Hi Michael,
> -----Original Message-----
> From: Qiu, Michael
> Sent: Thursday, March 3, 2016 2:58 PM
> To: Lu, Wenzhuo; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/4] ixgbe: support UDP tunnel add/del
>
> On 1/11/2016 3:08 PM, Wenzhuo Lu wrote:
> > Add UDP tunnel add/del support on ixgbe. Now it only support VxLAN
> > port configuration.
> > Although the VxLAN port has a default value 4789, it can be changed.
> > We support VxLAN port configuration to meet the change.
> > Note, the default value of VxLAN port in ixgbe NICs is 0. So please
> > set it when using VxLAN off-load.
> >
> > Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> > ---
> > drivers/net/ixgbe/ixgbe_ethdev.c | 93
> > ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 93 insertions(+)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > index 4c4c6df..381cbad 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > @@ -337,6 +337,10 @@ static int ixgbe_timesync_read_time(struct
> rte_eth_dev *dev,
> > struct timespec *timestamp);
> > static int ixgbe_timesync_write_time(struct rte_eth_dev *dev,
> > const struct timespec *timestamp);
> > +static int ixgbe_dev_udp_tunnel_add(struct rte_eth_dev *dev,
> > + struct rte_eth_udp_tunnel *udp_tunnel);
> static int
> > +ixgbe_dev_udp_tunnel_del(struct rte_eth_dev *dev,
> > + struct rte_eth_udp_tunnel *udp_tunnel);
> >
> > /*
> > * Define VF Stats MACRO for Non "cleared on read" register @@ -495,6
> > +499,8 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = {
> > .timesync_adjust_time = ixgbe_timesync_adjust_time,
> > .timesync_read_time = ixgbe_timesync_read_time,
> > .timesync_write_time = ixgbe_timesync_write_time,
> > + .udp_tunnel_add = ixgbe_dev_udp_tunnel_add,
> > + .udp_tunnel_del = ixgbe_dev_udp_tunnel_del,
> > };
> >
> > /*
> > @@ -6191,6 +6197,93 @@ ixgbe_dev_get_dcb_info(struct rte_eth_dev *dev,
> > return 0;
> > }
> >
> > +#define DEFAULT_VXLAN_PORT 4789
> > +
> > +/* on x550, there's only one register for VxLAN UDP port.
> > + * So, we cannot add or del the port. We only update it.
> > + */
> > +static int
> > +ixgbe_update_vxlan_port(struct ixgbe_hw *hw,
> > + uint16_t port)
> > +{
> > + IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, port);
> > + IXGBE_WRITE_FLUSH(hw);
> > +
> > + return 0;
> > +}
> > +
> > +/* Add UDP tunneling port */
> > +static int
> > +ixgbe_dev_udp_tunnel_add(struct rte_eth_dev *dev,
> > + struct rte_eth_udp_tunnel *udp_tunnel) {
> > + int ret = 0;
> > + struct ixgbe_hw *hw =
> > +IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > +
> > + if (hw->mac.type != ixgbe_mac_X550 &&
> > + hw->mac.type != ixgbe_mac_X550EM_x) {
> > + return -ENOTSUP;
> > + }
> > +
> > + if (udp_tunnel == NULL)
> > + return -EINVAL;
> > +
> > + switch (udp_tunnel->prot_type) {
> > + case RTE_TUNNEL_TYPE_VXLAN:
> > + /* cannot add a port, update the port value */
> > + ret = ixgbe_update_vxlan_port(hw, udp_tunnel->udp_port);
> > + break;
> > +
> > + case RTE_TUNNEL_TYPE_GENEVE:
> > + case RTE_TUNNEL_TYPE_TEREDO:
> > + PMD_DRV_LOG(ERR, "Tunnel type is not supported now.");
> > + ret = -1;
> > + break;
> > +
> > + default:
> > + PMD_DRV_LOG(ERR, "Invalid tunnel type");
> > + ret = -1;
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/* Remove UDP tunneling port */
> > +static int
> > +ixgbe_dev_udp_tunnel_del(struct rte_eth_dev *dev,
> > + struct rte_eth_udp_tunnel *udp_tunnel) {
> > + int ret = 0;
> > + struct ixgbe_hw *hw =
> > +IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > +
> > + if (hw->mac.type != ixgbe_mac_X550 &&
> > + hw->mac.type != ixgbe_mac_X550EM_x) {
> > + return -ENOTSUP;
> > + }
> > +
> > + if (udp_tunnel == NULL)
> > + return -EINVAL;
> > +
> > + switch (udp_tunnel->prot_type) {
> > + case RTE_TUNNEL_TYPE_VXLAN:
> > + /* cannot del the port, reset it to default */
> > + ret = ixgbe_update_vxlan_port(hw, DEFAULT_VXLAN_PORT);
> > + break;
> > + case RTE_TUNNEL_TYPE_GENEVE:
> > + case RTE_TUNNEL_TYPE_TEREDO:
> > + PMD_DRV_LOG(ERR, "Tunnel type is not supported now.");
> > + ret = -1;
>
> Better to use the -EINVAL or other, mixed style always not good.
Good suggestion, thanks. I'll change it.
>
> Thanks,
> Michael
> > + break;
> > + default:
> > + PMD_DRV_LOG(ERR, "Invalid tunnel type");
> > + ret = -1;
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > static struct rte_driver rte_ixgbe_driver = {
> > .type = PMD_PDEV,
> > .init = rte_ixgbe_pmd_init,
