On Wed, 24 Feb 2016 13:33:04 +0800 Wenzhuo Lu <wenzhuo.lu at intel.com> wrote:
> + On Intel x550 series NICs, HW supports a feature called MDD (Malcicious > + Driver Detection). > + MDD is used to check the behavior of the VF driver. It means when > transmitting > + packets, the VF must use the advanced context descriptor and set it > correctly. > + And VF must set the CC (Check Context) bit either. This is hard sentence to read, why not reword as: The Intel x550 series NIC's support1 a feature called MDD (Malcicious Driver Detection) which checks the behavior of the VF driver. If this feature is enabled, the VF must use the advanced context descriptor correctly and set the CC (Check Context) bit. > + DPDK PF doesn't support MDD. We may hit problem in this scenario kernel PF > + > + DPDK VF. If user enables MDD in kernel PF, DPDK VF will not work. Because > + kernel PF thinks the VF is malicious. But actually it's not. The only > reason > + is the VF doesn't act as MDD required. > + There's significant performance impact to support MDD. DPDK should check if > + the advanced context descriptor should be set and set it. And DPDK has to > ask > + the info about the header length from the upper layer, because parsing the > + packet itself is not acceptale. So, it's too expensive to support MDD. > + When using kernel PF + DPDK VF on x550, please make sure using the kernel > + driver that disables MDD or can disable MDD. (Some kernel driver can use > + this CLI 'insmod ixgbe.ko MDD=0,0' to disable MDD. Some kernel driver > disable > + it by default.) > +
