On 3/18/2017 7:05 AM, Rasesh Mody wrote:
> Hi,
>
> This patch set adds support for new firmware 8.18.9.0, new features and
> bug fixes.
>
> Please apply to dpdk-net-next for 17.05 release. Note that this patch set
> depends on http://dpdk.org/dev/patchwork/patch/21896.
>
> v1..v2
> - address all the review comments received so far
>
> Thanks!
> Rasesh
>
> Harish Patil (3):
> net/qede/base: add support for arfs mode
> net/qede: add ntuple and flow director filter support
> net/qede: add LRO/TSO offloads support
>
> Rasesh Mody (58):
> net/qede/base: return an initialized return value
> net/qede/base: send FW version driver state to MFW
> net/qede/base: mask Rx buffer attention bits
> net/qede/base: print various indication on Tx-timeouts
> net/qede/base: utilize FW 8.18.9.0
> net/qede: upgrade the FW to 8.18.9.0
> net/qede/base: decrease maximum HW func per device
> net/qede/base: move mask constants defining NIC type
> net/qede/base: remove attribute from update current config
> net/qede/base: add nvram options
> net/qede/base: add comment
> net/qede/base: use default MTU from shared memory
> net/qede/base: change queue/sb-id from 8 bit to 16 bit
> net/qede/base: update MFW when default MTU is changed
> net/qede/base: prevent device init failure
> net/qede/base: read card personality via MFW commands
> net/qede/base: allow probe to succeed with minor HW-issues
> net/qede/base: remove unneeded step in HW init
> net/qede/base: allow only trusted VFs to be promisc
> net/qede/base: qm initialization revamp
> net/qede/base: print firmware MFW and MBI versions
> net/qede/base: check active VF queues before stopping
> net/qede/base: set driver type before sending load request
> net/qede/base: prevent driver laod with invalid resources
> net/qede/base: add interfaces for MFW TLV request processing
> net/qede/base: code refactoring of SP queues
> net/qede/base: make L2 queues handle based
> net/qede/base: add support for handling TLV request from MFW
> net/qede/base: optimize cache-line access
> net/qede/base: infrastructure changes for VF tunnelling
> net/qede/base: revise tunnel APIs/structs
> net/qede/base: add tunnelling support for VFs
> net/qede/base: formatting changes
> net/qede/base: prevent transmitter stuck condition
> net/qede/base: add mask/shift defines for resource command
> net/qede/base: add API for using MFW resource lock
> net/qede/base: remove clock slowdown option
> net/qede/base: add new image types
> net/qede/base: use L2-handles for RSS configuration
> net/qede/base: change valloc to vzalloc
> net/qede/base: add support for previous driver unload
> net/qede/base: add non-L2 dcbx tlv application support
> net/qede/base: update bulletin board during VF init
> net/qede/base: add coalescing support for VFs
> net/qede/base: add macro got resource value message
> net/qede/base: add mailbox for resource allocation
> net/qede/base: add macro for unsupported command
> net/qede/base: set max values for soft resoruces
> net/qede/base: add return code check
> net/qede/base: zero out MFW mailbox data
> net/qede/base: move code bits
> net/qede/base: add PF parameter
> net/qede/base: allow PMD to control vport and RSS engine ids
> net/qede/base: add udp ports in bulletin board message
> net/qede/base: prevent DMAE transactions during recovery
> net/qede/base: multi-Txq support on same queue-zone for VFs
> net/qede/base: prevent race condition during unload
> net/qede/base: semantic changes
>
Hi Rasesh,
Getting following build errors, one with clang [1] and other with 32bit
[2], I have not investigated which patch cause the error, just
copy-pasting the build errors.
These looks like same build errors with previous version of the patchset.
[1]
.../drivers/net/qede/qede_rxtx.c:1202:21: error: variable 'pad' is
uninitialized when used here [-Werror,-Wuninitialized]
rx_mb->data_off = pad + RTE_PKTMBUF_HEADROOM;
^~~
.../drivers/net/qede/qede_rxtx.c:997:14: note: initialize the variable
'pad' to silence this warning
uint16_t pad;
^
= 0
[2]
.../drivers/net/qede/qede_fdir.c: In function ‘qede_config_cmn_fdir_filter’:
.../drivers/net/qede/qede_fdir.c:126:44: error: format ‘%lx’ expects
argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t
{aka long long unsigned int}’ [-Werror=format=]
snprintf(mz_name, sizeof(mz_name) - 1, "%lx", rte_get_timer_cycles());
^
