@@ -2422,6 +2449,136 @@ struct crypto_data_params
aes_cbc_hmac_sha256_output[MAX_PACKET_SIZE_INDEX] = {
return TEST_SUCCESS;
}
+static int
+test_perf_armv8_optimise_cyclecount(struct perf_test_params *pparams)
+{
+ uint32_t num_to_submit = pparams->total_operations;
+ struct rte_crypto_op *c_ops[num_to_submit];
+ struct rte_crypto_op *proc_ops[num_to_submit];
+ uint64_t failed_polls, retries, start_cycles, end_cycles,
+ total_cycles = 0;
+ uint32_t burst_sent = 0, burst_received = 0;
+ uint32_t i, burst_size, num_sent, num_ops_received;
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_armv8_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate Crypto op data structure(s)*/
+ for (i = 0; i < num_to_submit ; i++) {
+ struct rte_mbuf *m = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+ TEST_ASSERT_NOT_NULL(m, "Failed to allocate tx_buf");
+
+ struct rte_crypto_op *op =
+ rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(op, "Failed to allocate op");
+
+ op = test_perf_set_crypto_op_aes(op, m, sess, pparams->buf_size,
+ digest_length);
+ TEST_ASSERT_NOT_NULL(op, "Failed to attach op to session");
+
+ c_ops[i] = op;
+ }
+
+ printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, cipher key length:%u, "
+ "auth_algo:%s, Packet Size %u bytes",
+ pmd_name(gbl_cryptodev_perftest_devtype),
+ ts_params->dev_id, 0,
+ chain_mode_name(pparams->chain),
+ cipher_algo_name(pparams->cipher_algo),
+ pparams->cipher_key_length,
+ auth_algo_name(pparams->auth_algo),
+ pparams->buf_size);
+ printf("\nOps Tx\tOps Rx\tOps/burst ");
+ printf("Retries "
+ "EmptyPolls\tIACycles/CyOp\tIACycles/Burst\tIACycles/Byte");
+
+ for (i = 2; i <= 128 ; i *= 2) {
+ num_sent = 0;
+ num_ops_received = 0;
+ retries = 0;
+ failed_polls = 0;
+ burst_size = i;
+ total_cycles = 0;
+ while (num_sent < num_to_submit) {
+ start_cycles = rte_rdtsc_precise();
+ burst_sent = rte_cryptodev_enqueue_burst(
+ ts_params->dev_id,
+ 0, &c_ops[num_sent],
+ ((num_to_submit - num_sent) < burst_size) ?
+ num_to_submit - num_sent : burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_sent == 0)
+ retries++;
+ num_sent += burst_sent;
+ total_cycles += (end_cycles - start_cycles);
+
+ /* Wait until requests have been sent. */
+ rte_delay_ms(1);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops,
+ burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_received < burst_sent)
+ failed_polls++;
+ num_ops_received += burst_received;
+
+ total_cycles += end_cycles - start_cycles;
+ }
+
+ while (num_ops_received != num_to_submit) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(
+ ts_params->dev_id, 0, NULL, 0);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops, burst_size);
+ end_cycles = rte_rdtsc_precise();
+
+ total_cycles += end_cycles - start_cycles;
+ if (burst_received == 0)
+ failed_polls++;
+ num_ops_received += burst_received;
+ }
+
+ printf("\n%u\t%u\t%u", num_sent, num_ops_received, burst_size);
+ printf("\t\t%"PRIu64, retries);
+ printf("\t%"PRIu64, failed_polls);
+ printf("\t\t%"PRIu64, total_cycles/num_ops_received);
+ printf("\t\t%"PRIu64,
+ (total_cycles/num_ops_received)*burst_size);
+ printf("\t\t%"PRIu64,
+ total_cycles/(num_ops_received*pparams->buf_size));
+ }
+ printf("\n");
+
+ for (i = 0; i < num_to_submit ; i++) {
+ rte_pktmbuf_free(c_ops[i]->sym->m_src);
+ rte_crypto_op_free(c_ops[i]);
+ }
+
+ return TEST_SUCCESS;
+}
+
static uint32_t get_auth_key_max_length(enum rte_crypto_auth_algorithm algo)
{
switch (algo) {
@@ -2683,6 +2840,56 @@ static uint32_t get_auth_digest_length(enum
rte_crypto_auth_algorithm algo)
}
}
+static struct rte_cryptodev_sym_session *
+test_perf_create_armv8_session(uint8_t dev_id, enum chain_mode chain,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
+ enum rte_crypto_auth_algorithm auth_algo)
+{
+ struct rte_crypto_sym_xform cipher_xform = { 0 };
+ struct rte_crypto_sym_xform auth_xform = { 0 };
+
+ /* Setup Cipher Parameters */
+ cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ cipher_xform.cipher.algo = cipher_algo;
+
+ switch (cipher_algo) {
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ cipher_xform.cipher.key.data = aes_cbc_128_key;
+ break;
+ default:
+ return NULL;
+ }
+
+ cipher_xform.cipher.key.length = cipher_key_len;
+
+ /* Setup Auth Parameters */
+ auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+ auth_xform.auth.algo = auth_algo;
+
+ auth_xform.auth.digest_length = get_auth_digest_length(auth_algo);
+
+ switch (chain) {
+ case CIPHER_HASH:
+ cipher_xform.next = &auth_xform;
+ auth_xform.next = NULL;
+ /* Encrypt and hash the result */
+ cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &cipher_xform);
+ case HASH_CIPHER:
+ auth_xform.next = &cipher_xform;
+ cipher_xform.next = NULL;
+ /* Hash encrypted message and decrypt */
+ cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &auth_xform);
+ default:
+ return NULL;
+ }
+}
+
#define AES_BLOCK_SIZE 16
#define AES_CIPHER_IV_LENGTH 16
@@ -3356,6 +3563,138 @@ static uint32_t get_auth_digest_length(enum
rte_crypto_auth_algorithm algo)
return TEST_SUCCESS;
}
+static int
+test_perf_armv8(uint8_t dev_id, uint16_t queue_id,
+ struct perf_test_params *pparams)
+{
+ uint16_t i, k, l, m;
+ uint16_t j = 0;
+ uint16_t ops_unused = 0;
+ uint16_t burst_size;
+ uint16_t ops_needed;
+
+ uint64_t burst_enqueued = 0, total_enqueued = 0, burst_dequeued = 0;
+ uint64_t processed = 0, failed_polls = 0, retries = 0;
+ uint64_t tsc_start = 0, tsc_end = 0;
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ struct rte_crypto_op *ops[pparams->burst_size];
+ struct rte_crypto_op *proc_ops[pparams->burst_size];
+
+ struct rte_mbuf *mbufs[pparams->burst_size * NUM_MBUF_SETS];
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_armv8_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate a burst of crypto operations */
+ for (i = 0; i < (pparams->burst_size * NUM_MBUF_SETS); i++) {
+ mbufs[i] = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+
+ if (mbufs[i] == NULL) {
+ printf("\nFailed to get mbuf - freeing the rest.\n");
+ for (k = 0; k < i; k++)
+ rte_pktmbuf_free(mbufs[k]);
+ return -1;
+ }
+ }
+
+ tsc_start = rte_rdtsc_precise();
+
+ while (total_enqueued < pparams->total_operations) {
+ if ((total_enqueued + pparams->burst_size) <=
+ pparams->total_operations)
+ burst_size = pparams->burst_size;
+ else
+ burst_size = pparams->total_operations - total_enqueued;
+
+ ops_needed = burst_size - ops_unused;
+
+ if (ops_needed != rte_crypto_op_bulk_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC, ops, ops_needed)){
+ printf("\nFailed to alloc enough ops, finish dequeuing "
+ "and free ops below.");
+ } else {
+ for (i = 0; i < ops_needed; i++)
+ ops[i] = test_perf_set_crypto_op_aes(ops[i],
+ mbufs[i + (pparams->burst_size *
+ (j % NUM_MBUF_SETS))],
+ sess, pparams->buf_size, digest_length);
+
+ /* enqueue burst */
+ burst_enqueued = rte_cryptodev_enqueue_burst(dev_id,
+ queue_id, ops, burst_size);
+
+ if (burst_enqueued < burst_size)
+ retries++;
+
+ ops_unused = burst_size - burst_enqueued;
+ total_enqueued += burst_enqueued;
+ }
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (l = 0; l < burst_dequeued; l++)
+ rte_crypto_op_free(proc_ops[l]);
+ }
+ j++;
+ }
+
+ /* Dequeue any operations still in the crypto device */
+ while (processed < pparams->total_operations) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(dev_id, queue_id, NULL, 0);
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (m = 0; m < burst_dequeued; m++)
+ rte_crypto_op_free(proc_ops[m]);
+ }
+ }
+
+ tsc_end = rte_rdtsc_precise();
+
+ double ops_s = ((double)processed / (tsc_end - tsc_start))
+ * rte_get_tsc_hz();
+ double throughput = (ops_s * pparams->buf_size * NUM_MBUF_SETS)
+ / 1000000000;
+
+ printf("\t%u\t%6.2f\t%10.2f\t%8"PRIu64"\t%8"PRIu64, pparams->buf_size,
+ ops_s / 1000000, throughput, retries, failed_polls);
+
+ for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
+ rte_pktmbuf_free(mbufs[i]);
+
+ printf("\n");
+ return TEST_SUCCESS;
+}
+
/*
perf_test_aes_sha("avx2", HASH_CIPHER, 16, CBC, SHA1);
@@ -3664,6 +4003,125 @@ static uint32_t get_auth_digest_length(enum
rte_crypto_auth_algorithm algo)
}
static int
+test_perf_armv8_vary_pkt_size(void)
+{
+ unsigned int total_operations = 100000;
+ unsigned int burst_size = { 64 };
+ unsigned int buf_lengths[] = { 64, 128, 256, 512, 768, 1024, 1280, 1536,
+ 1792, 2048 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = HASH_CIPHER,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+ },
+ {
+ .chain = HASH_CIPHER,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+ },
+ };
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ params_set[i].total_operations = total_operations;
+ params_set[i].burst_size = burst_size;
+ printf("\n%s. cipher algo: %s auth algo: %s cipher key size=%u."
+ " burst_size: %d ops\n",
+ chain_mode_name(params_set[i].chain),
+ cipher_algo_name(params_set[i].cipher_algo),
+ auth_algo_name(params_set[i].auth_algo),
+ params_set[i].cipher_key_length,
+ burst_size);
+ printf("\nBuffer Size(B)\tOPS(M)\tThroughput(Gbps)\tRetries\t"
+ "EmptyPolls\n");
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_armv8(testsuite_params.dev_id, 0,
+ ¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int
+test_perf_armv8_vary_burst_size(void)
+{
+ unsigned int total_operations = 4096;
+ uint16_t buf_lengths[] = { 64 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = HASH_CIPHER,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+ },
+ {
+ .chain = HASH_CIPHER,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+ },
+ };
+
+ printf("\n\nStart %s.", __func__);
+ printf("\nThis Test measures the average IA cycle cost using a "
+ "constant request(packet) size. ");
+ printf("Cycle cost is only valid when indicators show device is "
+ "not busy, i.e. Retries and EmptyPolls = 0");
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ printf("\n");
+ params_set[i].total_operations = total_operations;
+
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_armv8_optimise_cyclecount(¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int
test_perf_aes_cbc_vary_burst_size(void)
{
return test_perf_crypto_qp_vary_burst_size(testsuite_params.dev_id);
@@ -4214,6 +4672,19 @@ static int test_continual_perf_AES_GCM(void)
}
};
+static struct unit_test_suite cryptodev_armv8_testsuite = {
+ .suite_name = "Crypto Device ARMv8 Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_armv8_vary_pkt_size),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_armv8_vary_burst_size),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static int
perftest_aesni_gcm_cryptodev(void)
{
@@ -4270,6 +4741,14 @@ static int test_continual_perf_AES_GCM(void)
return unit_test_suite_runner(&cryptodev_qat_continual_testsuite);
}
+static int
+perftest_sw_armv8_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+ gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_ARMV8_PMD;
+
+ return unit_test_suite_runner(&cryptodev_armv8_testsuite);
+}
+
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_perftest,
perftest_aesni_mb_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_perftest, perftest_qat_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_perftest,
perftest_sw_snow3g_cryptodev);
@@ -4279,3 +4758,4 @@ static int test_continual_perf_AES_GCM(void)
perftest_openssl_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_continual_perftest,
perftest_qat_continual_cryptodev);
+REGISTER_TEST_COMMAND(cryptodev_sw_armv8_perftest,
perftest_sw_armv8_cryptodev);
