Add support to check link feature for VF device, including link speed,
duplex mode and link state.
Signed-off-by: Zaiyu Wang <zaiyuw...@trustnetic.com>
---
doc/guides/nics/features/ngbe_vf.ini | 1 +
drivers/net/ngbe/base/ngbe_vf.c | 96 ++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_vf.h | 2 +
drivers/net/ngbe/ngbe_ethdev_vf.c | 9 +++
4 files changed, 108 insertions(+)
diff --git a/doc/guides/nics/features/ngbe_vf.ini
b/doc/guides/nics/features/ngbe_vf.ini
index d6f2a1d726..8e66565e6a 100644
--- a/doc/guides/nics/features/ngbe_vf.ini
+++ b/doc/guides/nics/features/ngbe_vf.ini
@@ -4,6 +4,7 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Link status = Y
Unicast MAC filter = Y
Rx interrupt = Y
MTU update = Y
diff --git a/drivers/net/ngbe/base/ngbe_vf.c b/drivers/net/ngbe/base/ngbe_vf.c
index 039f87423d..52b86afc56 100644
--- a/drivers/net/ngbe/base/ngbe_vf.c
+++ b/drivers/net/ngbe/base/ngbe_vf.c
@@ -337,6 +337,99 @@ s32 ngbevf_set_uc_addr_vf(struct ngbe_hw *hw, u32 index,
u8 *addr)
return ret_val;
}
+/**
+ * ngbe_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ngbe_check_mac_link_vf(struct ngbe_hw *hw, u32 *speed,
+ bool *link_up, bool wait_to_complete)
+{
+ /**
+ * for a quick link status checking, wait_to_compelet == 0,
+ * skip PF link status checking
+ */
+ bool no_pflink_check = 0;
+ struct ngbe_mbx_info *mbx = &hw->mbx;
+ struct ngbe_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u32 links_reg;
+ u32 in_msg = 0;
+
+ UNREFERENCED_PARAMETER(wait_to_complete);
+
+ /* If we were hit with a reset drop the link */
+ if (!mbx->check_for_rst(hw, 0) || !mbx->timeout)
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ links_reg = rd32(hw, NGBE_VFSTATUS);
+ if (!(links_reg & NGBE_VFSTATUS_BW_MASK))
+ goto out;
+
+ /* for SFP+ modules and DA cables it can take up to 500usecs
+ * before the link status is correct
+ */
+ if (mac->type == ngbe_mac_em_vf) {
+ if (po32m(hw, NGBE_VFSTATUS, NGBE_VFSTATUS_BW_MASK,
+ 0, NULL, 5, 100))
+ goto out;
+ }
+
+ if (links_reg & NGBE_VFSTATUS_BW_1G)
+ *speed = NGBE_LINK_SPEED_1GB_FULL;
+ else if (links_reg & NGBE_VFSTATUS_BW_100M)
+ *speed = NGBE_LINK_SPEED_100M_FULL;
+ else if (links_reg & NGBE_VFSTATUS_BW_10M)
+ *speed = NGBE_LINK_SPEED_10M_FULL;
+ else
+ *speed = NGBE_LINK_SPEED_UNKNOWN;
+
+ if (no_pflink_check) {
+ if (*speed == NGBE_LINK_SPEED_UNKNOWN)
+ mac->get_link_status = true;
+ else
+ mac->get_link_status = false;
+
+ goto out;
+ }
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error
+ */
+ if (mbx->read(hw, &in_msg, 1, 0))
+ goto out;
+
+ if (!(in_msg & NGBE_VT_MSGTYPE_CTS)) {
+ /* msg is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & NGBE_VT_MSGTYPE_NACK)
+ ret_val = -1;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
+ ret_val = -1;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link
+ */
+ mac->get_link_status = false;
+
+out:
+ *link_up = !mac->get_link_status;
+ return ret_val;
+}
+
/**
* ngbevf_rlpml_set_vf - Set the maximum receive packet length
* @hw: pointer to the HW structure
@@ -471,6 +564,9 @@ s32 ngbe_init_ops_vf(struct ngbe_hw *hw)
mac->get_mac_addr = ngbe_get_mac_addr_vf;
mac->negotiate_api_version = ngbevf_negotiate_api_version;
+ /* Link */
+ mac->check_link = ngbe_check_mac_link_vf;
+
/* RAR, Multicast, VLAN */
mac->set_rar = ngbe_set_rar_vf;
mac->set_uc_addr = ngbevf_set_uc_addr_vf;
diff --git a/drivers/net/ngbe/base/ngbe_vf.h b/drivers/net/ngbe/base/ngbe_vf.h
index 596f41dcb0..5cf225dd35 100644
--- a/drivers/net/ngbe/base/ngbe_vf.h
+++ b/drivers/net/ngbe/base/ngbe_vf.h
@@ -17,6 +17,8 @@ s32 ngbe_start_hw_vf(struct ngbe_hw *hw);
s32 ngbe_reset_hw_vf(struct ngbe_hw *hw);
s32 ngbe_stop_hw_vf(struct ngbe_hw *hw);
s32 ngbe_get_mac_addr_vf(struct ngbe_hw *hw, u8 *mac_addr);
+s32 ngbe_check_mac_link_vf(struct ngbe_hw *hw, u32 *speed,
+ bool *link_up, bool autoneg_wait_to_complete);
s32 ngbe_set_rar_vf(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
s32 ngbevf_set_uc_addr_vf(struct ngbe_hw *hw, u32 index, u8 *addr);
diff --git a/drivers/net/ngbe/ngbe_ethdev_vf.c
b/drivers/net/ngbe/ngbe_ethdev_vf.c
index e1ba8b02d2..01e9d5d8ee 100644
--- a/drivers/net/ngbe/ngbe_ethdev_vf.c
+++ b/drivers/net/ngbe/ngbe_ethdev_vf.c
@@ -18,6 +18,8 @@
#define NGBEVF_PMD_NAME "rte_ngbevf_pmd" /* PMD name */
static int ngbevf_dev_close(struct rte_eth_dev *dev);
+static int ngbevf_dev_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete);
static void ngbevf_intr_disable(struct rte_eth_dev *dev);
static void ngbevf_intr_enable(struct rte_eth_dev *dev);
static int ngbevf_vlan_offload_config(struct rte_eth_dev *dev, int mask);
@@ -345,6 +347,12 @@ ngbevf_dev_info_get(struct rte_eth_dev *dev,
return 0;
}
+static int
+ngbevf_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ return ngbe_dev_link_update_share(dev, wait_to_complete);
+}
+
static void
ngbevf_intr_disable(struct rte_eth_dev *dev)
{
@@ -939,6 +947,7 @@ ngbevf_dev_interrupt_handler(void *param)
*/
static const struct eth_dev_ops ngbevf_eth_dev_ops = {
.dev_configure = ngbevf_dev_configure,
+ .link_update = ngbevf_dev_link_update,
.promiscuous_enable = ngbevf_dev_promiscuous_enable,
.promiscuous_disable = ngbevf_dev_promiscuous_disable,
.allmulticast_enable = ngbevf_dev_allmulticast_enable,
--
2.21.0.windows.1
