On Friday 12 August 2016 03:45 PM, Chao Zhu wrote: > Another comment is, comment out lcore_socket_id check will influence other > architectures. If possible, I would like to make this change to Power > specific.
Hi Chao, I am revisiting cpu_core_map_init() fn. I realize, all we handle is max values of socket/core/ht. So, ideally the function should not break in any arch. In my quick test w/o adjusting prev max values (4,32,4,0), only for ht > 1, creating cpu map panics in ppc i.e (4,32,1,0) is able to create core map and app runs. I continue to debug this and fix this example app separately. So, I will be sending powerpc specific enablement of lpm,acl,port,table and sched in v5. Example ip_pipeline will be fixed in separate patch. Thanks, Gowrishankar > -----Original Message----- > From: gowrishankar muthukrishnan [mailto:gowrishankar.m at linux.vnet.ibm.com] > Sent: 2016?8?12? 17:00 > To: Chao Zhu <chaozhu at linux.vnet.ibm.com> > Cc: dev at dpdk.org; 'Bruce Richardson' <bruce.richardson at intel.com>; > 'Konstantin Ananyev' <konstantin.ananyev at intel.com>; 'Thomas Monjalon' > <thomas.monjalon at 6wind.com>; 'Cristian Dumitrescu' <cristian.dumitrescu at > intel.com>; 'Pradeep' <pradeep at us.ibm.com> > Subject: Re: [PATCH v4 3/6] ip_pipeline: fix lcore mapping for varying SMT > threads as in ppc64 > > On Friday 12 August 2016 02:14 PM, Chao Zhu wrote: >> Gowrishankar, >> >> I suggest to set the following value: >> >> n_max_cores_per_socket = 8 >> n_max_ht_per_core = 8 >> >> This will cover most of the Power8 servers. >> Any comments? > Sure Chao. I will include this change in v5. If there are no other comments, > I can spin out v5, with changes in this patch. > > Regards, > Gowrishankar >> -----Original Message----- >> From: gowrishankar muthukrishnan >> [mailto:gowrishankar.m at linux.vnet.ibm.com] >> Sent: 2016?8?11? 20:02 >> To: Chao Zhu <chaozhu at linux.vnet.ibm.com> >> Cc: dev at dpdk.org; 'Bruce Richardson' <bruce.richardson at intel.com>; >> 'Konstantin Ananyev' <konstantin.ananyev at intel.com>; 'Thomas Monjalon' >> <thomas.monjalon at 6wind.com>; 'Cristian Dumitrescu' >> <cristian.dumitrescu at intel.com>; 'Pradeep' <pradeep at us.ibm.com> >> Subject: Re: [PATCH v4 3/6] ip_pipeline: fix lcore mapping for varying >> SMT threads as in ppc64 >> >> On Thursday 11 August 2016 03:59 PM, Chao Zhu wrote: >>> Gowrishankar, >>> >>> Thanks for the detail. >>> If my understanding is correct, Power8 has different chips. Some of the >>> OpenPOWER chips have 8 cores per socket. And the max threads per core is 8. >>> Should we support this in cpu_core_map_init()? >>> >>> Here's a dump from the OpenPOWER system. >>> ====================================== >>> # lscpu >>> Architecture: ppc64le >>> Byte Order: Little Endian >>> CPU(s): 64 >>> On-line CPU(s) list: 0,8,16,24,32,40,48,56 >>> Off-line CPU(s) list: 1-7,9-15,17-23,25-31,33-39,41-47,49-55,57-63 >>> Thread(s) per core: 1 >>> Core(s) per socket: 8 >>> Socket(s): 1 >>> NUMA node(s): 1 >>> Model: unknown >>> L1d cache: 64K >>> L1i cache: 32K >>> L2 cache: 512K >>> L3 cache: 8192K >>> NUMA node0 CPU(s): 0,8,16,24,32,40,48,56 >>> ========================================= >>> >>> >>>> +#if defined(RTE_ARCH_PPC_64) >>>> + app->core_map = cpu_core_map_init(2, 5, 1, 0); #else >>>> >>>> This value seems quite strange. Can you give more detail? >> Based on config of tested server (as below output), >> >> CPU(s): 80 >> On-line CPU(s) list: 0,8,16,24,32,40,48,56,64,72 >> Off-line CPU(s) list: >> 1-7,9-15,17-23,25-31,33-39,41-47,49-55,57-63,65-71,73-79 >> Thread(s) per core: 1 <<< >> Core(s) per socket: 5 <<< >> Socket(s): 2 <<< >> NUMA node(s): 2 >> >> cpu_core_map_init parameters (2,5,1,0) were prepared. Instead, we can cap >> max sockets/core/ht counts to possible maximum supported today. >> >> Regards, >> Gowrishankar >>>> app->core_map = cpu_core_map_init(4, 32, 4, 0); >>>> +#endif >>> -----Original Message----- >>> From: gowrishankar muthukrishnan >>> [mailto:gowrishankar.m at linux.vnet.ibm.com] >>> Sent: 2016?8?9? 19:14 >>> To: Chao Zhu <chaozhu at linux.vnet.ibm.com>; dev at dpdk.org >>> Cc: 'Bruce Richardson' <bruce.richardson at intel.com>; 'Konstantin >>> Ananyev' <konstantin.ananyev at intel.com>; 'Thomas Monjalon' >>> <thomas.monjalon at 6wind.com>; 'Cristian Dumitrescu' >>> <cristian.dumitrescu at intel.com>; 'Pradeep' <pradeep at us.ibm.com> >>> Subject: Re: [PATCH v4 3/6] ip_pipeline: fix lcore mapping for >>> varying SMT threads as in ppc64 >>> >>> Hi Chao, >>> Sure. Please find below one. >>> >>> This patch fixes ip_pipeline panic in app_init_core_map while preparing cpu >>> core map in powerpc with SMT off. cpu_core_map_compute_linux currently >>> prepares core mapping based on file existence in sysfs ie. >>> >>> /sys/devices/system/cpu/cpu<LCORE_NUM>/topology/physical_package_id >>> /sys/devices/system/cpu/cpu<LCORE_NUM>/topology/core_id >>> >>> These files do not exist for lcores which are offline for any reason (as in >>> powerpc, while SMT is off). In this situation, this function should further >>> continue preparing map for other online lcores instead of returning with -1 >>> for a first unavailable lcore. >>> >>> Also, in SMT=off scenario for powerpc, lcore ids can not be always >>> indexed from >>> 0 upto 'number of cores present' (/sys/devices/system/cpu/present). >>> For eg, for an online lcore 32, core_id returned in sysfs is 112 >>> where online lcores are >>> 10 (as in one configuration), hence sysfs lcore id can not be checked with >>> indexing lcore number before positioning lcore map array. >>> >>> Thanks, >>> Gowrishankar >>> >>> On Tuesday 09 August 2016 02:37 PM, Chao Zhu wrote: >>>> Gowrishankar, >>>> >>>> Can you give more description about this patch? >>>> Thank you! >>>> >>>> -----Original Message----- >>>> From: Gowrishankar Muthukrishnan >>>> [mailto:gowrishankar.m at linux.vnet.ibm.com] >>>> Sent: 2016?8?6? 20:33 >>>> To: dev at dpdk.org >>>> Cc: Chao Zhu <chaozhu at linux.vnet.ibm.com>; Bruce Richardson >>>> <bruce.richardson at intel.com>; Konstantin Ananyev >>>> <konstantin.ananyev at intel.com>; Thomas Monjalon >>>> <thomas.monjalon at 6wind.com>; Cristian Dumitrescu >>>> <cristian.dumitrescu at intel.com>; Pradeep <pradeep at us.ibm.com>; >>>> gowrishankar <gowrishankar.m at linux.vnet.ibm.com> >>>> Subject: [PATCH v4 3/6] ip_pipeline: fix lcore mapping for varying >>>> SMT threads as in ppc64 >>>> >>>> From: gowrishankar <gowrishankar.m at linux.vnet.ibm.com> >>>> >>>> offline lcore would still refer to original core id and this has to >>>> be considered while creating cpu core mask. >>>> >>>> Signed-off-by: Gowrishankar <gowrishankar.m at linux.vnet.ibm.com> >>>> --- >>>> config/defconfig_ppc_64-power8-linuxapp-gcc | 3 --- >>>> examples/ip_pipeline/cpu_core_map.c | 12 +----------- >>>> examples/ip_pipeline/init.c | 4 ++++ >>>> 3 files changed, 5 insertions(+), 14 deletions(-) >>>> >>>> diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc >>>> b/config/defconfig_ppc_64-power8-linuxapp-gcc >>>> index dede34f..a084672 100644 >>>> --- a/config/defconfig_ppc_64-power8-linuxapp-gcc >>>> +++ b/config/defconfig_ppc_64-power8-linuxapp-gcc >>>> @@ -58,6 +58,3 @@ CONFIG_RTE_LIBRTE_FM10K_PMD=n >>>> >>>> # This following libraries are not available on Power. So >>>> they're turned off. >>>> CONFIG_RTE_LIBRTE_SCHED=n >>>> -CONFIG_RTE_LIBRTE_PORT=n >>>> -CONFIG_RTE_LIBRTE_TABLE=n >>>> -CONFIG_RTE_LIBRTE_PIPELINE=n >>>> diff --git a/examples/ip_pipeline/cpu_core_map.c >>>> b/examples/ip_pipeline/cpu_core_map.c >>>> index cb088b1..482e68e 100644 >>>> --- a/examples/ip_pipeline/cpu_core_map.c >>>> +++ b/examples/ip_pipeline/cpu_core_map.c >>>> @@ -351,9 +351,6 @@ cpu_core_map_compute_linux(struct cpu_core_map *map) >>>> int lcore_socket_id = >>>> >>>> cpu_core_map_get_socket_id_linux(lcore_id); >>>> >>>> - if (lcore_socket_id < 0) >>>> - return -1; >>>> - >>>> if (((uint32_t) lcore_socket_id) == socket_id) >>>> n_detected++; >>>> } >>>> @@ -368,18 +365,11 @@ cpu_core_map_compute_linux(struct cpu_core_map *map) >>>> >>>> cpu_core_map_get_socket_id_linux( >>>> lcore_id); >>>> >>>> - if (lcore_socket_id < 0) >>>> - return -1; >>>> - >>>> Why to remove the lcore_socket_id check? >>>> >>>> int lcore_core_id = >>>> cpu_core_map_get_core_id_linux( >>>> lcore_id); >>>> >>>> - if (lcore_core_id < 0) >>>> - return -1; >>>> - >>>> - if (((uint32_t) lcore_socket_id == >>>> socket_id) && >>>> - ((uint32_t) lcore_core_id == >>>> core_id)) { >>>> + if ((uint32_t) lcore_socket_id == socket_id) >>>> { >>>> uint32_t pos = >>>> cpu_core_map_pos(map, >>>> socket_id, >>>> core_id_contig, >>>> diff --git a/examples/ip_pipeline/init.c >>>> b/examples/ip_pipeline/init.c index cd167f6..60c931f 100644 >>>> --- a/examples/ip_pipeline/init.c >>>> +++ b/examples/ip_pipeline/init.c >>>> @@ -61,7 +61,11 @@ static void >>>> app_init_core_map(struct app_params *app) { >>>> APP_LOG(app, HIGH, "Initializing CPU core map ..."); >>>> +#if defined(RTE_ARCH_PPC_64) >>>> + app->core_map = cpu_core_map_init(2, 5, 1, 0); #else >>>> >>>> This value seems quite strange. Can you give more detail? >>>> >>>> app->core_map = cpu_core_map_init(4, 32, 4, 0); >>>> +#endif >>>> >>>> if (app->core_map == NULL) >>>> rte_panic("Cannot create CPU core map\n"); >>>> -- >>>> 1.9.1 >>>> >>>> >>>> >>> >> > >
