Refer the section which explains driver compilation and running of testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thot...@caviumnetworks.com> --- doc/guides/nics/qede.rst | 116 ++--------------------------------------------- 1 file changed, 4 insertions(+), 112 deletions(-) diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst index eacb3da..4142057 100644 --- a/doc/guides/nics/qede.rst +++ b/doc/guides/nics/qede.rst @@ -124,119 +124,11 @@ enabling debugging options may affect system performance. Empty string indicates driver will pick up the firmware file from the default location. -Driver Compilation -~~~~~~~~~~~~~~~~~~ - -To compile QEDE PMD for Linux x86_64 gcc target, run the following ``make`` -command:: - - cd <DPDK-source-directory> - make config T=x86_64-native-linuxapp-gcc install - -To compile QEDE PMD for Linux x86_64 clang target, run the following ``make`` -command:: - - cd <DPDK-source-directory> - make config T=x86_64-native-linuxapp-clang install - -To compile QEDE PMD for FreeBSD x86_64 clang target, run the following ``gmake`` -command:: - - cd <DPDK-source-directory> - gmake config T=x86_64-native-bsdapp-clang install - -To compile QEDE PMD for FreeBSD x86_64 gcc target, run the following ``gmake`` -command:: - - cd <DPDK-source-directory> - gmake config T=x86_64-native-bsdapp-gcc install -Wl,-rpath=\ - /usr/local/lib/gcc49 CC=gcc49 - - -Sample Application Notes -~~~~~~~~~~~~~~~~~~~~~~~~ - -This section demonstrates how to launch ``testpmd`` with QLogic 4xxxx -devices managed by ``librte_pmd_qede`` in Linux operating system. - -#. Request huge pages: - - .. code-block:: console - - echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/ \ - nr_hugepages - -#. Load ``igb_uio`` driver: - - .. code-block:: console - - insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko - -#. Bind the QLogic 4xxxx adapters to ``igb_uio`` loaded in the - previous step: - - .. code-block:: console - - ./usertools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \ - 0000:84:00.2 0000:84:00.3 - -#. Start ``testpmd`` with basic parameters: - (Enable QEDE_DEBUG_INFO=y to view informational messages) - - .. code-block:: console - - testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \ - --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \ - --rss-ip --rss-udp - - [...] - - EAL: PCI device 0000:84:00.0 on NUMA socket 1 - EAL: probe driver: 1077:1634 rte_qede_pmd - EAL: Not managed by a supported kernel driver, skipped - EAL: PCI device 0000:84:00.1 on NUMA socket 1 - EAL: probe driver: 1077:1634 rte_qede_pmd - EAL: Not managed by a supported kernel driver, skipped - EAL: PCI device 0000:88:00.0 on NUMA socket 1 - EAL: probe driver: 1077:1656 rte_qede_pmd - EAL: PCI memory mapped at 0x7f738b200000 - EAL: PCI memory mapped at 0x7f738b280000 - EAL: PCI memory mapped at 0x7f738b300000 - PMD: Chip details : BB1 - PMD: Driver version : QEDE PMD 8.7.9.0_1.0.0 - PMD: Firmware version : 8.7.7.0 - PMD: Management firmware version : 8.7.8.0 - PMD: Firmware file : /lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_common_dev_init:macaddr \ - 00:0e:1e:d2:09:9c - [...] - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 0 num_desc 4096 \ - tx_free_thresh 4068 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 1 num_desc 4096 \ - tx_free_thresh 4068 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 2 num_desc 4096 \ - tx_free_thresh 4068 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 3 num_desc 4096 \ - tx_free_thresh 4068 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 0 num_desc 4096 \ - rx_buf_size=2148 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 1 num_desc 4096 \ - rx_buf_size=2148 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 2 num_desc 4096 \ - rx_buf_size=2148 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 3 num_desc 4096 \ - rx_buf_size=2148 socket 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:port 0 - [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:link status: down - [...] - Checking link statuses... - Port 0 Link Up - speed 25000 Mbps - full-duplex - Port 1 Link Up - speed 25000 Mbps - full-duplex - Port 2 Link Up - speed 25000 Mbps - full-duplex - Port 3 Link Up - speed 25000 Mbps - full-duplex - Done - testpmd> +Driver compilation and testing +------------------------------ +Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` +for details. SR-IOV: Prerequisites and Sample Application Notes ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- 1.8.3.1
