 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -311,7 +311,7 @@ extern uint8_t rmv_interrupt; /**< disabled by
"--no-rmv-interrupt" parameter */
extern uint32_t event_print_mask;
/**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
-#ifdef RTE_NIC_BYPASS
+#if defined(RTE_NIC_BYPASS) && defined(RTE_LIBRTE_IXGBE_PMD)
extern uint32_t bypass_timeout; /**< Store the NIC bypass watchdog timeout */
#endif
diff --git a/doc/guides/rel_notes/deprecation.rst
b/doc/guides/rel_notes/deprecation.rst
index ba9b5a2..1786a59 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -38,29 +38,6 @@ Deprecation Notices
``_rte_eth_dev_callback_process``. In 17.08 the function will return an
``int``
instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
-* ethdev: for 17.08 it is planned to deprecate the following nine rte_eth_dev_*
- functions and move them into the ixgbe PMD:
-
- ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``,
- ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``,
- ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``,
- ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``,
- ``rte_eth_dev_bypass_wd_reset``.
-
- The following fields will be removed from ``struct eth_dev_ops``:
-
- ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``,
- ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``,
- ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``.
-
- The functions will be renamed to the following, and moved to the ``ixgbe``
PMD:
-
- ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``,
- ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``,
- ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``,
- ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``,
- ``rte_pmd_ixgbe_bypass_wd_reset``.
-
* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
are respectively replaced by PKT_RX_VLAN_STRIPPED and
PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
diff --git a/drivers/net/ixgbe/ixgbe_bypass.c b/drivers/net/ixgbe/ixgbe_bypass.c
index 7006928..38a4493 100644
--- a/drivers/net/ixgbe/ixgbe_bypass.c
+++ b/drivers/net/ixgbe/ixgbe_bypass.c
@@ -36,6 +36,7 @@
#include <rte_ethdev.h>
#include "ixgbe_ethdev.h"
#include "ixgbe_bypass_api.h"
+#include "rte_pmd_ixgbe.h"
#define BYPASS_STATUS_OFF_MASK 3
@@ -284,7 +285,7 @@ ixgbe_bypass_wd_timeout_store(struct rte_eth_dev *dev, u32
timeout)
FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP);
/* disable the timer with timeout of zero */
- if (timeout == RTE_BYPASS_TMT_OFF) {
+ if (timeout == RTE_PMD_IXGBE_BYPASS_TMT_OFF) {
status = 0x0; /* WDG enable off */
mask = BYPASS_WDT_ENABLE_M;
} else {
@@ -355,7 +356,7 @@ ixgbe_bypass_wd_timeout_show(struct rte_eth_dev *dev, u32
*wd_timeout)
wdg = by_ctl & BYPASS_WDT_ENABLE_M;
if (!wdg)
- *wd_timeout = RTE_BYPASS_TMT_OFF;
+ *wd_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
else
*wd_timeout = (by_ctl >> BYPASS_WDT_TIME_SHIFT) &
BYPASS_WDT_MASK;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 2083cde..7ad969f 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -575,17 +575,6 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = {
.set_queue_rate_limit = ixgbe_set_queue_rate_limit,
.reta_update = ixgbe_dev_rss_reta_update,
.reta_query = ixgbe_dev_rss_reta_query,
-#ifdef RTE_NIC_BYPASS
- .bypass_init = ixgbe_bypass_init,
- .bypass_state_set = ixgbe_bypass_state_store,
- .bypass_state_show = ixgbe_bypass_state_show,
- .bypass_event_set = ixgbe_bypass_event_store,
- .bypass_event_show = ixgbe_bypass_event_show,
- .bypass_wd_timeout_set = ixgbe_bypass_wd_timeout_store,
- .bypass_wd_timeout_show = ixgbe_bypass_wd_timeout_show,
- .bypass_ver_show = ixgbe_bypass_ver_show,
- .bypass_wd_reset = ixgbe_bypass_wd_reset,
-#endif /* RTE_NIC_BYPASS */
.rss_hash_update = ixgbe_dev_rss_hash_update,
.rss_hash_conf_get = ixgbe_dev_rss_hash_conf_get,
.filter_ctrl = ixgbe_dev_filter_ctrl,
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c
b/drivers/net/ixgbe/rte_pmd_ixgbe.c
index e8fc9a6..2b44a33 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
@@ -908,3 +908,110 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
return 0;
}
+
+#ifdef RTE_NIC_BYPASS
+int
+rte_pmd_ixgbe_bypass_init(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ ixgbe_bypass_init(dev);
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_bypass_state_show(uint8_t port_id, uint32_t *state)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_state_show(dev, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_state_set(uint8_t port_id, uint32_t *new_state)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_state_store(dev, new_state);
+}
+
+int
+rte_pmd_ixgbe_bypass_event_show(uint8_t port_id,
+ uint32_t event,
+ uint32_t *state)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_event_show(dev, event, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_event_store(uint8_t port_id,
+ uint32_t event,
+ uint32_t state)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_event_store(dev, event, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port_id, uint32_t timeout)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_wd_timeout_store(dev, timeout);
+}
+
+int
+rte_pmd_ixgbe_bypass_ver_show(uint8_t port_id, uint32_t *ver)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_ver_show(dev, ver);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_wd_timeout_show(dev, wd_timeout);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_reset(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+ return ixgbe_bypass_wd_reset(dev);
+}
+#endif
+
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h
b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 1f2b1bd..d33c285 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -427,6 +427,177 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
uint8_t tc_num,
uint8_t *bw_weight);
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_init(uint8_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param state
+ * The return bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param new_state
+ * The current bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The bypass state when given event occurred.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
+ uint32_t event,
+ uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The assigned state when given event occurs.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
+ uint32_t event,
+ uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param timeout
+ * The timeout to be set.
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param ver
+ * The firmware version
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param wd_timeout
+ * The return watchdog timeout. "0" represents timer expired
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port);
+
+
/**
* Response sent back to ixgbe driver from user app after callback
*/
@@ -446,4 +617,48 @@ struct rte_pmd_ixgbe_mb_event_param {
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
};
+enum {
+ RTE_PMD_IXGBE_BYPASS_MODE_NONE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
+ RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
+ RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
+ RTE_PMD_IXGBE_BYPASS_MODE_NUM,
+};
+
+#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
+ RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
+ RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
+ RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
+ RTE_PMD_IXGBE_BYPASS_EVENT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \
+ ((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
+ (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */
+ RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
+ RTE_PMD_IXGBE_BYPASS_TMT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \
+ ((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
+ ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
+ (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+
#endif /* _PMD_IXGBE_H_ */
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
index 45a57e3..bf77674 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
@@ -38,3 +38,17 @@ DPDK_17.05 {
rte_pmd_ixgbe_ping_vf;
rte_pmd_ixgbe_set_tc_bw_alloc;
} DPDK_17.02;
+
+DPDK_17.08 {
+ global:
+
+ rte_pmd_ixgbe_bypass_event_show;
+ rte_pmd_ixgbe_bypass_event_store;
+ rte_pmd_ixgbe_bypass_init;
+ rte_pmd_ixgbe_bypass_state_set;
+ rte_pmd_ixgbe_bypass_state_show;
+ rte_pmd_ixgbe_bypass_ver_show;
+ rte_pmd_ixgbe_bypass_wd_reset;
+ rte_pmd_ixgbe_bypass_wd_timeout_show;
+ rte_pmd_ixgbe_bypass_wd_timeout_store;
+} DPDK_17.05;
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 83898a8..d257406 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2872,128 +2872,6 @@ rte_eth_dev_rx_intr_disable(uint8_t port_id,
return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
}
-#ifdef RTE_NIC_BYPASS
-int rte_eth_dev_bypass_init(uint8_t port_id)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_init, -ENOTSUP);
- (*dev->dev_ops->bypass_init)(dev);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_state_show(uint8_t port_id, uint32_t *state)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
- (*dev->dev_ops->bypass_state_show)(dev, state);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_state_set(uint8_t port_id, uint32_t *new_state)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_set, -ENOTSUP);
- (*dev->dev_ops->bypass_state_set)(dev, new_state);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_event_show(uint8_t port_id, uint32_t event, uint32_t *state)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
- (*dev->dev_ops->bypass_event_show)(dev, event, state);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_event_store(uint8_t port_id, uint32_t event, uint32_t state)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_event_set, -ENOTSUP);
- (*dev->dev_ops->bypass_event_set)(dev, event, state);
- return 0;
-}
-
-int
-rte_eth_dev_wd_timeout_store(uint8_t port_id, uint32_t timeout)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_set, -ENOTSUP);
- (*dev->dev_ops->bypass_wd_timeout_set)(dev, timeout);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_ver_show(uint8_t port_id, uint32_t *ver)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_ver_show, -ENOTSUP);
- (*dev->dev_ops->bypass_ver_show)(dev, ver);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_show,
-ENOTSUP);
- (*dev->dev_ops->bypass_wd_timeout_show)(dev, wd_timeout);
- return 0;
-}
-
-int
-rte_eth_dev_bypass_wd_reset(uint8_t port_id)
-{
- struct rte_eth_dev *dev;
-
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
- dev = &rte_eth_devices[port_id];
-
- RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_reset, -ENOTSUP);
- (*dev->dev_ops->bypass_wd_reset)(dev);
- return 0;
-}
-#endif
int
rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 0f38b45..9c79c36 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1381,59 +1381,6 @@ typedef int (*eth_l2_tunnel_offload_set_t)
uint8_t en);
/**< @internal enable/disable the l2 tunnel offload functions */
-#ifdef RTE_NIC_BYPASS
-
-enum {
- RTE_BYPASS_MODE_NONE,
- RTE_BYPASS_MODE_NORMAL,
- RTE_BYPASS_MODE_BYPASS,
- RTE_BYPASS_MODE_ISOLATE,
- RTE_BYPASS_MODE_NUM,
-};
-
-#define RTE_BYPASS_MODE_VALID(x) \
- ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
- RTE_BYPASS_EVENT_NONE,
- RTE_BYPASS_EVENT_START,
- RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
- RTE_BYPASS_EVENT_POWER_ON,
- RTE_BYPASS_EVENT_OS_OFF,
- RTE_BYPASS_EVENT_POWER_OFF,
- RTE_BYPASS_EVENT_TIMEOUT,
- RTE_BYPASS_EVENT_NUM
-};
-
-#define RTE_BYPASS_EVENT_VALID(x) \
- ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
- RTE_BYPASS_TMT_OFF, /* timeout disabled. */
- RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
- RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
- RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
- RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
- RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
- RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
- RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
- RTE_BYPASS_TMT_NUM
-};
-
-#define RTE_BYPASS_TMT_VALID(x) \
- ((x) == RTE_BYPASS_TMT_OFF || \
- ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
-
-typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
-typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t
*new_state);
-typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t
*state);
-typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state,
uint32_t event);
-typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t
event_shift, uint32_t *event);
-typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t
timeout);
-typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t
*wd_timeout);
-typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
-typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
-#endif
typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
@@ -1540,18 +1487,6 @@ struct eth_dev_ops {
eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */
eth_set_eeprom_t set_eeprom; /**< Set eeprom. */
- /* bypass control */
-#ifdef RTE_NIC_BYPASS
- bypass_init_t bypass_init;
- bypass_state_set_t bypass_state_set;
- bypass_state_show_t bypass_state_show;
- bypass_event_set_t bypass_event_set;
- bypass_event_show_t bypass_event_show;
- bypass_wd_timeout_set_t bypass_wd_timeout_set;
- bypass_wd_timeout_show_t bypass_wd_timeout_show;
- bypass_ver_show_t bypass_ver_show;
- bypass_wd_reset_t bypass_wd_reset;
-#endif
eth_filter_ctrl_t filter_ctrl; /**< common filter control. */
@@ -3827,171 +3762,6 @@ int rte_eth_mirror_rule_reset(uint8_t port_id,
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
-/**
- * Initialize bypass logic. This function needs to be called before
- * executing any other bypass API.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_init(uint8_t port);
-
-/**
- * Return bypass state.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param state
- * The return bypass state.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
-
-/**
- * Set bypass state
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param new_state
- * The current bypass state.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
-
-/**
- * Return bypass state when given event occurs.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param event
- * The bypass event
- * - (1) Main power on (power button is pushed)
- * - (2) Auxiliary power on (power supply is being plugged)
- * - (3) Main power off (system shutdown and power supply is left plugged in)
- * - (4) Auxiliary power off (power supply is being unplugged)
- * - (5) Display or set the watchdog timer
- * @param state
- * The bypass state when given event occurred.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t
*state);
-
-/**
- * Set bypass state when given event occurs.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param event
- * The bypass event
- * - (1) Main power on (power button is pushed)
- * - (2) Auxiliary power on (power supply is being plugged)
- * - (3) Main power off (system shutdown and power supply is left plugged in)
- * - (4) Auxiliary power off (power supply is being unplugged)
- * - (5) Display or set the watchdog timer
- * @param state
- * The assigned state when given event occurs.
- * - (1) Normal mode
- * - (2) Bypass mode
- * - (3) Isolate mode
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t
state);
-
-/**
- * Set bypass watchdog timeout count.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param timeout
- * The timeout to be set.
- * - (0) 0 seconds (timer is off)
- * - (1) 1.5 seconds
- * - (2) 2 seconds
- * - (3) 3 seconds
- * - (4) 4 seconds
- * - (5) 8 seconds
- * - (6) 16 seconds
- * - (7) 32 seconds
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
-
-/**
- * Get bypass firmware version.
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param ver
- * The firmware version
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
-
-/**
- * Return bypass watchdog timeout in seconds
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @param wd_timeout
- * The return watchdog timeout. "0" represents timer expired
- * - (0) 0 seconds (timer is off)
- * - (1) 1.5 seconds
- * - (2) 2 seconds
- * - (3) 3 seconds
- * - (4) 4 seconds
- * - (5) 8 seconds
- * - (6) 16 seconds
- * - (7) 32 seconds
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
-
-/**
- * Reset bypass watchdog timer
- *
- * @param port
- * The port identifier of the Ethernet device.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_reset(uint8_t port);
-
/**
* Configuration of Receive Side Scaling hash computation of Ethernet device.
*
diff --git a/lib/librte_ether/rte_ether_version.map
b/lib/librte_ether/rte_ether_version.map
index d6726bb..1d22434 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -10,14 +10,6 @@ DPDK_2.2 {
rte_eth_dev_allocate;
rte_eth_dev_allocated;
rte_eth_dev_attach;
- rte_eth_dev_bypass_event_show;
- rte_eth_dev_bypass_event_store;
- rte_eth_dev_bypass_init;
- rte_eth_dev_bypass_state_set;
- rte_eth_dev_bypass_state_show;
- rte_eth_dev_bypass_ver_show;
- rte_eth_dev_bypass_wd_reset;
- rte_eth_dev_bypass_wd_timeout_show;
rte_eth_dev_callback_register;
rte_eth_dev_callback_unregister;
rte_eth_dev_close;
@@ -70,7 +62,6 @@ DPDK_2.2 {
rte_eth_dev_uc_all_hash_table_set;
rte_eth_dev_uc_hash_table_set;
rte_eth_dev_vlan_filter;
- rte_eth_dev_wd_timeout_store;
rte_eth_dma_zone_reserve;
rte_eth_led_off;
rte_eth_led_on;
--
2.7.4
