On Mon, Jan 04, 2016 at 02:36:14PM +0000, Ananyev, Konstantin wrote:
>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Adrien Mazarguil
> > Sent: Monday, January 04, 2016 11:38 AM
> > To: Tan, Jianfeng
> > Cc: dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 01/12] ethdev: add API to query what/if
> > packet type is set
> >
> > I'm not sure about the usefulness of this new callback, but one issue I see
> > with rte_eth_dev_get_ptype_info() is that determining the proper size for
> > ptypes[] according to a mask is awkward. For instance suppose
> > RTE_PTYPE_L4_MASK is redefined to a different size at some point, the caller
> > must dynamically adjust its ptypes[] array size to avoid a possible
> > overflow, just in case.
> >
> > I suggest one of these solutions:
> >
> > - A callback to query for a single type at once instead (easiest method in
> > my opinion).
> >
> > - An additional argument with the number of entries in ptypes[], in which
> > case rte_eth_dev_get_ptype_info() should return the number of entries that
> > would have been filled regardless, a bit like snprintf().
>
> +1 for the second option.
> Also not sure you really need: RTE_PTYPE_*_MAX_NUM macros.
> Konstantin
+1 for the second option. But see below.
> >
> > On Thu, Dec 31, 2015 at 02:53:08PM +0800, Jianfeng Tan wrote:
> > > Add a new API rte_eth_dev_get_ptype_info to query what/if packet type will
> > > be set by current rx burst function.
> > >
> > > Signed-off-by: Jianfeng Tan <jianfeng.tan at intel.com>
> > > ---
> > > lib/librte_ether/rte_ethdev.c | 12 ++++++++++++
> > > lib/librte_ether/rte_ethdev.h | 22 ++++++++++++++++++++++
> > > lib/librte_mbuf/rte_mbuf.h | 13 +++++++++++++
> > > 3 files changed, 47 insertions(+)
> > >
> > > diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> > > index ed971b4..1885374 100644
> > > --- a/lib/librte_ether/rte_ethdev.c
> > > +++ b/lib/librte_ether/rte_ethdev.c
> > > @@ -1614,6 +1614,18 @@ rte_eth_dev_info_get(uint8_t port_id, struct
> > > rte_eth_dev_info *dev_info)
> > > dev_info->driver_name = dev->data->drv_name;
> > > }
> > >
> > > +int
> > > +rte_eth_dev_get_ptype_info(uint8_t port_id, uint32_t ptype_mask,
> > > + uint32_t ptypes[])
> > > +{
> > > + struct rte_eth_dev *dev;
> > > +
> > > + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> > > + dev = &rte_eth_devices[port_id];
> > > + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_ptype_info_get, -ENOTSUP);
> > > + return (*dev->dev_ops->dev_ptype_info_get)(dev, ptype_mask, ptypes);
> > > +}
> > > +
> > > void
> > > rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr)
> > > {
> > > diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> > > index bada8ad..e97b632 100644
> > > --- a/lib/librte_ether/rte_ethdev.h
> > > +++ b/lib/librte_ether/rte_ethdev.h
> > > @@ -1021,6 +1021,10 @@ typedef void (*eth_dev_infos_get_t)(struct
> > > rte_eth_dev *dev,
> > > struct rte_eth_dev_info *dev_info);
> > > /**< @internal Get specific informations of an Ethernet device. */
> > >
> > > +typedef int (*eth_dev_ptype_info_get_t)(struct rte_eth_dev *dev,
> > > + uint32_t ptype_mask, uint32_t ptypes[]);
> > > +/**< @internal Get ptype info of eth_rx_burst_t. */
> > > +
> > > typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
> > > uint16_t queue_id);
> > > /**< @internal Start rx and tx of a queue of an Ethernet device. */
> > > @@ -1347,6 +1351,7 @@ struct eth_dev_ops {
> > > eth_queue_stats_mapping_set_t queue_stats_mapping_set;
> > > /**< Configure per queue stat counter mapping. */
> > > eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
> > > + eth_dev_ptype_info_get_t dev_ptype_info_get; /** Get ptype info */
> > > mtu_set_t mtu_set; /**< Set MTU. */
> > > vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
> > > vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID
> > > Setup. */
> > > @@ -2273,6 +2278,23 @@ extern void rte_eth_dev_info_get(uint8_t port_id,
> > > struct rte_eth_dev_info *dev_info);
> > >
> > > /**
> > > + * Retrieve the contextual information of an Ethernet device.
> > > + *
> > > + * @param port_id
> > > + * The port identifier of the Ethernet device.
> > > + * @param ptype_mask
> > > + * A hint of what kind of packet type which the caller is interested in
> > > + * @param ptypes
> > > + * An array of packet types to be filled with
> > > + * @return
> > > + * - (>=0) if successful. Indicate number of valid values in ptypes
> > > array.
> > > + * - (-ENOTSUP) if hardware-assisted VLAN stripping not configured.
> > > + * - (-ENODEV) if *port_id* invalid.
> > > + */
> > > +extern int rte_eth_dev_get_ptype_info(uint8_t port_id,
> > > + uint32_t ptype_mask, uint32_t ptypes[]);
> > > +
> > > +/**
> > > * Retrieve the MTU of an Ethernet device.
> > > *
> > > * @param port_id
> > > diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> > > index f234ac9..21d4aa2 100644
> > > --- a/lib/librte_mbuf/rte_mbuf.h
> > > +++ b/lib/librte_mbuf/rte_mbuf.h
> > > @@ -282,6 +282,8 @@ extern "C" {
> > > * It is used for outer packet for tunneling cases.
> > > */
> > > #define RTE_PTYPE_L2_MASK 0x0000000f
> > > +
> > > +#define RTE_PTYPE_L2_MAX_NUM 4
> > > /**
> > > * IP (Internet Protocol) version 4 packet type.
> > > * It is used for outer packet for tunneling cases, and does not contain
> > > any
> > > @@ -349,6 +351,8 @@ extern "C" {
> > > * It is used for outer packet for tunneling cases.
> > > */
> > > #define RTE_PTYPE_L3_MASK 0x000000f0
> > > +
> > > +#define RTE_PTYPE_L3_MAX_NUM 6
> > > /**
> > > * TCP (Transmission Control Protocol) packet type.
> > > * It is used for outer packet for tunneling cases.
> > > @@ -435,6 +439,8 @@ extern "C" {
> > > * It is used for outer packet for tunneling cases.
> > > */
> > > #define RTE_PTYPE_L4_MASK 0x00000f00
> > > +
> > > +#define RTE_PTYPE_L4_MAX_NUM 6
> > > /**
> > > * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet
> > > type.
> > > *
> > > @@ -508,6 +514,8 @@ extern "C" {
> > > * Mask of tunneling packet types.
> > > */
> > > #define RTE_PTYPE_TUNNEL_MASK 0x0000f000
> > > +
> > > +#define RTE_PTYPE_TUNNEL_MAX_NUM 6
> > > /**
> > > * Ethernet packet type.
> > > * It is used for inner packet type only.
> > > @@ -527,6 +535,8 @@ extern "C" {
> > > * Mask of inner layer 2 packet types.
> > > */
> > > #define RTE_PTYPE_INNER_L2_MASK 0x000f0000
> > > +
> > > +#define RTE_PTYPE_INNER_L2_MAX_NUM 2
> > > /**
> > > * IP (Internet Protocol) version 4 packet type.
> > > * It is used for inner packet only, and does not contain any header
> > > option.
> > > @@ -588,6 +598,8 @@ extern "C" {
> > > * Mask of inner layer 3 packet types.
> > > */
> > > #define RTE_PTYPE_INNER_L3_MASK 0x00f00000
> > > +
> > > +#define RTE_PTYPE_INNER_L3_MAX_NUM 6
> > > /**
> > > * TCP (Transmission Control Protocol) packet type.
> > > * It is used for inner packet only.
> > > @@ -666,6 +678,7 @@ extern "C" {
> > > */
> > > #define RTE_PTYPE_INNER_L4_MASK 0x0f000000
> > >
> > > +#define RTE_PTYPE_INNER_L4_MAX_NUM 6
> > > /**
> > > * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types
> > > one by
> > > * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4
> > > can
I think we miss a comment here in how those 2/6/4 values are chosen
because, according to the mask, I expect 16 possibilities but I get
less. It will help a lot anyone who needs to add a new type.
Extending the snprintf behavior above, it is best to remove the mask
argument altogether and have rte_eth_dev_get_ptype_info() return the
entire list every time. Applications need to iterate on the result in
any case.
rte_eth_dev_get_ptype_info(uint8_t port_id, uint32_t ptypes[],
size_t max_entries)
Another point, I have read the example patch (l3fwd) but I don't
understand why the PMD is not responsible for filling the packet type in
the MBUF (packet parsing is done by parse_packet_type()). Why the extra
computation?
I see it more like an offload request (as checksum, etc...) and if the
NIC does not support it then the application does the necessary overload.
Best regards,
--
N?lio Laranjeiro
6WIND
