On Wed, 2016-07-06 at 00:45 +0000, Lu, Wenzhuo wrote: > Hi Luca, > > > -----Original Message----- > > From: Luca Boccassi [mailto:lboccass at Brocade.com] > > Sent: Tuesday, July 5, 2016 5:53 PM > > To: Lu, Wenzhuo > > Cc: dev at dpdk.org > > Subject: Re: [dpdk-dev] [PATCH v6 0/4] support reset of VF link > > > > On Tue, 2016-07-05 at 00:52 +0000, Lu, Wenzhuo wrote: > > > Hi Luca, > > > > > > > > > > -----Original Message----- > > > > From: Luca Boccassi [mailto:lboccass at Brocade.com] > > > > Sent: Monday, July 4, 2016 11:48 PM > > > > To: Lu, Wenzhuo > > > > Cc: dev at dpdk.org > > > > Subject: Re: [dpdk-dev] [PATCH v6 0/4] support reset of VF link > > > > > > > > On Mon, 2016-06-20 at 14:24 +0800, Wenzhuo Lu wrote: > > > > > If the PF link is down and up, VF link will not work accordingly. > > > > > This patch set addes the support of VF link reset. So, when VF > > > > > receices the messges of physical link down/up. APP can reset the > > > > > VF link and let it recover. > > > > > > > > > > PS: This patch set is splitted from a previous patch set, > > > > > *automatic link recovery on ixgbe/igb VF*, and it's base on the > > > > > patch set *support mailbox interruption on ixgbe/igb VF*. > > > > > > > > > > Wenzhuo Lu (3): > > > > > lib/librte_ether: support device reset > > > > > ixgbe: implement device reset on VF > > > > > igb: implement device reset on VF > > > > > > > > > > Zhe Tao (1): > > > > > i40e: implement device reset on VF > > > > > > > > > > v1: > > > > > - Added the implementation for the VF reset functionality. > > > > > v2: > > > > > - Changed the i40e related operations during VF reset. > > > > > v3: > > > > > - Resent the patches because of the mail sent issue. > > > > > v4: > > > > > - Removed some VF reset emulation code. > > > > > v5: > > > > > - Removed all the code related with lock. > > > > > v6: > > > > > - Updated the NIC feature overview matrix. > > > > > - Added more explanation in the doxygen comment of reset API. > > > > > > > > > > doc/guides/nics/overview.rst | 1 + > > > > > doc/guides/rel_notes/release_16_07.rst | 13 ++++++ > > > > > drivers/net/e1000/igb_ethdev.c | 59 ++++++++++++++++++++++++ > > > > > drivers/net/i40e/i40e_ethdev.h | 4 ++ > > > > > drivers/net/i40e/i40e_ethdev_vf.c | 83 > > > > ++++++++++++++++++++++++++++++++++ > > > > > drivers/net/i40e/i40e_rxtx.c | 10 ++++ > > > > > drivers/net/i40e/i40e_rxtx.h | 4 ++ > > > > > drivers/net/ixgbe/ixgbe_ethdev.c | 64 > > > > > +++++++++++++++++++++++++- > > > > > drivers/net/ixgbe/ixgbe_ethdev.h | 2 +- > > > > > drivers/net/ixgbe/ixgbe_rxtx.c | 12 +++-- > > > > > lib/librte_ether/rte_ethdev.c | 17 +++++++ > > > > > lib/librte_ether/rte_ethdev.h | 24 ++++++++++ > > > > > lib/librte_ether/rte_ether_version.map | 7 +++ > > > > > 13 files changed, 295 insertions(+), 5 deletions(-) > > > > > > > > Hello Wenzhuo, > > > > > > > > I'm testing this patchset, but I am sporadically running into an > > > > issue where the VFs reset fails after the PF flaps. > > > > > > > > I have a VM running on a KVM box with a X540-AT2, passing 2 VFs in. > > > > > > > > I am using calling rte_eth_dev_reset in response to a > > > > RTE_ETH_EVENT_INTR_RESET callback, and the following errors appear > > > > in the > > > > log: > > > > > > > > PMD: ixgbevf_dev_reset(): Ixgbe VF reset: Failed to update link. > > > > PMD: ixgbe_alloc_rx_queue_mbufs(): RX mbuf alloc failed queue_id=0 > > > > PMD: ixgbevf_dev_start(): Unable to initialize RX hardware (-12) > > > > PMD: ixgbevf_dev_reset(): Ixgbe VF reset: Failed to start device. > > > > > > > > Jumping in with GDB, it seems that the rte_rxmbuf_alloc call in > > > > ixgbe_alloc_rx_queue_mbufs returns NULL at iteration 64 out of 2048. > > > > The application has ~500 2MB hugepages, and there's 2GB of free > > > > memory available on top of that. > > > > > > > > Have you seen this before? Any pointer or suggestion for debugging? > > > > > > > > Thanks! > > > > > > > > -- > > > > Kind regards, > > > > Luca Boccassi > > > I think the problem is the mbuf occupied by the packets is not released. > > > This > > memory has to be released by the APP, so my patches haven?t covered this. > > Actually an example is needed to show how to use the reset API. I plan to > > modify > > the testpmd. > > > You may notice this feature is postponed to 16.11. Would you like to wait > > > for > > the new version that will include an example? > > > > Hi, > > > > Unfortunately we need the VF reset working sooner than that, so one way or > > the other I'll need to sort it out. Given I've got a use case where this is > > happening, > > if it can be helpful for you I'm more than happy to help as a guinea pig. > > If you > > could please give some guidance/guidelines with regards to which API to use > > to > > sort the mbuf problem, I can try it out and give back some feedback. > > > > Thanks! > I made a stupid mistake and deleted all my code. So, I have to take some time > to rewrite it :( > Attached the example I used to test the reset API. It's modified from the > l2fwd example. So you can compare it with l2fwd to see what need to be added. > Hopefully it can help :)
Thanks! That made me understand a couple of things more, and I've got past the problem. Unfortunately now there's a bigger issue - rte_eth_dev_reset is a blocking call. the _RESET event callback is fired when the PF goes down, but when I call rte_eth_dev_reset it will block until the PF goes back up. There is no way, as far as I can see, to know if the PF is back up before calling rte_eth_dev_reset. This is a problem because, as far as I understand, I have to call all the rte_eth_dev_ APIs from the same thread, in my case the master thread, and I can't have that block potentially indefinitely. Would it be possible to have 2 events instead of 1, one when the PF goes down and one when it goes up? This way an application would be able to soft-stop the port (drain queues, etc) when the PF is down, and then call the reset API when it goes back up. Thanks! -- Kind regards, Luca Boccassi
