On Mon, Sep 26, 2016 at 2:33 PM, Mcnamara, John <john.mcnamara at intel.com> wrote:
> > -----Original Message----- > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Ajit Khaparde > > Sent: Monday, September 26, 2016 5:19 PM > > To: dev at dpdk.org > > Subject: [dpdk-dev] [v2 04/15] bnxt: Update Broadcom PMD driver > > documentation > > > > Update doc/guides/nics/bnxt.rst to indicate that the bnxt PMD driver > > supports Broadcom NetXtreme-C/NetXtreme-E BCM5730X/BCM5740X family of > > network controllers and Broadcom StrataGX BCM5871X family of > > communications processors. > > > > Signed-off-by: Ajit Khaparde <ajit.khaparde at broadcom.com> > > --- > > doc/guides/nics/bnxt.rst | 23 +++++++++++++++++------ > > 1 file changed, 17 insertions(+), 6 deletions(-) > > > > diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst index > > 2669e98..cf7fca8 100644 > > --- a/doc/guides/nics/bnxt.rst > > +++ b/doc/guides/nics/bnxt.rst > > @@ -30,13 +30,24 @@ > > bnxt poll mode driver library > > ============================= > > > > -The bnxt poll mode library (**librte_pmd_bnxt**) implements support for > - > > **Broadcom NetXtreme(r) C-Series**. These adapters support Standards- - > > compliant 10/25/50Gbps 30MPPS full-duplex throughput. > > - > > -Information about this family of adapters can be found in the > > +The bnxt poll mode library (**librte_pmd_bnxt**) implements support for: > > +**Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of > > +Ethernet Network Controllers**. These adapters support Standards > > +compliant 10/25/50Gbps 30MPPS full-duplex throughput. > > +**Broadcom StrataGX(r) BCM5871X Series of Communucations Processors** > > +These ARM based processors target a broad range of networking > > +applications including virtual CPE (vCPE) and NFV appliances, 10G > > +service routers and gateways, control plane processing for Ethernet > > +switches and network attached storage (NAS). > > + > > +Information about the NetXtreme family of adapters can be found in the > > `NetXtreme(r) Brand section <https://www.broadcom.com/ > products/ethernet- > > communication-and-switching?technology%5B%5D=88>`_ > > -of the `Broadcom web site <http://www.broadcom.com/>`_. > > +of the `Broadcom website <http://www.broadcom.com/>`_. > > + > > +Information about the StrataGX family of adapters can be found in the > > +`StrataGX(r) BCM5871X Series section > > +<http://www.broadcom.com/products/enterprise-and-network-processors/pro > > +cessors/bcm58712>`_ of the `Broadcom website > > +<http://www.broadcom.com/>`_. > > Hi, > > There is a full stop missing before "These ARM ...". > > Reformatting the text as follows would looks better in the rendered output: > ?Do you want me to resend the patch (series). Or you can manage it w/o that? ? > > > The bnxt poll mode library (**librte_pmd_bnxt**) implements support for: > > * **Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of > Ethernet Network Controllers**: These adapters support Standards > compliant > 10/25/50Gbps 30MPPS full-duplex throughput. > > Information about the NetXtreme family of adapters can be found in the > `NetXtreme(r) Brand section > <https://www.broadcom.com/products/ethernet-communication-and-switching? > technology%5B%5D=88>`_ > of the `Broadcom website <http://www.broadcom.com/>`_. > > * **Broadcom StrataGX(r) BCM5871X Series of Communucations Processors**: > These > ARM based processors target a broad range of networking applications > including virtual CPE (vCPE) and NFV appliances, 10G service routers and > gateways, control plane processing for Ethernet switches and network > attached storage (NAS). > > Information about the StrataGX family of adapters can be found in the > `StrataGX(r) BCM5871X Series section > <http://www.broadcom.com/products/enterprise-and- > network-processors/processors/bcm58712>`_ > of the `Broadcom website <http://www.broadcom.com/>`_. > > P.S. Could you mark the V1 version as "superseded" in PatchWork. > ?Sure. ? > > Regards, > > John >
