On Tue, Sep 06, 2016 at 09:42:38AM +0000, Xu, Qian Q wrote:
> Another interesting thing to me is the ZERO-COPY settings. If I have 2 vhost,
> and 1 is set as
> Zero-copy=0, and another is set zero-copy=1, so the vhost will take it as
> Zero-copy
> Enabled for all vhost, or for one vhost.
The flag is per vhost-user socket file path.
If you have two vhost interfaces attached on the same socket files
(when it acts as the server), the two vhost interface will both
with zero copy enabled.
If the two vhost interfaces are attached on different socket file,
zero-copy will be only enabled when the option is given for
corresponding socket file.
> Does the vhost allow such usage? Or we need
Yes, it's allowd.
> Enforce all vhost zero-copy to be a same number.
Nope.
--yliu
>
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Xu, Qian Q
> Sent: Tuesday, September 06, 2016 5:00 PM
> To: Yuanhan Liu; dev at dpdk.org
> Cc: Maxime Coquelin
> Subject: Re: [dpdk-dev] [PATCH 5/6] vhost: add a flag to enable Tx zero copy
>
> Just curious about the naming: vhost USER TX Zero copy. In fact, it's Vhost
> RX zero-copy
> For virtio, it's Virtio TX zero-copy. So, I wonder why we call it as Vhost TX
> ZERO-COPY,
> Any comments?
>
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Yuanhan Liu
> Sent: Tuesday, August 23, 2016 4:11 PM
> To: dev at dpdk.org
> Cc: Maxime Coquelin; Yuanhan Liu
> Subject: [dpdk-dev] [PATCH 5/6] vhost: add a flag to enable Tx zero copy
>
> Add a new flag ``RTE_VHOST_USER_TX_ZERO_COPY`` to explictily enable
> Tx zero copy. If not given, Tx zero copy is disabled by default.
>
> Signed-off-by: Yuanhan Liu <yuanhan.liu at linux.intel.com>
> ---
> doc/guides/prog_guide/vhost_lib.rst | 7 ++++++-
> lib/librte_vhost/rte_virtio_net.h | 1 +
> lib/librte_vhost/socket.c | 5 +++++
> lib/librte_vhost/vhost.c | 10 ++++++++++
> lib/librte_vhost/vhost.h | 1 +
> 5 files changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/prog_guide/vhost_lib.rst
> b/doc/guides/prog_guide/vhost_lib.rst
> index 6b0c6b2..15c2bf7 100644
> --- a/doc/guides/prog_guide/vhost_lib.rst
> +++ b/doc/guides/prog_guide/vhost_lib.rst
> @@ -79,7 +79,7 @@ The following is an overview of the Vhost API functions:
> ``/dev/path`` character device file will be created. For vhost-user server
> mode, a Unix domain socket file ``path`` will be created.
>
> - Currently two flags are supported (these are valid for vhost-user only):
> + Currently supported flags are (these are valid for vhost-user only):
>
> - ``RTE_VHOST_USER_CLIENT``
>
> @@ -97,6 +97,11 @@ The following is an overview of the Vhost API functions:
> This reconnect option is enabled by default. However, it can be turned
> off
> by setting this flag.
>
> + - ``RTE_VHOST_USER_TX_ZERO_COPY``
> +
> + Tx zero copy will be enabled when this flag is set. It is disabled by
> + default.
> +
> * ``rte_vhost_driver_session_start()``
>
> This function starts the vhost session loop to handle vhost messages. It
> diff --git a/lib/librte_vhost/rte_virtio_net.h
> b/lib/librte_vhost/rte_virtio_net.h
> index 9caa622..5e437c6 100644
> --- a/lib/librte_vhost/rte_virtio_net.h
> +++ b/lib/librte_vhost/rte_virtio_net.h
> @@ -53,6 +53,7 @@
>
> #define RTE_VHOST_USER_CLIENT (1ULL << 0)
> #define RTE_VHOST_USER_NO_RECONNECT (1ULL << 1)
> +#define RTE_VHOST_USER_TX_ZERO_COPY (1ULL << 2)
>
> /* Enum for virtqueue management. */
> enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
> diff --git a/lib/librte_vhost/socket.c b/lib/librte_vhost/socket.c
> index bf03f84..5c3962d 100644
> --- a/lib/librte_vhost/socket.c
> +++ b/lib/librte_vhost/socket.c
> @@ -62,6 +62,7 @@ struct vhost_user_socket {
> int connfd;
> bool is_server;
> bool reconnect;
> + bool tx_zero_copy;
> };
>
> struct vhost_user_connection {
> @@ -203,6 +204,9 @@ vhost_user_add_connection(int fd, struct
> vhost_user_socket *vsocket)
> size = strnlen(vsocket->path, PATH_MAX);
> vhost_set_ifname(vid, vsocket->path, size);
>
> + if (vsocket->tx_zero_copy)
> + vhost_enable_tx_zero_copy(vid);
> +
> RTE_LOG(INFO, VHOST_CONFIG, "new device, handle is %d\n", vid);
>
> vsocket->connfd = fd;
> @@ -499,6 +503,7 @@ rte_vhost_driver_register(const char *path, uint64_t
> flags)
> memset(vsocket, 0, sizeof(struct vhost_user_socket));
> vsocket->path = strdup(path);
> vsocket->connfd = -1;
> + vsocket->tx_zero_copy = flags & RTE_VHOST_USER_TX_ZERO_COPY;
>
> if ((flags & RTE_VHOST_USER_CLIENT) != 0) {
> vsocket->reconnect = !(flags & RTE_VHOST_USER_NO_RECONNECT);
> diff --git a/lib/librte_vhost/vhost.c b/lib/librte_vhost/vhost.c
> index ab25649..5461e5b 100644
> --- a/lib/librte_vhost/vhost.c
> +++ b/lib/librte_vhost/vhost.c
> @@ -290,6 +290,16 @@ vhost_set_ifname(int vid, const char *if_name, unsigned
> int if_len)
> dev->ifname[sizeof(dev->ifname) - 1] = '\0';
> }
>
> +void
> +vhost_enable_tx_zero_copy(int vid)
> +{
> + struct virtio_net *dev = get_device(vid);
> +
> + if (dev == NULL)
> + return;
> +
> + dev->tx_zero_copy = 1;
> +}
>
> int
> rte_vhost_get_numa_node(int vid)
> diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
> index 718133e..3081180 100644
> --- a/lib/librte_vhost/vhost.h
> +++ b/lib/librte_vhost/vhost.h
> @@ -279,6 +279,7 @@ void vhost_destroy_device(int);
> int alloc_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx);
>
> void vhost_set_ifname(int, const char *if_name, unsigned int if_len);
> +void vhost_enable_tx_zero_copy(int vid);
>
> /*
> * Backend-specific cleanup. Defined by vhost-cuse and vhost-user.
> --
> 1.9.0
