On 5/17/2017 4:03 AM, John Daley wrote:
> Flow support for 1300 series adapters with the 'Advanced Filter'
> mode disabled via the UCS management interface. This allows:
> Attributes: ingress
> Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
> ipv6, udp, tcp.
> Actions: queue and void
> Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
>
> With advanced filters disabled, an IPv4 or IPv6 item must be specified
> in the pattern.
>
> Signed-off-by: John Daley <johnd...@cisco.com>
> Reviewed-by: Nelson Escobar <neesc...@cisco.com>
<...>
> @@ -193,6 +279,10 @@ static const enum rte_flow_action_type
> enic_supported_actions_v2[] = {
>
> /** Action capabilites indexed by NIC version information */
> static const struct enic_action_cap enic_action_cap[] = {
> + [FILTER_ACTION_RQ_STEERING_FLAG] = {
FILTER_ACTION_RQ_STEERING_FLAG doesn't defined anywhere which is causing
build error, compiler asks if you mean FILTER_ACTION_RQ_STEERING:
drivers/net/enic/enic_flow.c:318:3: error: use of undeclared identifier
'FILTER_ACTION_RQ_STEERING_FLAG'; did you mean 'FILTER_ACTION_RQ_STEERING'?
