The modifying of a global register value, which has an affect on multiple ports is an important change to HW. However, the actual details of that change is only relevant to developers and not general users. Therefore reduce the log level from "warning" - which implies something is wrong - to "info".
Signed-off-by: Bruce Richardson <[email protected]> --- drivers/net/i40e/i40e_ethdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c index 30dcdc68a8..39b6e28aad 100644 --- a/drivers/net/i40e/i40e_ethdev.c +++ b/drivers/net/i40e/i40e_ethdev.c @@ -750,7 +750,7 @@ i40e_write_global_rx_ctl(struct i40e_hw *hw, uint32_t reg_addr, ori_reg_val = i40e_read_rx_ctl(hw, reg_addr); i40e_write_rx_ctl(hw, reg_addr, reg_val); if (ori_reg_val != reg_val) - PMD_DRV_LOG(WARNING, + PMD_DRV_LOG(INFO, "i40e device %s changed global register [0x%08x]." " original: 0x%08x, new: 0x%08x", dev->device->name, reg_addr, ori_reg_val, reg_val); @@ -1352,7 +1352,7 @@ i40e_aq_debug_write_global_register(struct i40e_hw *hw, } if (ori_reg_val != reg_val) - PMD_DRV_LOG(WARNING, + PMD_DRV_LOG(INFO, "i40e device %s changed global register [0x%08x]." " original: 0x%"PRIx64", after: 0x%"PRIx64, dev->device->name, reg_addr, ori_reg_val, reg_val); @@ -9774,7 +9774,7 @@ i40e_check_write_global_reg(struct i40e_hw *hw, uint32_t addr, uint32_t val) if (reg != val) { i40e_write_rx_ctl(hw, addr, val); - PMD_DRV_LOG(WARNING, + PMD_DRV_LOG(INFO, "i40e device %s changed global register [0x%08x]." " original: 0x%08x, new: 0x%08x", dev->device->name, addr, reg, -- 2.43.0
