> From: Bruce Richardson [mailto:bruce.richard...@intel.com]
> Sent: Tuesday, 29 April 2025 14.53
>
> On Sun, Apr 27, 2025 at 09:00:31AM +0200, Morten Brørup wrote:
> > > From: Stephen Hemminger [mailto:step...@networkplumber.org]
> > > Sent: Saturday, 26 April 2025 17.24
> > >
> > > On Fri, 25 Apr 2025 13:52:55 +0200
> > > Morten Brørup <m...@smartsharesystems.com> wrote:
> > >
> > > > Bruce,
> > > >
> > > > rte_eth_stats_get() on Intel NICs seems slow to me.
> > > >
> > > > E.g. getting the stats on a single port takes ~132 us (~451,000
> CPU
> > > cycles) using the igb driver, and ~50 us using the i40e driver.
> > > >
> > > > Referring to the igb driver source code [1], it's 44 calls to
> > > E1000_READ_REG(), so the math says that each one takes 3 us
> (~10,000
> > > CPU cycles).
> > > >
> > > > Is this expected behavior?
> > > >
> > > > It adds up, e.g. it takes a full millisecond to fetch the stats
> from
> > > eight ports using the igb driver.
> > > >
> > > > [1]:
> > >
> https://elixir.bootlin.com/dpdk/v24.11.1/source/drivers/net/e1000/igb_e
> > > thdev.c#L1724
> > > >
> > > >
> > > > Med venlig hilsen / Kind regards,
> > > > -Morten Brørup
> > > >
> > >
> > > Well reading each stat requires a PCI access. And PCI accesses are
> non-
> > > cached.
> >
> > You're right, thank you for reminding me. I was caught by surprise
> that getting 7 counters took so long.
> > Perhaps reading 44 NIC registers over the PCI bus is required to
> calculate those summary counters. Or nobody cared to optimize this
> function to only read the necessary registers.
> >
> > We periodically poll the ethdev stats in a management thread, and I
> noticed the duration because of the jitter it caused in that thread.
> > It's not a real problem. If it was, we could easily move it to a
> separate thread or poll the counters iteratively port by port, instead
> of all ports in one go.
> > A longwinded way of saying: Probably not worth optimizing. ;-)
> >
>
> I actually think it is something that we should consider optimizing,
> but I
> also think it needs to be done at the API level. Even if the user is
> only
> interested in e.g. the Rx bytes counter, the only way to get that is to
> retrieve the full stats set and use the counter from it. Therefore,
> instead
> of reading (possibly) just one register, you end up reading 44 as in
> the
> case you describe. Maybe we need to add a stats mask to the get call,
> to
> allow a user to indicate that they only want a subset of the stats, in
> order to improve performance.
I think xstats already serves that purpose.
<feature creep>
We could improve xstats by maintaining a repository of standardized xstats
counter names and definitions. That would also make it possible to conformance
test these.
</feature creep>
Basic stats in struct rte_eth_stats [2] are 7 counters + the rx_nombuf software
counter. This should be acceptable. And it makes it very easy for an
application to implement basic ethdev stats.
For some reason, struct rte_eth_stats also holds the per-queue counters. They
should be moved out of here.
The documentation for rte_eth_stats_get() even says that it only fills the
first part, not the per-queue counters, so it should be possible.
The igb driver fetches many registers not required for getting the 7 counters
asked for. E.g. fetching the packet size range counters is certainly not
required, but the driver does it anyway.
If other drivers implement a similar design pattern ("fetch all counters to
update some"), the execution time of an API call supposedly fetching 7 counters
may come as a surprise to other developers too.
So perhaps a warning about execution time should be added to the
rte_eth_stats_get() documentation, to formally accept this behavior by drivers.
That would be an easy fix. :-)
[2]:
https://elixir.bootlin.com/dpdk/v24.11.1/source/lib/ethdev/rte_ethdev.h#L262
