-----Original Message-----
From: Gowrishankar [mailto:gowrishanka...@linux.vnet.ibm.com]
Sent: 2017年3月6日 23:04
To: dev@dpdk.org
Cc: Chao Zhu <chao...@linux.vnet.ibm.com>; Anatoly Burakov
<anatoly.bura...@intel.com>; Thomas Monjalon <thomas.monja...@6wind.com>;
Gowrishankar Muthukrishnan <gowrishanka...@linux.vnet.ibm.com>
Subject: [PATCH v3] eal: sPAPR IOMMU support in pci probing for vfio-pci in
ppc64le
From: Gowrishankar Muthukrishnan <gowrishanka...@linux.vnet.ibm.com>
Below changes adds pci probing support for vfio-pci devices in power8.
v3 - better validation for kernel not implementing few iocts called
v2 - kernel version checked and doc updated
Signed-off-by: Gowrishankar Muthukrishnan
<gowrishanka...@linux.vnet.ibm.com>
---
doc/guides/rel_notes/release_17_05.rst | 4 ++
lib/librte_eal/linuxapp/eal/eal_vfio.c | 90
++++++++++++++++++++++++++++++++++
lib/librte_eal/linuxapp/eal/eal_vfio.h | 25 ++++++++++
3 files changed, 119 insertions(+)
diff --git a/doc/guides/rel_notes/release_17_05.rst
b/doc/guides/rel_notes/release_17_05.rst
index e25ea9f..4b90036 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -42,6 +42,10 @@ New Features
=========================================================
+* **Added powerpc support in pci probing for vfio-pci devices.**
+
+ sPAPR IOMMU based pci probing enabled for vfio-pci devices.
+
Resolved Issues
---------------
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c
b/lib/librte_eal/linuxapp/eal/eal_vfio.c
index 702f7a2..9377a66 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
@@ -50,12 +50,15 @@
static struct vfio_config vfio_cfg;
static int vfio_type1_dma_map(int);
+static int vfio_spapr_dma_map(int);
static int vfio_noiommu_dma_map(int);
/* IOMMU types we support */
static const struct vfio_iommu_type iommu_types[] = {
/* x86 IOMMU, otherwise known as type 1 */
{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
+ /* ppc64 IOMMU, otherwise known as spapr */
+ { RTE_VFIO_SPAPR, "sPAPR", &vfio_spapr_dma_map},
/* IOMMU-less mode */
{ RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map}, }; @@ -540,
6 +543,93 @@ int vfio_setup_device(const char *sysfs_base, const char
*dev_addr, }
static int
+vfio_spapr_dma_map(int vfio_container_fd) {
+ const struct rte_memseg *ms = rte_eal_get_physmem_layout();
+ int i, ret;
+
+ struct vfio_iommu_spapr_register_memory reg = {
+ .argsz = sizeof(reg),
+ .flags = 0
+ };
+ struct vfio_iommu_spapr_tce_info info = {
+ .argsz = sizeof(info),
+ };
+ struct vfio_iommu_spapr_tce_create create = {
+ .argsz = sizeof(create),
+ };
+ struct vfio_iommu_spapr_tce_remove remove = {
+ .argsz = sizeof(remove),
+ };
+
+ /* query spapr iommu info */
+ ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO,
&info);
+ if (ret) {
+ RTE_LOG(ERR, EAL, " cannot get iommu info, "
+ "error %i (%s)\n", errno, strerror(errno));
+ return -1;
+ }
+
+ /* remove default DMA of 32 bit window */
+ remove.start_addr = info.dma32_window_start;
+ ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_REMOVE,
&remove);
+ if (ret) {
+ RTE_LOG(ERR, EAL, " cannot remove default DMA window, "
+ "error %i (%s)\n", errno, strerror(errno));
+ return -1;
+ }
+
+ /* calculate window size based on number of hugepages configured */
+ create.window_size = rte_eal_get_physmem_size();
+ create.page_shift = __builtin_ctzll(ms->hugepage_sz);
+ create.levels = 2;
+
+ ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_CREATE,
&create);
+ if (ret) {
+ RTE_LOG(ERR, EAL, " cannot create new DMA window, "
+ "error %i (%s)\n", errno, strerror(errno));
+ return -1;
+ }
+
+ /* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */
+ for (i = 0; i < RTE_MAX_MEMSEG; i++) {
+ struct vfio_iommu_type1_dma_map dma_map;
+
+ if (ms[i].addr == NULL)
+ break;
+
+ reg.vaddr = (uintptr_t) ms[i].addr;
+ reg.size = ms[i].len;
+ ret = ioctl(vfio_container_fd,
+ VFIO_IOMMU_SPAPR_REGISTER_MEMORY, ®);
+ if (ret) {
+ RTE_LOG(ERR, EAL, " cannot register vaddr for
IOMMU, "
+ "error %i (%s)\n", errno, strerror(errno));
+ return -1;
+ }
+
+ memset(&dma_map, 0, sizeof(dma_map));
+ dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
+ dma_map.vaddr = ms[i].addr_64;
+ dma_map.size = ms[i].len;
+ dma_map.iova = ms[i].phys_addr;
+ dma_map.flags = VFIO_DMA_MAP_FLAG_READ |
+ VFIO_DMA_MAP_FLAG_WRITE;
+
+ ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA,
&dma_map);
+
+ if (ret) {
+ RTE_LOG(ERR, EAL, " cannot set up DMA remapping, "
+ "error %i (%s)\n", errno, strerror(errno));
+ return -1;
+ }
+
+ }
+
+ return 0;
+}
+
+static int
vfio_noiommu_dma_map(int __rte_unused vfio_container_fd) {
/* No-IOMMU mode does not need DMA mapping */ diff --git
a/lib/librte_eal/linuxapp/eal/eal_vfio.h
b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index 29f7f3e..ac31a4f 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -54,6 +54,31 @@
#define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
+#ifndef VFIO_SPAPR_TCE_v2_IOMMU
+#define RTE_VFIO_SPAPR 7
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+struct vfio_iommu_spapr_register_memory {
+ uint32_t argsz;
+ uint32_t flags;
+ uint64_t vaddr;
+ uint64_t size;
+};
+struct vfio_iommu_spapr_tce_create {
+ uint32_t argsz;
+ uint32_t page_shift;
+ uint64_t window_size;
+ uint32_t levels;
+};
+struct vfio_iommu_spapr_tce_remove {
+ uint32_t argsz;
+ uint64_t start_addr;
+};
+#else
+#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU #endif
+
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0) #define RTE_VFIO_NOIOMMU
8 #else
--
1.9.1
Acked-by: Chao Zhu <chao...@linux.vnet.ibm.com>
