V4-changes: - fix doc build issue: WARNING: undefined label: pmd_build_and_test
v3-changes: - fix doc build issue. - fix compilation issue on fedore:43-gcc-minsize V2-changes: - compilation fixes. V1-changes: This series adds new PMD features to the ENETC4 driver targeting the NXP i.MX95 NETC IP. The series covers: - KEEP_CRC Rx offload: preserve the Ethernet FCS in the receive buffer. - TSO: TCP Segmentation Offload for the VF Tx path. - RSC/LRO: hardware Receive Segment Coalesce for PF and VF Rx paths. - Link speed code: extend the PF-to-VF mailbox field from 4-bit to 8-bit to support speeds beyond 10G. - Firmware version: report the NETC IP version via fw_version_get. - Register dump: dump SI, port (PF) and BD ring registers. - Ring parameters: implement rxq_info_get / txq_info_get for the VF. - Link-up interrupt: refresh the cached link speed on each VF link-up interrupt so that link_update returns the current speed immediately. - Stats reset: software snapshot/delta approach for VF counter reset. - Per-queue Rx interrupt: MSI-X per-queue Rx interrupts for the VF, enabling interrupt-driven receive with l3fwd-power. - SI VLAN: hardware port VLAN insertion/removal for PF and VF. - VF link status bitmask: switch VF link status to bitmask encoding to align with the PF and newer kernel driver conventions. - TX PAUSE: VF sets Rx congestion mode when the PF signals TX PAUSE negotiated on the wire; adds Flow control = Y to enetc4.ini. - WRR Tx scheduler: per-ring WRR weights via enetc4_txq_wrr devarg. Gagandeep Singh (14): net/enetc: add KEEP_CRC offload support for ENETC4 net/enetc: add TSO support for ENETC4 VF net/enetc: add RSC (hardware LRO) support for ENETC4 net/enetc: extend link speed code field to 8-bit for PF-to-VF message net/enetc: support firmware version get for VF net/enetc: support registers dump net/enetc: support ethtool ring parameters net/enetc: refresh link speed on VF link-up interrupt net/enetc: support stats reset for VF net/enetc4: add per-queue Rx interrupt support for VF net/enetc4: add SI-based port VLAN insertion and removal net/enetc4: update VF link status to bitmask encoding net/enetc4: enable TX PAUSE via VF RX congestion mode net/enetc4: add WRR Tx scheduler devarg for VF rings doc/guides/nics/enetc4.rst | 77 +++ doc/guides/nics/features/enetc4.ini | 8 + doc/guides/rel_notes/release_26_11.rst | 19 + drivers/net/enetc/base/enetc4_hw.h | 129 +++- drivers/net/enetc/base/enetc_hw.h | 6 + drivers/net/enetc/enetc.h | 135 ++++- drivers/net/enetc/enetc4_ethdev.c | 402 +++++++++++-- drivers/net/enetc/enetc4_vf.c | 779 ++++++++++++++++++++++--- drivers/net/enetc/enetc_rxtx.c | 529 ++++++++++++++++- 9 files changed, 1939 insertions(+), 145 deletions(-) -- 2.25.1
