This work is to make DPDK ports more visible and to enable using common
Linux tools to configure DPDK ports.
Patch is based on KNI but contains only control functionality of it,
also this patch does not include any Linux kernel network driver as
part of it.
Basically with the help of a kernel module (KCP), virtual Linux network
interfaces named as "dpdk$" are created per DPDK port, control messages
sent to these virtual interfaces are forwarded to DPDK, and response
sent back to Linux application.
Virtual interfaces created when DPDK application started and destroyed
automatically when DPDK application terminated.
Communication between kernel-space and DPDK done using netlink socket.
Currently implementation is not complete, sample support added for the
RFC, more functionality can be added based on community response.
With this RFC Patch, supported: get/set mac address/mtu of DPDK devices,
getting stats from DPDK devices and some set of ethtool commands.
Samples:
$ ifconfig
dpdk0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 90:e2:ba:0e:49:b8 txqueuelen 1000 (Ethernet)
RX packets 33 bytes 2058 (2.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 33 bytes 2058 (2.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dpdk1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:1b:21:76:fa:21 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
After some traffic on port 0:
$ ifconfig
dpdk0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 90:e2:ba:0e:49:77 txqueuelen 1000 (Ethernet)
RX packets 962 bytes 57798 (56.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 962 bytes 57798 (56.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
$ ethtool -i dpdk0
driver: rte_ixgbe_pmd
version: RTE 2.3.0-rc0
firmware-version:
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
$ ip l show dpdk0
25: dpdk0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
link/ether 90:e2:ba:0e:49:b8 brd ff:ff:ff:ff:ff:ff
$ ip l set dpdk0 addr 90:e2:ba:0e:49:77
$ ip l show dpdk0
25: dpdk0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
link/ether 90:e2:ba:0e:49:77 brd ff:ff:ff:ff:ff:ff
Ferruh Yigit (3):
rte_ctrl_if: add control interface library
kcp: add kernel control path kernel module
examples/ethtool: add control interface support to the application
config/common_linuxapp | 9 +-
examples/ethtool/ethtool-app/main.c | 8 +-
lib/Makefile | 3 +-
lib/librte_ctrl_if/Makefile | 58 +++++
lib/librte_ctrl_if/rte_ctrl_if.c | 166 ++++++++++++++
lib/librte_ctrl_if/rte_ctrl_if.h | 54 +++++
lib/librte_ctrl_if/rte_ctrl_if_version.map | 9 +
lib/librte_ctrl_if/rte_ethtool.c | 354 +++++++++++++++++++++++++++++
lib/librte_ctrl_if/rte_ethtool.h | 64 ++++++
lib/librte_ctrl_if/rte_nl.c | 263 +++++++++++++++++++++
lib/librte_ctrl_if/rte_nl.h | 60 +++++
lib/librte_eal/common/include/rte_log.h | 3 +-
lib/librte_eal/linuxapp/Makefile | 5 +-
lib/librte_eal/linuxapp/kcp/Makefile | 58 +++++
lib/librte_eal/linuxapp/kcp/kcp_dev.h | 81 +++++++
lib/librte_eal/linuxapp/kcp/kcp_ethtool.c | 261 +++++++++++++++++++++
lib/librte_eal/linuxapp/kcp/kcp_misc.c | 282 +++++++++++++++++++++++
lib/librte_eal/linuxapp/kcp/kcp_net.c | 209 +++++++++++++++++
lib/librte_eal/linuxapp/kcp/kcp_nl.c | 194 ++++++++++++++++
mk/rte.app.mk | 3 +-
20 files changed, 2138 insertions(+), 6 deletions(-)
create mode 100644 lib/librte_ctrl_if/Makefile
create mode 100644 lib/librte_ctrl_if/rte_ctrl_if.c
create mode 100644 lib/librte_ctrl_if/rte_ctrl_if.h
create mode 100644 lib/librte_ctrl_if/rte_ctrl_if_version.map
create mode 100644 lib/librte_ctrl_if/rte_ethtool.c
create mode 100644 lib/librte_ctrl_if/rte_ethtool.h
create mode 100644 lib/librte_ctrl_if/rte_nl.c
create mode 100644 lib/librte_ctrl_if/rte_nl.h
create mode 100644 lib/librte_eal/linuxapp/kcp/Makefile
create mode 100644 lib/librte_eal/linuxapp/kcp/kcp_dev.h
create mode 100644 lib/librte_eal/linuxapp/kcp/kcp_ethtool.c
create mode 100644 lib/librte_eal/linuxapp/kcp/kcp_misc.c
create mode 100644 lib/librte_eal/linuxapp/kcp/kcp_net.c
create mode 100644 lib/librte_eal/linuxapp/kcp/kcp_nl.c
--
2.5.0
