Hi Husainee, Looking at your config file, looks like you are using an old DPDK release prior to 2.1, can you please try out same simple test in your environment for latest DPDK 2.1 release?
We did a lot of work in DPDK release 2.1 for the ip_pipeline application, we basically rewrote large parts of it, including the parser, checks, run-time, library of pipelines, etc. The format of the config file has been improved a lot, you should be able to adapt your config file to the latest syntax very quickly. Btw, you config file is not really equivalent to the l2fwd, as you are using two CPU cores connected through software rings rather than a single core, as l2fwd. Here is an equivalent DPDK 2.1 config file using two cores connected through software rings (port 0 -> port 1, port 1-> port 0, port 2 -> port 3, port 3 -> port2): [PIPELINE0] type = MASTER core = 0 [PIPELINE1] type = PASS-THROUGH core = 1 pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0 pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 [PIPELINE2] type = PASS-THROUGH core = 2; you can also place PIPELINE2 on same core as PIPELINE1: core = 1 pktq_in = SWQ1 SWQ0 SWQ3 SWQ2 pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 Here is an config file doing similar processing with a single core, closer configuration to l2fwd (port 0 -> port 1, port 1-> port 0, port 2 -> port 3, port 3 -> port2): [PIPELINE0] type = MASTER core = 0 [PIPELINE1] type = PASS-THROUGH core = 1 pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0 pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0 Regards, Cristian From: husainee [mailto:husainee.plum...@nevisnetworks.com] Sent: Wednesday, September 9, 2015 12:47 PM To: Dumitrescu, Cristian; dev at dpdk.org Cc: Cao, Waterman Subject: Re: [dpdk-dev] Random packet drops with ip_pipeline on R730. Hi Cristian PFA the config file. I am sending packets from port0 and receiving on port1. By random packet drops I mean, on every run the number of packets dropped is not same. Here are some results as below. Frame sent rate 1488095.2 fps, 64Byte packets (100% of 1000Mbps) Run1- 0.0098% (20-22 Million Packets) Run2- 0.021% (20-22 Million Packets) Run3- 0.0091% (20-22 Million Packets) Frame rate 744047.62 fps, 64 Byte packets, (50% of 1000Mbps) Run1- 0.0047% (20-22 Million Packets) Run2- 0.0040% (20-22 Million Packets) Run3- 0.0040% (20-22 Million Packets) Frame rate 148809.52 fps, 64 Byte packets,(10% of 1000Mbps) Run1- 0 (20-22 Million Packets) Run2- 0 (20-22 Million Packets) Run3- 0 (20-22 Million Packets) Following are the hw nic setting differences btw ip_pipeline and l2fwd app. parameter ip_pipeline l2fwd jumbo frame 1 0 hw_ip_checksum 1 0 rx_conf. wthresh 4 0 rx_conf.rx_free_thresh 64 32 tx_conf.pthresh 36 32 burst size 64 32 We tried to make the ip_pipeline settings same as l2fwd but no change in results. I have not tried with 10GbE . I do not have 10GbE test equipment. regards husainee On 09/08/2015 06:32 PM, Dumitrescu, Cristian wrote: Hi Husainee, Can you please explain what do you mean by random packet drops? What percentage of the input packets get dropped, does it take place on every run, does the number of dropped packets vary on every run, etc? Are you also able to reproduce this issue with other NICs, e.g. 10GbE NIC? Can you share your config file? Can you please double check the low level NIC settings between the two applications, i.e. the settings in structures link_params_default, default_hwq_in_params, default_hwq_out_params from ip_pipeline file config_parse.c vs. their equivalents from l2fwd? The only thing I can think of right now is maybe one of the low level threshold values for the Ethernet link is not tuned for your 1GbE NIC. Regards, Cristian -----Original Message----- From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of husainee Sent: Tuesday, September 8, 2015 7:56 AM To: dev at dpdk.org<mailto:dev at dpdk.org> Subject: [dpdk-dev] Random packet drops with ip_pipeline on R730. Hi I am using a DELL730 with Dual socket. Processor in each socket is Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz- 6Cores. The CPU layout has socket 0 with 0,2,4,6,8,10 cores and socket 1 with 1,3,5,7,9,11 cores. The NIC card is i350. The Cores 2-11 are isolated using isolcpus kernel parameter. We are running the ip_peipeline application with only Master, RX and TX threads (Flow and Route have been removed from cfg file). The threads are run as follows - Master on CPU core 2 - RX on CPU core 4 - TX on CPU core 6 64 byte packets are sent from ixia at different speeds, but we are seeing random packet drops. Same excercise is done on core 3,5,7 and results are same. We tried the l2fwd app and it works fine with no packet drops. Hugepages per 1024 x 2M per socket. Can anyone suggest what could be the reason for these random packet drops. regards husainee
