Good catch!

Reviewed-by: Nicholas Pratte <npra...@iol.unh.edu>

On Tue, Aug 13, 2024 at 1:17 PM Dean Marx <dm...@iol.unh.edu> wrote:
>
> correct docstring error in conf.yaml showing incorrect
> example pci address for TG nodes
>
> Signed-off-by: Dean Marx <dm...@iol.unh.edu>
> ---
>  dts/conf.yaml | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/dts/conf.yaml b/dts/conf.yaml
> index 7d95016e68..ca5e87636e 100644
> --- a/dts/conf.yaml
> +++ b/dts/conf.yaml
> @@ -39,13 +39,13 @@ nodes:
>          number_of: 256
>          force_first_numa: false
>      ports:
> -      # sets up the physical link between "SUT 1"@000:00:08.0 and "TG 
> 1"@0000:00:08.0
> +      # sets up the physical link between "SUT 1"@0000:00:08.0 and "TG 
> 1"@0000:00:08.0
>        - pci: "0000:00:08.0"
>          os_driver_for_dpdk: vfio-pci # OS driver that DPDK will use
>          os_driver: i40e              # OS driver to bind when the tests are 
> not running
>          peer_node: "TG 1"
>          peer_pci: "0000:00:08.0"
> -      # sets up the physical link between "SUT 1"@000:00:08.1 and "TG 
> 1"@0000:00:08.1
> +      # sets up the physical link between "SUT 1"@0000:00:08.1 and "TG 
> 1"@0000:00:08.1
>        - pci: "0000:00:08.1"
>          os_driver_for_dpdk: vfio-pci
>          os_driver: i40e
> @@ -59,13 +59,13 @@ nodes:
>      arch: x86_64
>      os: linux
>      ports:
> -      # sets up the physical link between "TG 1"@000:00:08.0 and "SUT 
> 1"@0000:00:08.0
> +      # sets up the physical link between "TG 1"@0000:00:08.0 and "SUT 
> 1"@0000:00:08.0
>        - pci: "0000:00:08.0"
>          os_driver_for_dpdk: rdma
>          os_driver: rdma
>          peer_node: "SUT 1"
>          peer_pci: "0000:00:08.0"
> -      # sets up the physical link between "SUT 1"@000:00:08.0 and "TG 
> 1"@0000:00:08.0
> +      # sets up the physical link between "SUT 1"@0000:00:08.0 and "TG 
> 1"@0000:00:08.0
>        - pci: "0000:00:08.1"
>          os_driver_for_dpdk: rdma
>          os_driver: rdma
> --
> 2.44.0
>

Reply via email to