> From: Ferruh Yigit [mailto:ferruh.yi...@intel.com] > Sent: Friday, March 03, 2017 2:25 AM > > On 2/27/2017 7:56 AM, Rasesh Mody wrote: > > Hi, > > > > This patch set adds support for new firmware 8.18.9.0, new features > > and bug fixes. > > This looks like depends other qede driver patchset [1], can you please > confirm? If so, it helps to mention from it here.
Yes, this patch set depended on [1]. Note added in v2 submission. > > Also I am getting following build errors [2]. A part of if..else got in into our final submission unintentionally, sorry about that. [2] addressed in v2 submission. > > And there are some checkpatch and check-git-log.sh [3] errors. [3] addressed in v2 submission. Thanks! -Rasesh > > Thanks, > ferruh > > [1] > http://dpdk.org/dev/patchwork/patch/20816/ [patchset with 21 patches] > > > > [2] > .../drivers/net/qede/base/ecore_dev.c:1703:4: error: use of undeclared > identifier 'ECORE_E5_MISSING_CODE' > ECORE_E5_MISSING_CODE; > ^ > 1 error generated. > make[7]: *** [base/ecore_dev.o] Error 1 > make[7]: *** Waiting for unfinished jobs.... > .../drivers/net/qede/qede_rxtx.c:1202:21: error: variable 'pad' is > uninitialized > when used here [-Werror,-Wuninitialized] > rx_mb->data_off = pad + RTE_PKTMBUF_HEADROOM; > ^~~ > .../drivers/net/qede/qede_rxtx.c:997:14: note: initialize the variable 'pad' > to > silence this warning > uint16_t pad; > ^ > = 0 > 1 error generated. > > .../drivers/net/qede/qede_fdir.c: In function 'qede_config_cmn_fdir_filter': > .../drivers/net/qede/qede_fdir.c:126:44: error: format '%lx' expects > argument of type 'long unsigned int', but argument 4 has type 'uint64_t {aka > long long unsigned int}' [-Werror=format=] > snprintf(mz_name, sizeof(mz_name) - 1, "%lx", rte_get_timer_cycles()); > > > > [3] > Wrong headline format: > send FW version driver state to MFW > net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2 > net/qede/base: add a printout of the FW, MFW and MBI versions > net/qede/base: set the drv_type before sending load request Wrong > headline prefix: > send FW version driver state to MFW > drivers/net/qede: upgrade the FW to 8.18.9.0 Wrong headline > uppercase: > net/qede/base: L2 handler changes > net/qede/base: Add support to set max values of soft resoruces Wrong > headline lowercase: > net/qede/base: use default mtu from shared memory > net/qede/base: update MFW when default mtu is changed > net/qede/base: add non-l2 dcbx tlv application support > net/qede/base: allow PMD to control vport-id and rss-eng-id Headline > too long: > net/qede/base: remove attribute field from update current config > net/qede/base: add support to read personality via MFW commands > net/qede/base: allow only trusted VFs to be promisc/multi-promisc > net/qede/base: add a printout of the FW, MFW and MBI versions > net/qede/base: update bulletin board with link state during init > net/qede/base: Add support to set max values of soft resoruces > net/qede/base: add multi-Txq support on same queue-zone for VFs > net/qede/base: fix race cond between MFW attentions and PF stop > Missing 'Fixes' tag: > net/qede/base: fix to set pointers to NULL after freeing > net/qede/base: fix race cond between MFW attentions and PF stop > > > > > > > Please apply to dpdk-net-next for 17.05 release. > > > > Thanks! > > Rasesh > > > > Harish Patil (3): > > net/qede/base: add support for arfs mode > > net/qede: add ntuple and flow director filter support > > net/qede: add LRO/TSO offloads support > > > > Rasesh Mody (58): > > net/qede/base: return an initialized return value > > send FW version driver state to MFW > > net/qede/base: mask Rx buffer attention bits > > net/qede/base: print various indication on Tx-timeouts > > net/qede/base: utilize FW 8.18.9.0 > > drivers/net/qede: upgrade the FW to 8.18.9.0 > > net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2 > > net/qede/base: move mask constants defining NIC type > > net/qede/base: remove attribute field from update current config > > net/qede/base: add nvram options > > net/qede/base: add comment > > net/qede/base: use default mtu from shared memory > > net/qede/base: change queue/sb-id from 8 bit to 16 bit > > net/qede/base: update MFW when default mtu is changed > > net/qede/base: prevent device init failure > > net/qede/base: add support to read personality via MFW commands > > net/qede/base: allow probe to succeed with minor HW-issues > > net/qede/base: remove unneeded step in HW init > > net/qede/base: allow only trusted VFs to be promisc/multi-promisc > > net/qede/base: qm initialization revamp > > net/qede/base: add a printout of the FW, MFW and MBI versions > > net/qede/base: check active VF queues before stopping > > net/qede/base: set the drv_type before sending load request > > net/qede/base: prevent driver laod with invalid resources > > net/qede/base: add interfaces for MFW TLV request processing > > net/qede/base: fix to set pointers to NULL after freeing > > net/qede/base: L2 handler changes > > net/qede/base: add support for handling TLV request from MFW > > net/qede/base: optimize cache-line access > > net/qede/base: infrastructure changes for VF tunnelling > > net/qede/base: revise tunnel APIs/structs > > net/qede/base: add tunnelling support for VFs > > net/qede/base: formatting changes > > net/qede/base: prevent transmitter stuck condition > > net/qede/base: add mask/shift defines for resource command > > net/qede/base: add API for using MFW resource lock > > net/qede/base: remove clock slowdown option > > net/qede/base: add new image types > > net/qede/base: use L2-handles for RSS configuration > > net/qede/base: change valloc to vzalloc > > net/qede/base: add support for previous driver unload > > net/qede/base: add non-l2 dcbx tlv application support > > net/qede/base: update bulletin board with link state during init > > net/qede/base: add coalescing support for VFs > > net/qede/base: add macro got resource value message > > net/qede/base: add mailbox for resource allocation > > net/qede/base: add macro for unsupported command > > net/qede/base: Add support to set max values of soft resoruces > > net/qede/base: add return code check > > net/qede/base: zero out MFW mailbox data > > net/qede/base: move code bits > > net/qede/base: add PF parameter > > net/qede/base: allow PMD to control vport-id and rss-eng-id > > net/qede/base: add udp ports in bulletin board message > > net/qede/base: prevent DMAE transactions during recovery > > net/qede/base: add multi-Txq support on same queue-zone for VFs > > net/qede/base: fix race cond between MFW attentions and PF stop > > net/qede/base: semantic changes > > <...>
