This problem is caused by a missing set of E1000_RXCSUM_CRCOFL
in eth_igb_rx_init(), it should be set to enable SCTP packet
L4 checksum.If it is not set, the printf message in cksum fwd
about L4 SCTP cksum flag is error.
Fixes: d15fcf76c8b7 ("net/e1000: move to drivers/net/")
Signed-off-by: Wei Zhao <wei.zh...@intel.com>
---
drivers/net/e1000/igb_rxtx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c
index b3b601b..6c2749b 100644
--- a/drivers/net/e1000/igb_rxtx.c
+++ b/drivers/net/e1000/igb_rxtx.c
@@ -2402,10 +2402,11 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
/* Enable both L3/L4 rx checksum offload */
if (dev->data->dev_conf.rxmode.hw_ip_checksum)
- rxcsum |= (E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL);
+ rxcsum |= (E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL |
+ E1000_RXCSUM_CRCOFL);
else
- rxcsum &= ~(E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL);
- E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
+ rxcsum &= ~(E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL |
+ E1000_RXCSUM_CRCOFL);
/* Setup the Receive Control Register. */
if (dev->data->dev_conf.rxmode.hw_strip_crc) {
--
2.9.3
