> -----Original Message-----
> From: Aaron Conole [mailto:aconole at redhat.com]
> Sent: Friday, February 26, 2016 2:49 AM
> To: dev at dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Zhang, Helin
> <helin.zhang at intel.com>; Ananyev, Konstantin
> <konstantin.ananyev at intel.com>; Richardson, Bruce
> <bruce.richardson at intel.com>
> Subject: [PATCH 3/8] drivers/net/e1000: Fix missing brackets
>
> The register read/write mphy functions have misleading whitespace around the
> locked check. This cleanup merely preserves the existing functionality while
> improving the ready check.
>
> Signed-off-by: Aaron Conole <aconole at redhat.com>
> ---
> drivers/net/e1000/base/e1000_phy.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/e1000/base/e1000_phy.c
> b/drivers/net/e1000/base/e1000_phy.c
> index d43b7ce..8642d38 100644
> --- a/drivers/net/e1000/base/e1000_phy.c
> +++ b/drivers/net/e1000/base/e1000_phy.c
> @@ -4153,13 +4153,13 @@ s32 e1000_read_phy_reg_mphy(struct e1000_hw
> *hw, u32 address, u32 *data)
> *data = E1000_READ_REG(hw, E1000_MPHY_DATA);
>
> /* Disable access to mPHY if it was originally disabled */
> - if (locked)
> + if (locked) {
> ready = e1000_is_mphy_ready(hw);
> if (!ready)
> return -E1000_ERR_PHY;
> - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
> - E1000_MPHY_DIS_ACCESS);
> + }
>
> + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
> E1000_MPHY_DIS_ACCESS);
I think the above line should be included in brackets above.
Though we should avoid modifying any code in base driver, I'd
suggest you to fix the issue here. Thank you!
> return E1000_SUCCESS;
> }
>
> @@ -4218,13 +4218,13 @@ s32 e1000_write_phy_reg_mphy(struct e1000_hw
> *hw, u32 address, u32 data,
> E1000_WRITE_REG(hw, E1000_MPHY_DATA, data);
>
> /* Disable access to mPHY if it was originally disabled */
> - if (locked)
> + if (locked) {
> ready = e1000_is_mphy_ready(hw);
> if (!ready)
> return -E1000_ERR_PHY;
> - E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
> - E1000_MPHY_DIS_ACCESS);
> + }
>
> + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL,
> E1000_MPHY_DIS_ACCESS);
> return E1000_SUCCESS;
The same comments as above. Thanks!
> }
>
> --
> 2.5.0
