+ void *hw;
+ int32_t hw_id;
+ uint16_t token;
+
+ uint8_t flags; /*dpaa2 config flags */
+};
+#endif /* _DPAA2_DPNI_H_ */
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 17dfff6..daf59c1 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -43,12 +43,140 @@
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
+#include <rte_dpaa2.h>
+#include <dpaa2_logs.h>
+#include <base/dpaa2_hw_dpni.h>
/* DPDK Interfaces */
#include <dpaa2_ethdev.h>
+static int
+dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
+{
+ struct rte_eth_dev_data *data = dev->data;
+ struct rte_eth_conf *eth_conf = &data->dev_conf;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Check for correct configuration */
+ if (eth_conf->rxmode.mq_mode != ETH_MQ_RX_RSS &&
+ data->nb_rx_queues > 1) {
+ PMD_INIT_LOG(ERR, "Distribution is not enabled, "
+ "but Rx queues more than 1\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+dpaa2_dev_start(struct rte_eth_dev *dev)
+{
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ret = dpni_enable(dpni, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure %d in enabling dpni %d device\n",
+ ret, priv->hw_id);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * This routine disables all traffic on the adapter by issuing a
+ * global reset on the MAC.
+ */
+static void
+dpaa2_dev_stop(struct rte_eth_dev *dev)
+{
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ret = dpni_disable(dpni, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure (ret %d) in disabling dpni %d dev\n",
+ ret, priv->hw_id);
+ return;
+ }
+}
+
+static void
+dpaa2_dev_close(struct rte_eth_dev *dev)
+{
+ struct dpaa2_dev_priv *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpni = (struct fsl_mc_io *)priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Clean the device first */
+ ret = dpni_reset(dpni, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure cleaning dpni device with"
+ " error code %d\n", ret);
+ return;
+ }
+}
+
+static struct eth_dev_ops dpaa2_ethdev_ops = {
+ .dev_configure = dpaa2_eth_dev_configure,
+ .dev_start = dpaa2_dev_start,
+ .dev_stop = dpaa2_dev_stop,
+ .dev_close = dpaa2_dev_close,
+};
+
int
-dpaa2_dev_init(struct rte_eth_dev *eth_dev __rte_unused)
+dpaa2_dev_init(struct rte_eth_dev *eth_dev)
{
+ struct rte_device *dev = eth_dev->device;
+ struct rte_dpaa2_device *dpaa2_dev;
+ struct fsl_mc_io *dpni_dev;
+ struct dpaa2_dev_priv *priv = eth_dev->data->dev_private;
+ int ret, hw_id;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* For secondary processes, the primary has done all the work */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device);
+
+ hw_id = dpaa2_dev->object_id;
+
+ dpni_dev = (struct fsl_mc_io *)malloc(sizeof(struct fsl_mc_io));
+ if (!dpni_dev) {
+ PMD_INIT_LOG(ERR, "malloc failed for dpni device\n");
+ return -1;
+ }
+
+ dpni_dev->regs = mcp_ptr_list[0];
+ ret = dpni_open(dpni_dev, CMD_PRI_LOW, hw_id, &priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure in opening dpni@%d device with"
+ " error code %d\n", hw_id, ret);
+ return -1;
+ }
+
+ /* Clean the device first */
+ ret = dpni_reset(dpni_dev, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure cleaning dpni@%d device with"
+ " error code %d\n", hw_id, ret);
+ return -1;
+ }
