On Mon, Jun 17, 2024 at 3:47 PM Dean Marx <dm...@iol.unh.edu> wrote: > > This suite tests the ability of the Poll Mode Driver to enable and disable > Rx/Tx queues on a port. > > Signed-off-by: Dean Marx <dm...@iol.unh.edu> > --- > dts/tests/TestSuite_queue_start_stop.py | 79 +++++++++++++++++++++++++ > 1 file changed, 79 insertions(+) > create mode 100644 dts/tests/TestSuite_queue_start_stop.py > > diff --git a/dts/tests/TestSuite_queue_start_stop.py > b/dts/tests/TestSuite_queue_start_stop.py > new file mode 100644 > index 0000000000..e180b916e8 > --- /dev/null > +++ b/dts/tests/TestSuite_queue_start_stop.py > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: BSD-3-Clause > +# Copyright(c) 2024 University of New Hampshire > + > +"""Rx/Tx queue start and stop functionality suite. > + > +This suite tests the ability of the poll mode driver to start and > +stop either the Rx or Tx queue (depending on the port) during runtime, > +and verify that packets are not received when one is disabled.
I wonder if there is instead a way to validate that either packets aren't received on the port if Rx is disabled, or packets aren't sent if Tx is disabled rather than just showing that the full flow doesn't happen. I'm not sure the test really calls for it, but it might better show how the individual cases interact. > + > +Given a paired port topology, the Rx queue will be disabled on port 0, > +and the Tx queue will be disabled on port 1. > + > +""" > + > +from scapy.layers.inet import IP # type: ignore[import] > +from scapy.layers.l2 import Ether # type: ignore[import] > +from scapy.packet import Raw # type: ignore[import] > + > +from framework.remote_session.testpmd_shell import TestPmdForwardingModes, > TestPmdShell > +from framework.test_suite import TestSuite > + > +class TestQueueStartStop(TestSuite): > + """DPDK Queue start/stop test suite. > + > + Ensures Rx/Tx queue on a port can be disabled and enabled. > + Verifies packets are not received when either queue is disabled. > + """ I think this doc-string would benefit from some more in-depth information about how the individual cases are tested and what they are. > + > + def set_up_suite(self) -> None: > + """Set up the test suite. > + > + Setup: > + Create a testpmd session and set up tg nodes We don't seem to be creating a testpmd shell or touching the TG in this setup method, so we should probably not include this line. > + verify that at least two ports are open for session Missing period at the end of this line. > + """ > + self.verify(len(self._port_links) > 1, "Not enough ports") > + > + def send_packet_and_verify(self, should_receive: bool = True): > + """Generate a packet, send to the DUT, and verify it is forwarded > back. > + > + Args: > + should_receive: indicate whether the packet should be received > + """ > + packet = Ether()/IP()/Raw(load="xxxxx") > + received = self.send_packet_and_capture(packet) > + test_packet = None > + for packet in received: > + if packet.haslayer(Raw) and packet[Raw].load == b'xxxxx': > + test_packet = packet > + break This feels very similar to what is happening in the VLAN test suite and if probably a good reason to sooner address this bugzilla ticket: https://bugs.dpdk.org/show_bug.cgi?id=1372 That's probably better done in another patch though. Regardless, I still think this could be done using the any() method that's built into python and it might be more concise. > + if should_receive: > + self.verify(test_packet is not None, "Packet was dropped when it > should have been received") > + else: > + self.verify(test_packet is None, "Packet was received when it > should have been dropped") > + > + def test_all_queues_enabled(self) -> None: > + """Ensure packets are received when both Tx and Rx queues are > enabled. This method name and doc-string are confusing as it seems you are testing more than if it can receive traffic when the queues are enabled. It looks like you're actually also testing that the Rx and Tx don't function when they are stopped. These could also probably be different test cases as they are really testing two different things (Rx functionality vs Tx). > + > + Test: > + Create an interactive testpmd session, stop Rx queue on port 0, > verify > + packets are dropped. Then start port 0 Rx queue, stop port 1 Tx > queue, and > + verify packets are dropped.""" > + testpmd = self.sut_node.create_interactive_shell(TestPmdShell, > privileged=True) > + testpmd.set_forward_mode(TestPmdForwardingModes.mac) > + testpmd.stop_port_queue(0, 0, True) > + > + testpmd.start() > + self.send_packet_and_verify(False) > + testpmd.stop() > + > + testpmd.start_port_queue(0, 0, True) > + testpmd.stop_port_queue(1, 0, False) > + > + testpmd.start() > + self.send_packet_and_verify(False) > + testpmd.close() > + > + def tear_down_suite(self) -> None: > + """Tear down the suite.""" This method stub isn't needed since it isn't extended here. > -- > 2.44.0 >
