2016-04-07 14:50 GMT+02:00 Vivek Gupta <vivek-g at hcl.com>: > Hi > > I have binded eth0 and eth1 with DPDK and then tried to run the l2fwd > example as below > > ./build/l2fwd -c f -n 4 -- -q 8 -p 0x11 but each time I get error > ***************************** > Checking link status.............. > Port 0 Link Down > Port 1 Link Down > ******************************************** > > I tried with test-pmd example but same result.Could you please help to up > the link? > > Port status is as below- > Network devices using DPDK-compatible driver > ============================================ > 0000:01:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic > unused=igb_uio > 0000:01:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic > unused=igb_uio > 0000:06:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic > unused=igb_uio > 0000:06:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic > unused=igb_uio > > Network devices using kernel driver > =================================== > 0000:81:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=eth4 drv=ixgbe > unused=igb_uio,uio_pci_generic > 0000:81:00.1 'Ethernet Controller 10-Gigabit X540-AT2' if=eth5 drv=ixgbe > unused=igb_uio,uio_pci_generic > > Other network devices > ===================== > <none> > > > Thanks & Regards > Vivek Gupta >
In which commit or version are you? Marc > > > ::DISCLAIMER:: > > ---------------------------------------------------------------------------------------------------------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > E-mail transmission is not guaranteed to be secure or error-free as > information could be intercepted, corrupted, > lost, destroyed, arrive late or incomplete, or may contain viruses in > transmission. The e mail and its contents > (with or without referred errors) shall therefore not attach any liability > on the originator or HCL or its affiliates. > Views or opinions, if any, presented in this email are solely those of the > author and may not necessarily reflect the > views or opinions of HCL or its affiliates. Any form of reproduction, > dissemination, copying, disclosure, modification, > distribution and / or publication of this message without the prior > written consent of authorized representative of > HCL is strictly prohibited. If you have received this email in error > please delete it and notify the sender immediately. > Before opening any email and/or attachments, please check them for viruses > and other defects. > > > ---------------------------------------------------------------------------------------------------------------------------------------------------- > >
