This patch adds support to get the LED link active via the LEDCTL
register. If the LEDCTL register does not have LED link active
(LED mode field = 0x0100) set then default LED link active returned.
LED link active is used for adapter identify/blink support.
Signed-off-by: Wei Dai <wei....@intel.com>
---
drivers/net/ixgbe/base/ixgbe_common.c | 45 +++++++++++++++++++++++++++++++++++
drivers/net/ixgbe/base/ixgbe_common.h | 1 +
drivers/net/ixgbe/base/ixgbe_type.h | 2 ++
3 files changed, 48 insertions(+)
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c
b/drivers/net/ixgbe/base/ixgbe_common.c
index a6016dc..89b4b5f 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -113,6 +113,7 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
mac->ops.led_off = ixgbe_led_off_generic;
mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+ mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic;
/* RAR, Multicast, VLAN */
mac->ops.set_rar = ixgbe_set_rar_generic;
@@ -497,6 +498,9 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
status = hw->mac.ops.start_hw(hw);
}
+ /* Initialize the LED link active for LED blink support */
+ hw->mac.ops.init_led_link_act(hw);
+
return status;
}
@@ -1136,6 +1140,47 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ * @hw: pointer to hardware structure
+ *
+ * Store the index for the link active LED. This will be used to support
+ * blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u32 led_reg, led_mode;
+ u16 i;
+
+ led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* Get LED link active from the LEDCTL register */
+ for (i = 0; i < 4; i++) {
+ led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+ if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+ IXGBE_LED_LINK_ACTIVE) {
+ mac->led_link_act = i;
+ return IXGBE_SUCCESS;
+ }
+ }
+
+ /*
+ * If LEDCTL register does not have the LED link active set, then use
+ * known MAC defaults.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_X550EM_x:
+ mac->led_link_act = 1;
+ break;
+ default:
+ mac->led_link_act = 2;
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
* ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn on
diff --git a/drivers/net/ixgbe/base/ixgbe_common.h
b/drivers/net/ixgbe/base/ixgbe_common.h
index ae28206..93e80ea 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.h
+++ b/drivers/net/ixgbe/base/ixgbe_common.h
@@ -72,6 +72,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw);
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
b/drivers/net/ixgbe/base/ixgbe_type.h
index 5b2506a..b90ae6d 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -3886,6 +3886,7 @@ struct ixgbe_mac_operations {
s32 (*led_off)(struct ixgbe_hw *, u32);
s32 (*blink_led_start)(struct ixgbe_hw *, u32);
s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+ s32 (*init_led_link_act)(struct ixgbe_hw *);
/* RAR, Multicast, VLAN */
s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
@@ -4029,6 +4030,7 @@ struct ixgbe_mac_info {
struct ixgbe_dmac_config dmac_config;
bool set_lben;
u32 max_link_up_time;
+ u8 led_link_act;
};
struct ixgbe_phy_info {
--
2.7.4
