From: Mandeep Rohilla <mrohi...@brocade.com>
The receive queue can lockup if all the rx descriptors have lost
their mbufs and temporarily there are no mbufs available. This
can happen if there is an mbuf leak or if the application holds
on to the mbuf for a while.
This also addresses an mbuf leak in an error condition during
packet receive.
Signed-off-by: Mandeep Rohilla <mrohi...@brocade.com>
---
drivers/net/vmxnet3/vmxnet3_rxtx.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/net/vmxnet3/vmxnet3_rxtx.c
b/drivers/net/vmxnet3/vmxnet3_rxtx.c
index d8713a1..d21679d 100644
--- a/drivers/net/vmxnet3/vmxnet3_rxtx.c
+++ b/drivers/net/vmxnet3/vmxnet3_rxtx.c
@@ -731,6 +731,7 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf
**rx_pkts, uint16_t nb_pkts)
uint16_t nb_rx;
uint32_t nb_rxd, idx;
uint8_t ring_idx;
+ uint8_t i;
vmxnet3_rx_queue_t *rxq;
Vmxnet3_RxCompDesc *rcd;
vmxnet3_buf_info_t *rbi;
@@ -800,6 +801,12 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf
**rx_pkts, uint16_t nb_pkts)
(int)(rcd - (struct Vmxnet3_RxCompDesc *)
rxq->comp_ring.base), rcd->rxdIdx);
rte_pktmbuf_free_seg(rxm);
+ if (rxq->start_seg) {
+ struct rte_mbuf *start = rxq->start_seg;
+
+ rxq->start_seg = NULL;
+ rte_pktmbuf_free(start);
+ }
goto rcd_done;
}
@@ -893,6 +900,18 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf
**rx_pkts, uint16_t nb_pkts)
}
}
+ /*
+ * Try to replenish the rx descriptors with the new mbufs
+ */
+ for (i = 0; i < VMXNET3_RX_CMDRING_SIZE; i++) {
+ vmxnet3_post_rx_bufs(rxq, i);
+ if (unlikely(rxq->shared->ctrl.updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(hw,
+ rxprod_reg[i] +
+ (rxq->queue_id * VMXNET3_REG_ALIGN),
+ rxq->cmd_ring[i].next2fill);
+ }
+ }
return nb_rx;
}
--
2.1.4
