On 3/23/2017 8:04 PM, Ferruh Yigit wrote:
On 3/17/2017 1:08 PM, Hemant Agrawal wrote:
(This patches has been split from DPAA2 PMD v8 series [2] as per
comments received on ML [3].)
The patch series adds NXP’s QorIQ-Layerscape DPAA2 Architecture based
network SoC PMD. This version of the driver supports NXP LS208xA,
LS204xA and LS108x families Network SoCs.
DPAA2, or Data Path Acceleration Architecture, is a hardware architecture
designed for high-speed network packet processing. It uses a bus name
‘fslmc’, part of Linux Kernel Staging tree [1], for resource management.
Dependency:
This patchset is to be applied over
a) NXP DPAA2 FSLMC Bus Patches [4] and
b) NXP DPAA2 Mempool patches [5]
Prerequisites:
- For running the PMD, NXP's SoC (board) is required.
Information about obtaining relevant software is available in the docs
as part of the patch.
References:
[1] https://www.kernel.org/doc/readme/drivers-staging-fsl-mc-README.txt
[2] http://dpdk.org/ml/archives/dev/2017-March/059000.html
[3] http://dpdk.org/ml/archives/dev/2017-March/059789.html
[4] http://dpdk.org/ml/archives/dev/2017-March/060453.html
[5] http://dpdk.org/ml/archives/dev/2017-March/060476.html
---
v9:
* Split into three series: 1) for FSLMC Bus, 2) Mempool and 3) PMD
* Rebased over master (17.02, 630f6ec1)
* remove the eth_driver usages
v8:
* rebased over master (17.02: 35b09d76)
* Removed all drivers/common/* code and moved to drivers/bus/fslmc
* Updated documentation to remove non-open source dependency
* Reduced shared symbols in map files
v7:
* rebased over master (17.02)
* fix the shared lib compilation
* re partitiion the patches as per Ferruh comments.
* handling Ferruh's comment for NXP dpaa2 driver
v6:
* rebased over master (61207d0)
* removing DPAA2_COMMON as configurable option
* renaming drivers bus, pool libraries removing 'pmd'
* Headers of Licenses
* exposed variable renaming with *rte_* prefix
* handling Ferruh's comment for NXP dpaa2 driver
* moving around MAINTAINER and DOC file patches
v5:
* rebased over master (6818a7f4)
v4:
* rebased over master (1feda4d8) and patches from Shreyansh [1] for Bus Arch.
v3:
* rebased over master (eac901ce2) and patches from Shreyansh [1] for Bus Arch.
* Fixed comment from John on Patch-0003 for documentation
* Removed Patch-0001 for rte_device in rte_eth_dev; Already upstreamed through
another series
v2:
* separated the "fsl-mc" bus from the dpaa2 pmd driver - introduced drivers/bus
* separated the "dpaa2" hw mempool from dpaa2 pmd driver - introduced
drivers/pool
* removed documentation warnings and missing information.
* removed arm64 part specific code from driver
* changed rte_panic to errors
* reduced checkpatch warnings
Hemant Agrawal (22):
net/dpaa2: introducing NXP DPAA2 PMD driver
doc: add DPAA2 NIC details
net/dpaa2: add debug log support
config: enable support for DPAA2 debug logging
net/dpaa2: add mc dpni object support
net/dpaa2: adding eth ops to dpaa2
net/dpaa2: add RSS flow distribution
net/dpaa2: configure MAC address at init
net/dpaa2: attach the buffer pool to dpni
net/dpaa2: add support for L3 and L4 checksum offload
net/dpaa2: add support for promiscuous mode
net/dpaa2: add MTU configuration support
net/dpaa2: enable packet Rx and Tx operations
net/dpaa2: support for Rx packet parsing and packet type
net/dpaa2: link status update
net/dpaa2: basic stats support
net/dpaa2: enable stashing for LS2088A devices
net/dpaa2: handle non-hardware backed buffer pool
net/dpaa2: enable physical addressing for packet buffers
config: add configuration for toggling physical addressing
net/dpaa2: enable DMA Mapping during device scanning
net/dpaa2: enable frame queue based dequeuing
Hi Hemant, Shreyansh,
Can you please rebase the patchset on top of latest next-net, I am
getting some merge conflics.
Also patchset should update release_17_05.rst, instead of release_17_02.rst.
Sure, we will do it asap.
Thanks,
ferruh
