> > +void txgbe_e56_rx_rd_second_code_40g(struct txgbe_hw *hw, int
> > *SECOND_CODE, int lane)
> > +{
> > + int i, median;
> > + unsigned int rdata;
> > + u32 addr;
> > + int RXS_BBCDR_SECOND_ORDER_ST[RXS_READ_COUNT];
> > +
> > + /* Set ovrd_en=0 to read ASIC value */
> > + addr = E56G__RXS0_ANA_OVRDEN_1_ADDR + (lane * E56PHY_RXS_OFFSET);
> > + rdata = rd32_ephy(hw, addr);
> > + EPHY_XFLD(E56G__RXS0_ANA_OVRDEN_1, ovrd_en_ana_bbcdr_int_cstm_i) = 0;
> > + wr32_ephy(hw, addr, rdata);
> > +
> > + /*
> > + * As status update from RXS hardware is asynchronous to read status of
> > SECOND_ORDER,
> > + * follow sequence mentioned below.
> > + */
> > + for (i = 0; i < RXS_READ_COUNT; i = i + 1) {
> > + addr = E56G__RXS0_ANA_OVRDVAL_5_ADDR + (lane *
> > E56PHY_RXS_OFFSET);
> > + rdata = rd32_ephy(hw, addr);
> > + RXS_BBCDR_SECOND_ORDER_ST[i] =
> > EPHY_XFLD(E56G__RXS0_ANA_OVRDVAL_5,
> > + ana_bbcdr_int_cstm_i);
> > + usec_delay(100);
> > + }
> > +
> > + /* sort array RXS_BBCDR_SECOND_ORDER_ST[i] */
> > + qsort(RXS_BBCDR_SECOND_ORDER_ST, RXS_READ_COUNT, sizeof(int),
> > txgbe_e56_int_cmp);
> > +
> > + median = ((RXS_READ_COUNT + 1) / 2) - 1;
> > + *SECOND_CODE = RXS_BBCDR_SECOND_ORDER_ST[median];
> > +
> > + return;
> > +}
>
> These extra returns are causing extra checkpatch warnings.
> I know this is base code but if possible could you remove them.
>
>
> WARNING:RETURN_VOID: void function return statements are not generally useful
> #707: FILE: drivers/net/txgbe/base/txgbe_e56.c:1806:
> + return;
> +}
>
> WARNING:RETURN_VOID: void function return statements are not generally useful
> #736: FILE: drivers/net/txgbe/base/txgbe_e56.c:1835:
> + return;
> +}
Alternatively, it can be declared as a static function. It is only invoked in
this .c file.
