Hi Olga, That was the issue indeed, thank you very much!
Best regards, Georgios On Sat, Dec 17, 2016 at 10:26 PM, Olga Shern <ol...@mellanox.com> wrote: > Hi Georgios, > > Did you install MLNX_OFED? > You probably missing libmlx5-devel package > > Best Regards, > Olga > > -----Original Message----- > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of george....@gmail.com > Sent: Friday, December 16, 2016 4:46 PM > To: Georgios Katsikas <george....@gmail.com>; dev@dpdk.org > Subject: Re: [dpdk-dev] ConnectX4 100GbE - Compilation problem > > Hi all, > > I am coming back to you regarding the Mellanox Connectx4 100Gbps DPDK > driver. > We exchanged some e-mails last summer and I managed to compile the > DPDK-based Mellanox driver using DPDK 16.07 on top of Ubuntu server > 16.04.01. > > A few days ago, I installed a fresh Ubuntu server 16.04.1 on my machine > and attempted to re-install DPDK. > This time, DPDK does not compile because of the following error: > \== Build drivers/net/mlx5 > CC mlx5.o > In file included from /opt/dpdk/drivers/net/mlx5/mlx5.h:67:0, > from /opt/dpdk/drivers/net/mlx5/mlx5.c:66: > /opt/dpdk/drivers/net/mlx5/mlx5_rxtx.h:46:32: fatal error: > infiniband/mlx5_hw.h: No such file or directory compilation terminated. > /opt/dpdk/mk/internal/rte.compile-pre.mk:138: recipe for target 'mlx5.o' > failed > make[6]: *** [mlx5.o] Error 1 > /opt/dpdk/mk/rte.subdir.mk:61: recipe for target 'mlx5' failed > make[5]: *** [mlx5] Error 2 > /opt/dpdk/mk/rte.subdir.mk:61: recipe for target 'net' failed > make[4]: *** [net] Error 2 > /opt/dpdk/mk/rte.sdkbuild.mk:78: recipe for target 'drivers' failed > make[3]: *** [drivers] Error 2 > /opt/dpdk/mk/rte.sdkroot.mk:126: recipe for target 'all' failed > make[2]: *** [all] Error 2 > /opt/dpdk/mk/rte.sdkinstall.mk:85: recipe for target 'pre_install' failed > make[1]: *** [pre_install] Error 2 > /opt/dpdk/mk/rte.sdkroot.mk:101: recipe for target 'install' failed > make: *** [install] Error 2 > [ ERROR] [ CheckStatus] Command make install failed > > I tried 2 different kernels (4.4 and 4.8) both compiled from sources and I > also tried 3 different DPDk versions (16.04/07/11) but they all get stuck > to this point. > The way I configure DPDK is via config/common_base, where I set > CONFIG_RTE_LIBRTE_MLX5_PMD=y. > The file infiniband/mlx5_hw.h does not exist in my system although I have > installed libmlx5. > > Do you know why does this happen now? > > Thanks in advance and best regards, > Georgios > > On Thu, Aug 18, 2016 at 7:35 PM, <george....@gmail.com> wrote: > > > Hi Adrien, > > > > Thanks for the prompt reply! > > You are right, I didn't go via the DPDK route, in the hope that > > Mellanox will provide the exact source and configuration. > > DPDK 16.07 from dpdk.org works like a charm and my NIC is in PMD mode, > > thanks a lot for your guidance! > > > > Best regards, > > Georgios > > > > On Thu, Aug 18, 2016 at 6:05 PM, Adrien Mazarguil < > > adrien.mazarg...@6wind.com> wrote: > > > >> Hi George, > >> > >> On Thu, Aug 18, 2016 at 05:41:38PM +0200, george....@gmail.com wrote: > >> > Hi, > >> > > >> > I have a single port Mellanox ConnectX 4 100GbE NIC and I want to > >> > test > >> its > >> > Rx/Tx capabilites using DPDK. > >> > My system runs a Linux kernel 4.4 compiled from sources. > >> > > >> > I found the PMD driver for this NIC as provided by Mellanox here > >> > <http://www.mellanox.com/page/products_dyn?product_family=20 > >> 9&mtag=pmd_for_dpdk> > >> > . > >> > Following this > >> > <http://www.mellanox.com/related-docs/prod_software/MLNX_ > >> DPDK_Quick_Start_Guide_v2.2_2.7.pdf> > >> > guideline, I put my NIC in Ethernet mode, configured the 3 options > >> > regarding mlx5 in the config/common_linuxapp file and applied 'make > >> install > >> > T=x86_64-native-linuxapp-gcc'. > >> > >> Please note this is a third party package maintained by Mellanox, > >> therefore this mailing list is not the right place to discuss related > >> errors, unless they can be reproduced with a version downloaded from > >> dpdk.org. > >> > >> > Then, I stumbled upon a compilation problem in the mlx4 module. > >> > The compiler's output is as follows: > >> > > >> > == Build drivers/net/mlx4 > >> > CC mlx4.o > >> > In file included from /usr/include/linux/if.h:31:0, > >> > from /opt/MLNX_DPDK_2.2_2.7/drivers > >> /net/mlx4/mlx4.c:57: > >> > /usr/include/linux/hdlc/ioctl.h:73:14: error: ‘IFNAMSIZ’ undeclared > >> here > >> > (not in a function) > >> > char master[IFNAMSIZ]; /* Name of master FRAD device */ > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:612:53: error: > >> > ‘struct ifreq’ declared inside parameter list [-Werror] > >> > priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr) > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:612:53: error: its > >> scope is > >> > only this definition or declaration, which is probably not what you > >> > want [-Werror] > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> ‘priv_ifreq’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:619:32: error: > >> dereferencing > >> > pointer to incomplete type ‘struct ifreq’ > >> > if (priv_get_ifname(priv, &ifr->ifr_name) == 0) > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> ‘rxq_setup’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:3735:29: error: > >> > unused parameter ‘inactive’ [-Werror=unused-parameter] > >> > unsigned int socket, int inactive, const struct rte_eth_rxconf > >> *conf, > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> > ‘mlx4_link_update_unlocked’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4712:15: error: > >> > storage > >> size > >> > of ‘ifr’ isn’t known > >> > struct ifreq ifr; > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4724:43: error: > ‘IFF_UP’ > >> > undeclared (first use in this function) > >> > dev_link.link_status = ((ifr.ifr_flags & IFF_UP) && > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4724:43: note: each > >> > undeclared identifier is reported only once for each function it > >> appears in > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4725:22: error: > >> > ‘IFF_RUNNING’ undeclared (first use in this function) > >> > (ifr.ifr_flags & IFF_RUNNING)); > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4712:15: error: > >> > unused variable ‘ifr’ [-Werror=unused-variable] > >> > struct ifreq ifr; > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> > ‘mlx4_dev_get_flow_ctrl’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4880:15: error: > >> > storage > >> size > >> > of ‘ifr’ isn’t known > >> > struct ifreq ifr; > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4880:15: error: > >> > unused variable ‘ifr’ [-Werror=unused-variable] > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> > ‘mlx4_dev_set_flow_ctrl’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4930:15: error: > >> > storage > >> size > >> > of ‘ifr’ isn’t known > >> > struct ifreq ifr; > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:4930:15: error: > >> > unused variable ‘ifr’ [-Werror=unused-variable] > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> ‘priv_get_mac’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:5184:15: error: > >> > storage > >> size > >> > of ‘request’ isn’t known > >> > struct ifreq request; > >> > ^ > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:5184:15: error: > >> > unused variable ‘request’ [-Werror=unused-variable] > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c: In function > >> > ‘mlx4_pci_devinit’: > >> > /opt/MLNX_DPDK_2.2_2.7/drivers/net/mlx4/mlx4.c:5725:25: error: > ‘IFF_UP’ > >> > undeclared (first use in this function) > >> > priv_set_flags(priv, ~IFF_UP, IFF_UP); > >> > ^ > >> > cc1: all warnings being treated as errors > >> > /opt/MLNX_DPDK_2.2_2.7/mk/internal/rte.compile-pre.mk:126: recipe > >> > for target 'mlx4.o' failed > >> > > >> > Iwould appreciate any suggestions and guidance. > >> > >> Well fortunately these errors are also present in v2.2.0 and should > >> have been addressed since v16.07 by the following commit: > >> > >> http://dpdk.org/browse/dpdk/commit/?id=d06c608c013c36711e7a > >> 693b3fece68a93ae4369 > >> > >> You can either upgrade to v16.07, back-port this commit yourself or > >> wait for an update from Mellanox. > >> > >> -- > >> Adrien Mazarguil > >> 6WIND > >> > > > > > > > > -- > > Georgios Katsikas > > Ph.D. Student and Research Assistant > > Network Systems Lab (NSL) > > > > > > > > *E-Mail:* george <george.katsi...@imdea.org>.d...@gmail.com > > *Web Site:* http://www.di.uoa.gr/~katsikas/ > > <http://people.networks.imdea.org/~george_katsikas/index.html> > > > > > > -- > Georgios Katsikas > Ph.D. Student and Research Assistant > Network Systems Lab (NSL) > > > > *E-Mail:* george <george.katsi...@imdea.org>.d...@gmail.com > *Web Site:* http://www.di.uoa.gr/~katsikas/ < > http://people.networks.imdea.org/~george_katsikas/index.html> > -- Georgios Katsikas Ph.D. Student and Research Assistant Network Systems Lab (NSL) *E-Mail:* george <george.katsi...@imdea.org>.d...@gmail.com *Web Site:* http://www.di.uoa.gr/~katsikas/ <http://people.networks.imdea.org/~george_katsikas/index.html>
