Sorry, there was a typo in Huawei's mail, I copy-pasted it from the
other thread "[dpdk-dev] virtio PMD issue".
On 07/18/2016 06:06 PM, Olivier Matz wrote:
> Hi,
>
> On 16.07-rc3, when I start testpmd with a virtio driver in a VM,
> requesting options that are not implemented (rx checksum), it crashes:
>
> ./build/app/testpmd -l 0,1 --log-level 8 -- --total-num-mbufs=16384 -i
> --port-topology=chained --disable-hw-vlan-filter --disable-hw-vlan-strip
> --enable-rx-cksum --crc-strip --txqflags=0
> EAL: Detected 3 lcore(s)
> EAL: Probing VFIO support...
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
> unreliable clock cycles !
> PMD: bnxt_rte_pmd_init() called for (null)
> EAL: PCI device 0000:00:02.0 on NUMA socket -1
> EAL: probe driver: 8086:10fb rte_ixgbe_pmd
> EAL: PCI device 0000:00:04.0 on NUMA socket -1
> EAL: probe driver: 8086:10fb rte_ixgbe_pmd
> EAL: PCI device 0000:00:05.0 on NUMA socket -1
> EAL: probe driver: 1af4:1000 rte_virtio_pmd
> PMD: virtio_read_caps(): no modern virtio pci device found.
> PMD: vtpci_init(): trying with legacy virtio pci.
> Interactive-mode selected
> USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=16384, size=2176,
> socket=0
> Configuring Port 0 (socket 0)
> Port 0: 00:1B:21:AB:8F:10
> Configuring Port 1 (socket 0)
> Segmentation fault
>
>
> The crash occurs here (rxvq is NULL):
>
> void
> virtio_dev_rx_queue_release(void *rxq)
> {
> struct virtnet_rx *rxvq = rxq;
> => struct virtqueue *vq = rxvq->vq;
> /* rxvq is freed when vq is freed, and as mz should be freed
> after the
> * del_queue, so we reserve the mz pointer first.
>
> */
> const struct rte_memzone *mz = rxvq->mz;
>
>
> Here is the backtrace:
>
> #0 0x0000000000b01744 in virtio_dev_rx_queue_release (rxq=0x0) at
> /root/dpdk.org/drivers/net/virtio/virtio_rxtx.\
> c:470
> #1 0x0000000000583783 in rte_eth_dev_rx_queue_config (dev=0x10ac700
> <rte_eth_devices+16512>, nb_queues=0) at /ro\
> ot/dpdk.org/lib/librte_ether/rte_ethdev.c:713
> #2 0x00000000005840e1 in rte_eth_dev_configure (port_id=1 '\001',
> nb_rx_q=1, nb_tx_q=1, dev_conf=0x7fffd41a3838)\
> at /root/dpdk.org/lib/librte_ether/rte_ethdev.c:1027
> #3 0x0000000000440037 in start_port (pid=255 '\377') at
> /root/dpdk.org/app/test-pmd/testpmd.c:1338
> #4 0x00000000004419d9 in main (argc=9, argv=0x7fffffffe630) at
> /root/dpdk.org/app/test-pmd/testpmd.c:2114
>
>
> Actually, virtio_dev_configure() returns an error here:
>
> if (rxmode->hw_ip_checksum) {
> PMD_DRV_LOG(ERR, "HW IP checksum not supported");
> => return -EINVAL;
> }
>
>
> Then, rte_eth_dev_configure() tries to do some cleanup and crashes here:
>
> diag = (*dev->dev_ops->dev_configure)(dev);
> if (diag != 0) {
> RTE_PMD_DEBUG_TRACE("port%d dev_configure = %d\n",
> port_id, diag);
> => rte_eth_dev_rx_queue_config(dev, 0);
> rte_eth_dev_tx_queue_config(dev, 0);
> return diag;
> }
>
>
> I suppose it is related to this commit:
> http://dpdk.org/browse/dpdk/commit/?id=01ad44fd374fb8ecb9ecc80b9bfd1f45dbaa4a1f
>
>
> Sorry, I have not a lot of time to investigate further, hope you can
> find the appropriate fix with the info above.
>
>
> Regards,
> Olivier
>
