Hi Tao,
Sorry hit send button too early by accident :)
> >
> > Problem:
> > When using the TSO + VXLAN feature in i40e, the outer UDP length fields in
> > the multiple UDP segments which are TSOed by the i40e will have the
> > wrong value.
> >
> > Fix this problem by adding the tunnel type field in the i40e descriptor
> > which was missed before.
> >
> > Fixes: 77b8301733c3 ("i40e: VXLAN Tx checksum offload")
> >
> > Signed-off-by: Zhe Tao <zhe.tao at intel.com>
> > ---
> > V2: Edited some comments for mbuf structure and i40e driver.
> >
> > app/test-pmd/csumonly.c | 26 +++++++++++++++++++-------
> > drivers/net/i40e/i40e_rxtx.c | 12 +++++++++---
> > lib/librte_mbuf/rte_mbuf.h | 16 +++++++++++++++-
> > 3 files changed, 43 insertions(+), 11 deletions(-)
> >
> > diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
> > index ac4bd8f..d423c20 100644
> > --- a/app/test-pmd/csumonly.c
> > +++ b/app/test-pmd/csumonly.c
> > @@ -204,7 +204,8 @@ parse_ethernet(struct ether_hdr *eth_hdr, struct
> > testpmd_offload_info *info)
> > static void
> > parse_vxlan(struct udp_hdr *udp_hdr,
> > struct testpmd_offload_info *info,
> > - uint32_t pkt_type)
> > + uint32_t pkt_type,
> > + uint64_t *ol_flags)
> > {
> > struct ether_hdr *eth_hdr;
> >
> > @@ -215,6 +216,7 @@ parse_vxlan(struct udp_hdr *udp_hdr,
> > RTE_ETH_IS_TUNNEL_PKT(pkt_type) == 0)
> > return;
> >
> > + *ol_flags |= PKT_TX_TUNNEL_VXLAN;
> > info->is_tunnel = 1;
> > info->outer_ethertype = info->ethertype;
> > info->outer_l2_len = info->l2_len;
> > @@ -231,7 +233,9 @@ parse_vxlan(struct udp_hdr *udp_hdr,
> >
> > /* Parse a gre header */
> > static void
> > -parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info
> > *info)
> > +parse_gre(struct simple_gre_hdr *gre_hdr,
> > + struct testpmd_offload_info *info,
> > + uint64_t *ol_flags)
> > {
> > struct ether_hdr *eth_hdr;
> > struct ipv4_hdr *ipv4_hdr;
> > @@ -242,6 +246,8 @@ parse_gre(struct simple_gre_hdr *gre_hdr, struct
> > testpmd_offload_info *info)
> > if ((gre_hdr->flags & _htons(~GRE_SUPPORTED_FIELDS)) != 0)
> > return;
> >
> > + *ol_flags |= PKT_TX_TUNNEL_GRE;
> > +
> > gre_len += sizeof(struct simple_gre_hdr);
> >
> > if (gre_hdr->flags & _htons(GRE_KEY_PRESENT))
> > @@ -417,7 +423,7 @@ process_inner_cksums(void *l3_hdr, const struct
> > testpmd_offload_info *info,
> > * packet */
> > static uint64_t
> > process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info *info,
> > - uint16_t testpmd_ol_flags)
> > + uint16_t testpmd_ol_flags, uint64_t orig_ol_flags)
> > {
> > struct ipv4_hdr *ipv4_hdr = outer_l3_hdr;
> > struct ipv6_hdr *ipv6_hdr = outer_l3_hdr;
> > @@ -442,6 +448,9 @@ process_outer_cksums(void *outer_l3_hdr, struct
> > testpmd_offload_info *info,
> > * hardware supporting it today, and no API for it. */
> >
> > udp_hdr = (struct udp_hdr *)((char *)outer_l3_hdr + info->outer_l3_len);
> > + if ((orig_ol_flags & PKT_TX_TCP_SEG) &&
> > + ((orig_ol_flags & PKT_TX_TUNNEL_MASK) == PKT_TX_TUNNEL_VXLAN))
> > + udp_hdr->dgram_cksum = 0;
> > /* do not recalculate udp cksum if it was 0 */
> > if (udp_hdr->dgram_cksum != 0) {
> > udp_hdr->dgram_cksum = 0;
> > @@ -705,15 +714,18 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
> > if (info.l4_proto == IPPROTO_UDP) {
> > struct udp_hdr *udp_hdr;
> > udp_hdr = (struct udp_hdr *)((char *)l3_hdr +
> > - info.l3_len);
> > - parse_vxlan(udp_hdr, &info, m->packet_type);
> > + info.l3_len);
> > + parse_vxlan(udp_hdr, &info, m->packet_type,
> > + &ol_flags);
> > } else if (info.l4_proto == IPPROTO_GRE) {
> > struct simple_gre_hdr *gre_hdr;
> > gre_hdr = (struct simple_gre_hdr *)
> > ((char *)l3_hdr + info.l3_len);
> > - parse_gre(gre_hdr, &info);
> > + parse_gre(gre_hdr, &info, &ol_flags);
> > } else if (info.l4_proto == IPPROTO_IPIP) {
> > void *encap_ip_hdr;
> > +
> > + ol_flags |= PKT_TX_TUNNEL_IPIP;
> > encap_ip_hdr = (char *)l3_hdr + info.l3_len;
> > parse_encap_ip(encap_ip_hdr, &info);
> > }
> > @@ -745,7 +757,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
> > * processed in hardware. */
> > if (info.is_tunnel == 1) {
> > ol_flags |= process_outer_cksums(outer_l3_hdr, &info,
> > - testpmd_ol_flags);
> > + testpmd_ol_flags, ol_flags);
> > }
> >
> > /* step 4: fill the mbuf meta data (flags and header lengths) */
> > diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
> > index 049a813..4c987f2 100644
> > --- a/drivers/net/i40e/i40e_rxtx.c
> > +++ b/drivers/net/i40e/i40e_rxtx.c
> > @@ -801,6 +801,12 @@ i40e_txd_enable_checksum(uint64_t ol_flags,
> > union i40e_tx_offload tx_offload,
> > uint32_t *cd_tunneling)
> > {
> > + /* Tx pkts tunnel type*/
> > + if ((ol_flags & PKT_TX_TUNNEL_MASK) == PKT_TX_TUNNEL_VXLAN)
> > + *cd_tunneling |= I40E_TXD_CTX_UDP_TUNNELING;
> > + else if ((ol_flags & PKT_TX_TUNNEL_MASK) == PKT_TX_TUNNEL_GRE)
> > + *cd_tunneling |= I40E_TXD_CTX_GRE_TUNNELING;
> > +
As I understand that fix is needed to enable TSO for tunnelling packets,
correct?
For that case, should we setup EIPLEN also, no matter is PKT_TX_OUTER_IP_CKSUM
is on/off?
> > /* UDP tunneling packet TX checksum offload */
> > if (ol_flags & PKT_TX_OUTER_IP_CKSUM) {
> >
> > @@ -1510,7 +1516,8 @@ i40e_calc_context_desc(uint64_t flags)
> >
> > /* set i40e TSO context descriptor */
> > static inline uint64_t
> > -i40e_set_tso_ctx(struct rte_mbuf *mbuf, union i40e_tx_offload tx_offload)
> > +i40e_set_tso_ctx(struct rte_mbuf *mbuf,
> > + union i40e_tx_offload tx_offload)
> > {
> > uint64_t ctx_desc = 0;
> > uint32_t cd_cmd, hdr_len, cd_tso_len;
> > @@ -1521,7 +1528,7 @@ i40e_set_tso_ctx(struct rte_mbuf *mbuf, union
> > i40e_tx_offload tx_offload)
> > }
> >
> > /**
> > - * in case of tunneling packet, the outer_l2_len and
> > + * in case of non tunneling packet, the outer_l2_len and
> > * outer_l3_len must be 0.
> > */
> > hdr_len = tx_offload.outer_l2_len +
> > @@ -1537,7 +1544,6 @@ i40e_set_tso_ctx(struct rte_mbuf *mbuf, union
> > i40e_tx_offload tx_offload)
> > I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) |
> > ((uint64_t)mbuf->tso_segsz <<
> > I40E_TXD_CTX_QW1_MSS_SHIFT);
> > -
> > return ctx_desc;
> > }
> >
> > diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> > index 15e3a10..8eb0d33 100644
> > --- a/lib/librte_mbuf/rte_mbuf.h
> > +++ b/lib/librte_mbuf/rte_mbuf.h
> > @@ -133,6 +133,17 @@ extern "C" {
> > /* add new TX flags here */
> >
> > /**
> > + * Bits 45:48 used for the tunnel type.
> > + * When doing Tx offload like TSO or checksum, the HW needs to configure
> > the
> > + * tunnel type into the HW descriptors.
> > + */
> > +#define PKT_TX_TUNNEL_VXLAN (1ULL << 45)
> > +#define PKT_TX_TUNNEL_GRE (2ULL << 45)
> > +#define PKT_TX_TUNNEL_IPIP (3ULL << 45)
> > +/* add new TX TUNNEL type here */
> > +#define PKT_TX_TUNNEL_MASK (0xFULL << 45)
> > +
> > +/**
> > * Second VLAN insertion (QinQ) flag.
> > */
> > #define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN
> > inserted. */
> > @@ -867,7 +878,10 @@ struct rte_mbuf {
> > union {
> > uint64_t tx_offload; /**< combined for easy fetch */
> > struct {
> > - uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
> > + /* L2 (MAC) Header Length if it is not a tunneling pkt.
> > + * for tunnel it is outer L4 len+tunnel len+inner L2 len
> > + */
As a nit: that doesn't look like doxygen style comment to me.
Konstantin
> > + uint64_t l2_len:7;
> > uint64_t l3_len:9; /**< L3 (IP) Header Length. */
> > uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
> > uint64_t tso_segsz:16; /**< TCP TSO segment size */
> > --
> > 2.1.4
