Hi Akhil, > -----Original Message----- > From: Akhil Goyal [mailto:akhil.go...@nxp.com] > Sent: Friday, March 03, 2017 7:49 PM > To: dev@dpdk.org > Cc: thomas.monja...@6wind.com; Doherty, Declan; De Lara Guarch, Pablo; > Mcnamara, John; nhor...@tuxdriver.com; hemant.agra...@nxp.com; > Akhil Goyal > Subject: [PATCH v5 02/12] crypto/dpaa2_sec: add dpaa2 sec poll mode > driver > > Signed-off-by: Hemant Agrawal <hemant.agra...@nxp.com> > Signed-off-by: Akhil Goyal <akhil.go...@nxp.com>
... > diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc > b/config/defconfig_arm64-dpaa2-linuxapp-gcc > index 29a56c7..50ba0d6 100644 > --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc > +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc > @@ -65,3 +65,15 @@ CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n > CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n > CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n > CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n > + > +#Compile NXP DPAA2 crypto sec driver for CAAM HW > +CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=y > +CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n > +CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n > +CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n > + > +# > +# Number of sessions to create in the session memory pool > +# on a single DPAA2 SEC device. > +# > +CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048 > diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile > index 8f7864b..3ef7f2e 100644 > --- a/drivers/bus/Makefile > +++ b/drivers/bus/Makefile > @@ -32,6 +32,9 @@ > include $(RTE_SDK)/mk/rte.vars.mk > > CONFIG_RTE_LIBRTE_FSLMC_BUS = $(CONFIG_RTE_LIBRTE_DPAA2_PMD) > +ifneq ($(CONFIG_RTE_LIBRTE_FSLMC_BUS),y) > +CONFIG_RTE_LIBRTE_FSLMC_BUS = > $(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) I assume that this patchset sits on top of the dpaa2 network driver. With that one applied, there is a conflict here. Could you rebase this patch against that one and submit a v6? Thanks! Pablo
