Steps for compiling PMDs and running testpmd in Linux are common among drivers. So it can be moved to a new document and be referred from other driver documentations.
This patchset adds a new section for compiling and testing a PMD in Network Interface Controller Drivers documentation. Other driver docs with similar part are replaced with reference to this section. v1 changes: * Address review comments from John. - Corrections to documentation. - Create a new section after NIC overview for the doc. - Refer the section instead of including it in PMD docs. * Change documentation of all PMDs with common part. RFC: * http://dpdk.org/ml/archives/dev/2017-April/062848.html Shijith Thotton (8): doc: add doc to explain compiling and testing of PMD doc: refer PMD compile and test section from liquidio doc doc: refer PMD compile and test section from bnx2x doc doc: refer PMD compile and test section from cxgbe doc doc: refer PMD compile and test section from ena doc doc: refer PMD compile and test section from i40e doc doc: refer PMD compile and test section from nfp doc doc: refer PMD compile and test section from qede doc doc/guides/nics/bnx2x.rst | 139 ++--------------------------------- doc/guides/nics/build_and_test.rst | 134 ++++++++++++++++++++++++++++++++++ doc/guides/nics/cxgbe.rst | 109 +++------------------------- doc/guides/nics/ena.rst | 66 +---------------- doc/guides/nics/i40e.rst | 77 ++------------------ doc/guides/nics/index.rst | 1 + doc/guides/nics/liquidio.rst | 90 +---------------------- doc/guides/nics/nfp.rst | 141 ++---------------------------------- doc/guides/nics/qede.rst | 116 +---------------------------- doc/guides/testpmd_app_ug/index.rst | 2 + 10 files changed, 173 insertions(+), 702 deletions(-) create mode 100644 doc/guides/nics/build_and_test.rst -- 1.8.3.1
