Signed-off-by: Hemant Agrawal <hemant.agra...@nxp.com>
---
drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 66 +++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index c26360d3..ad8a22f 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -175,6 +175,72 @@ struct qbman_fle {
*/
#define DPAA2_EQ_RESP_ALWAYS 1
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+static void *dpaa2_mem_ptov(phys_addr_t paddr) __attribute__((unused));
+/* todo - this is costly, need to write a fast coversion routine */
+static void *dpaa2_mem_ptov(phys_addr_t paddr)
+{
+ const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+ int i;
+
+ for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+ if (paddr >= memseg[i].phys_addr &&
+ (char *)paddr < (char *)memseg[i].phys_addr + memseg[i].len)
+ return (void *)(memseg[i].addr_64
+ + (paddr - memseg[i].phys_addr));
+ }
+ return NULL;
+}
+
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) __attribute__((unused));
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
+{
+ const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+ int i;
+
+ for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+ if (vaddr >= memseg[i].addr_64 &&
+ vaddr < memseg[i].addr_64 + memseg[i].len)
+ return memseg[i].phys_addr
+ + (vaddr - memseg[i].addr_64);
+ }
+ return (phys_addr_t)(NULL);
+}
+
+/**
+ * When we are using Physical addresses as IO Virtual Addresses,
+ * Need to call conversion routines dpaa2_mem_vtop & dpaa2_mem_ptov
+ * whereever required.
+ * These routines are called with help of below MACRO's
+ */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_physaddr)
+
+/**
+ * macro to convert Virtual address to IOVA
+ */
+#define DPAA2_VADDR_TO_IOVA(_vaddr) dpaa2_mem_vtop((uint64_t)(_vaddr))
+
+/**
+ * macro to convert IOVA to Virtual address
+ */
+#define DPAA2_IOVA_TO_VADDR(_iova) dpaa2_mem_ptov((phys_addr_t)(_iova))
+
+/**
+ * macro to convert modify the memory containing IOVA to Virtual address
+ */
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type) \
+ {_mem = (_type)(dpaa2_mem_ptov((phys_addr_t)(_mem))); }
+
+#else /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_addr)
+#define DPAA2_VADDR_TO_IOVA(_vaddr) (_vaddr)
+#define DPAA2_IOVA_TO_VADDR(_iova) (_iova)
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type)
+
+#endif /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
struct dpaa2_dpbp_dev *dpaa2_alloc_dpbp_dev(void);
void dpaa2_free_dpbp_dev(struct dpaa2_dpbp_dev *dpbp);
--
1.9.1
