Stop port before enabling QinQ.
Add commands to set inner and outer TPID's and start port.
Remove TPID's from flow validate and and flow create commands.
Signed-off-by: Bernard Iremonger <bernard.iremon...@intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++-----------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index ddd1d9257..bc949b755 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2834,16 +2834,29 @@ Output can be limited to specific groups::
Sample QinQ flow rules
~~~~~~~~~~~~~~~~~~~~~~
+Before creating QinQ rule(s) the following commands should be issued to enable
QinQ::
+
+ testpmd> port stop 0
+ testpmd> vlan set qinq on 0
+
+The above command sets the inner and outer TPID's to 0x8100.
+
+To change the TPID's the following commands should be used::
+
+ testpmd> vlan set outer tpid 0xa100 0
+ testpmd> vlan set inner tpid 0x9100 0
+ testpmd> port start 0
+
Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a
VM.
::
- testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4
/
- vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 123 /
+ vlan tci is 456 / end actions vf id 1 / queue index 0 / end
Flow rule #0 validated
- testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
- vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4 /
+ vlan tci is 456 / end actions vf id 123 / queue index 0 / end
Flow rule #0 created
testpmd> flow list 0
@@ -2854,12 +2867,12 @@ Validate and create a QinQ rule on port 0 to steer
traffic to a queue on the hos
::
- testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6
/
- vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 0 / end
Flow rule #1 validated
- testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
- vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 1 / end
Flow rule #1 created
testpmd> flow list 0
@@ -2867,7 +2880,3 @@ Validate and create a QinQ rule on port 0 to steer
traffic to a queue on the hos
0 0 0 i- ETH VLAN VLAN=>VF QUEUE
1 0 0 i- ETH VLAN VLAN=>PF QUEUE
-After creating QinQ rule(s) the following command should be issued to enable
QinQ::
-
- testpmd> vlan set qinq on 0
-
--
2.11.0
