Hi Francesco, On 08/28/2015 11:06 AM, Montorsi, Francesco wrote: > Hi all, > > I found that after unzipping dpdk-2.1.0.tar.gz if I run: > # make T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc > config > And then > # make V=1 T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc > clean > > I get: > > [...] > == Clean app/proc_info > make -f /home/fmontorsi/Downloads/dpdk-2.1.0/GNUmakefile gcovclean > make -f /home/fmontorsi/Downloads/dpdk-2.1.0/mk/rte.sdkgcov.mk gcovclean > /home/fmontorsi/Downloads/dpdk-2.1.0/mk/rte.sdkgcov.mk:34: *** "Cannot use T= > with gcov target". Stop. > make[2]: *** [gcovclean] Error 2 > make[1]: *** [clean] Error 2 > make: *** [clean] Error 2 > > I guess the fix is: > > --- /home/fmontorsi/Downloads/dpdk-2.1.0/mk/rte.sdkbuild.mk 2015-08-17 > 19:35:37.000000000 +0200 > +++ dpdk-2.1.0/mk/rte.sdkbuild.mk 2015-08-28 10:52:56.092466418 +0200 > @@ -85,5 +85,7 @@ > @$(RTE_SDK)/scripts/gen-config-h.sh $(RTE_OUTPUT)/.config \ > > $(RTE_OUTPUT)/include/rte_config.h > +ifndef T > $(Q)$(MAKE) -f $(RTE_SDK)/GNUmakefile gcovclean > +endif > @echo Clean complete > > > Let me know if the patch above is wrong or I should do something else to > contribute it to the project in the right way.
I had a look to your test case, I think the second command is not correct. The T= parameter is not allowed for the clean target. It should be something like this: # configure a workspace using template specified by T= in the # directory specified by O= make T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc config # clean the directory specified by O= make O=x86_64-native-linuxapp-gcc clean See "make help" for details. I think the proper patch would be to add the following lines on the top of rte.sdkbuild.mk: ifdef T ifeq ("$(origin T)", "command line") $(error "Cannot use T= with a build/clean target") endif endif It would then display the proper error message. Can you have a try? Regards, Olivier