Hi, > -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Yong Liu > Sent: Thursday, October 29, 2015 5:19 PM > To: dev at dpdk.org > Subject: [dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000 > > This patch set will enable interrup for physical and emulated e1000 device. > Rx queue interrupt will work with uio driver or vfio driver with msi mode. > l3fwd-power will disable interrupt immediately when wake-up for that e1000 not > support interrupt auto clear. > LSC and rxq interrupt will be seperated for e1000 can only support one > interrupt cause in the same time. > > The patch set is developed based on one previous patch set > "[PATCH v1 00/11] interrupt mode for i40e" > http://www.dpdk.org/ml/archives/dev/2015-September/023903.html > > v3 changes: > add in release note > > v2 changes: > describe interrupt mode work with uio and vfio+msi > replace attribuite __unused__ with __rte_unused > > Marvin Liu (8): > e1000: add rx interrupt support > e1000: separate lsc and rxq interrupt disable function > e1000: add ethdev rxq enable and disable function > e1000: add rxq interrupt handler > e1000: check lsc and rxq not enable in the same time > e1000: lsc interrupt setup function only enable itself > l3fwd-power: disable interrupt when wake up from sleep > doc: release note update for e1000 intr mode > > doc/guides/rel_notes/release_2_2.rst | 1 + > drivers/net/e1000/em_ethdev.c | 181 > +++++++++++++++++++++++++++++++---- > examples/l3fwd-power/main.c | 1 + > 3 files changed, 164 insertions(+), 19 deletions(-) > > -- > 1.9.3
Acked-by: Cunming Liang <cunming.liang at intel.com>
