> -----Original Message----- > From: Ferruh Yigit [mailto:ferruh.yi...@intel.com] > Sent: Friday, March 24, 2017 8:29 PM > To: Hemant Agrawal <hemant.agra...@nxp.com>; dev@dpdk.org > Cc: thomas.monja...@6wind.com; bruce.richard...@intel.com; Shreyansh Jain > <shreyansh.j...@nxp.com>; john.mcnam...@intel.com; > jerin.ja...@caviumnetworks.com > Subject: Re: [PATCH v10 00/22] NXP DPAA2 PMD > > On 3/24/2017 1:35 PM, Hemant Agrawal wrote: > > This patches has been split from DPAA2 PMD v8 series [2] as per > > comments received on ML [3].) > > > > The patch series adds NXP’s QorIQ-Layerscape DPAA2 Architecture based > > network SoC PMD. This version of the driver supports NXP LS208xA, > > LS204xA and LS108x families Network SoCs. > > > > DPAA2, or Data Path Acceleration Architecture, is a hardware architecture > > designed for high-speed network packet processing. It uses a bus name > > ‘fslmc’, part of Linux Kernel Staging tree [1], for resource management. > > > > Dependency: > > This patchset is to be applied over > > a) NXP DPAA2 FSLMC Bus Patches [4] and > > b) NXP DPAA2 Mempool patches [5] > > > > Prerequisites: > > - For running the PMD, NXP's SoC (board) is required. > > Information about obtaining relevant software is available in the docs > > as part of the patch. > > > > References: > > [1] https://www.kernel.org/doc/readme/drivers-staging-fsl-mc-README.txt > > [2] http://dpdk.org/ml/archives/dev/2017-March/059000.html > > [3] http://dpdk.org/ml/archives/dev/2017-March/059789.html > > [4] http://dpdk.org/ml/archives/dev/2017-March/061258.html > > [5] http://dpdk.org/ml/archives/dev/2017-March/060476.html > > > > --- > > v10: > > * Rebased on next-net (b36be54c) > > * Removing "-Wno-strict-alias" from makefile > > > > v9: > > * Split into three series: 1) for FSLMC Bus, 2) Mempool and 3) PMD > > * Rebased over master (17.02, 630f6ec1) > > * remove the eth_driver usages > > > > v8: > > * rebased over master (17.02: 35b09d76) > > * Removed all drivers/common/* code and moved to drivers/bus/fslmc > > * Updated documentation to remove non-open source dependency > > * Reduced shared symbols in map files > > > > v7: > > * rebased over master (17.02) > > * fix the shared lib compilation > > * re partitiion the patches as per Ferruh comments. > > * handling Ferruh's comment for NXP dpaa2 driver > > > > v6: > > * rebased over master (61207d0) > > * removing DPAA2_COMMON as configurable option > > * renaming drivers bus, pool libraries removing 'pmd' > > * Headers of Licenses > > * exposed variable renaming with *rte_* prefix > > * handling Ferruh's comment for NXP dpaa2 driver > > * moving around MAINTAINER and DOC file patches > > > > v5: > > * rebased over master (6818a7f4) > > > > v4: > > * rebased over master (1feda4d8) and patches from Shreyansh [1] for Bus > Arch. > > > > v3: > > * rebased over master (eac901ce2) and patches from Shreyansh [1] for Bus > Arch. > > * Fixed comment from John on Patch-0003 for documentation > > * Removed Patch-0001 for rte_device in rte_eth_dev; Already upstreamed > through > > another series > > > > v2: > > * separated the "fsl-mc" bus from the dpaa2 pmd driver - introduced > drivers/bus > > * separated the "dpaa2" hw mempool from dpaa2 pmd driver - introduced > drivers/pool > > * removed documentation warnings and missing information. > > * removed arm64 part specific code from driver > > * changed rte_panic to errors > > * reduced checkpatch warnings > > > > Hemant Agrawal (22): > > net/dpaa2: introducing NXP DPAA2 PMD driver > > doc: add DPAA2 NIC details > > net/dpaa2: add debug log support > > config: enable support for DPAA2 debug logging > > net/dpaa2: add mc dpni object support > > net/dpaa2: adding eth ops to dpaa2 > > net/dpaa2: add RSS flow distribution > > net/dpaa2: configure MAC address at init > > net/dpaa2: attach the buffer pool to dpni > > net/dpaa2: add support for L3 and L4 checksum offload > > net/dpaa2: add support for promiscuous mode > > net/dpaa2: add MTU configuration support > > net/dpaa2: enable packet Rx and Tx operations > > net/dpaa2: support for Rx packet parsing and packet type > > net/dpaa2: link status update > > net/dpaa2: basic stats support > > net/dpaa2: enable stashing for LS2088A devices > > net/dpaa2: handle non-hardware backed buffer pool > > net/dpaa2: enable physical addressing for packet buffers > > config: add configuration for toggling physical addressing > > net/dpaa2: enable DMA Mapping during device scanning > > net/dpaa2: enable frame queue based dequeuing > > Series applied to dpdk-next-net/master, thanks.
Thank you Ferruh.
